- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: IMI STI
IMI STI SRQ-16-S1-00-S-666-S Quick Exhaust Valve 1 inch
Description
IMI STI SRQ-16-S1-00-S-666-S overview
The IMI STI SRQ-16-S1-00-S-666-S is a model code of the IMI STI SRQ quick exhaust valve. The SRQ is used together with solenoid valves or positioners wherever a quick opening or closing function is needed. It raises the actuator speed without hunting because the air leaving the actuator is exhausted to atmosphere directly from the large outlet of the derivative unit and not through the positioner.
Where very high actuator speed is needed, the manual states that two derivative units can be installed in parallel on the same line. Reading the code: size 16 is 1 inch, material S1 is stainless steel 316, copper free execution, painting 00 is not painted, temperature letter S is -20 to +70 degC, connection code 666 gives 1 inch supply, 1 inch actuator and 1 inch exhaust, and option S is standard flow bypass. The manual lists the model with the part number 167631.
The IMI STI SRQ-16-S1-00-S-666-S model code is taken from the existing-products table of the manufacturer’s instruction manual, which lists each model with an IMI STI part number (167631). Quoting the full code matters because the same family is built in several sizes, materials, temperature ranges and options, and only the complete code identifies the exact unit.
Key features of the SRQ-16-S1-00-S-666-S
- Quick exhaust function for fast actuator opening or closing
- Air leaves the actuator through the large derivative unit outlet, not through the positioner
- Used with solenoid valves or positioners without causing hunting
- 1 inch body in stainless steel 316, copper free execution
- Connection code 666: 1 inch supply, 1 inch actuator and 1 inch exhaust
- Bypass option S: standard flow bypass
- Working pressure 3 to 10.5 bar with design pressure 12 bar
- CV out maximum 9 listed for the family
SRQ-16-S1-00-S-666-S technical specifications
The table below lists the data for the SRQ-16-S1-00-S-666-S taken from the manufacturer’s published documents. Values that are not stated by the manufacturer are left out on purpose.
| Model code | SRQ-16-S1-00-S-666-S |
|---|---|
| IMI STI part number (manual) | 167631 |
| Size | 1 inch |
| Body material | Stainless steel 316, copper free execution |
| Painting | Not painted (code 00) |
| Temperature code | S: -20 to +70 degC |
| Connections | Code 666: 1 inch supply, 1 inch actuator and 1 inch exhaust |
| Bypass option | S: Standard flow bypass |
| Working pressure | 3 bar minimum, 10.5 bar maximum |
| Design pressure | 12 bar |
| CV out maximum (family) | 9 |
| Extended temperature (family) | -60 to +100 degC |
| Storage temperature (family) | -40 to +95 degC |
| Fluid | Air |
| Lifetime | 30 years |
The SRQ family also offers an aluminum body, painted finishes and other temperature codes; not every combination is available, so confirm the code before ordering.
Typical applications in oil and gas, utilities, water and manufacturing
Power and desalination plants use the SRQ-16-S1-00-S-666-S where reliable control or safety stroking is needed on steam, feedwater, bypass and cooling circuits. Utilities and water treatment operators also use this type of equipment for dampers, control valves and isolation valves driven by instrument air, and the SRQ-16-S1-00-S-666-S helps maintenance teams keep like-for-like replacements on the shelf.
In oil and gas facilities in Oman and across the GCC, the SRQ-16-S1-00-S-666-S is typically found on fast-acting emergency shutdown and anti-surge actuators. Pneumatic accessories decide how fast and how stably an actuator strokes, so they are specified together with the actuator and positioner. Production, gathering and processing sites in the desert and offshore installations value equipment whose behaviour is well documented and whose spare parts can be identified by a clear part number.
Refineries, petrochemical units and general manufacturing plants apply the SRQ-16-S1-00-S-666-S to dump actuator air quickly for fast opening or closing strokes and trip service. Because the exact configuration affects performance, engineers normally confirm the supply pressure, temperature range and connection arrangement against the nameplate of the existing equipment before ordering.
Selection and compatibility notes for the SRQ-16-S1-00-S-666-S
Match the SRQ-16-S1-00-S-666-S connection code to the actuator ports: 1 inch supply, 1 inch actuator and 1 inch exhaust. The manual lists SRQ sizes of 3/8 inch and 1 inch, with a 3/8 inch body suited to smaller actuators and the 1 inch body to larger volumes.
The bypass option decides how the valve behaves in modulating service. Option S on the SRQ-16-S1-00-S-666-S is standard flow bypass. The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines.
Check the supply medium and pressure, the ambient temperature range and any hazardous-area requirement before ordering the SRQ-16-S1-00-S-666-S. If a certificate or approval is needed for the installation in Oman or elsewhere in the GCC, state it in the request so that it can be checked against the manufacturer’s documents rather than assumed.
Installation and commissioning of the SRQ-16-S1-00-S-666-S
Install the SRQ-16-S1-00-S-666-S in the pneumatic circuit using the connection layout of its model code. Use clean instrument air, support the tubing so that no load acts on the body, and check all joints for leakage. Adjust any setting screw gradually, measure the actuator stroking time, and lock the screw once the required time is reached.
The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines. Keep exhaust lines free of restrictions that the design does not intend, because a blocked exhaust changes the stroking time.
Record the model code, the part number and the final settings of the SRQ-16-S1-00-S-666-S on the commissioning sheet so that future maintenance and any reorder can refer to the same data.
Maintenance and service for the SRQ-16-S1-00-S-666-S
When a unit fails, identify the exact model code and part number from the nameplate before ordering a replacement. For the SRQ-16-S1-00-S-666-S this removes the risk of receiving a body with a different size, material or temperature range.
Plan periodic inspection of the SRQ-16-S1-00-S-666-S according to the instruction manual of the manufacturer. Typical checks are leakage at joints, condition of the air supply, mechanical wear or contamination, and confirmation that the setting still gives the required response.
Poor air quality is the most common cause of pneumatic accessory problems, so keep filter regulators and dryers serviced upstream of the SRQ-16-S1-00-S-666-S. Replace elastomer parts only with the materials specified for the application, and do not modify the unit in the field.
Related products and ordering notes for the SRQ-16-S1-00-S-666-S
Items that are commonly specified together with the SRQ-16-S1-00-S-666-S include: SR quick exhaust valve, ER exhaust regulator, FCV flow control valve, BV big volume booster, FT FasTrak positioner. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; product names and part numbers are used only to identify the items offered.
Lead times, availability and alternatives depend on the stock position at the time of the request. If the SRQ-16-S1-00-S-666-S is not the exact configuration needed, send the nameplate data and we will suggest the closest match from the manufacturer’s published model selection.
SRQ-16-S1-00-S-666-S frequently asked questions
What does the SRQ-16-S1-00-S-666-S do? It is a quick exhaust valve used with solenoids or positioners to speed up actuator stroking by exhausting the actuator air directly from its large outlet.
What do the S and L options mean? In the SRQ model selection, S is standard flow bypass and L is low flow bypass. This code carries option S.
What is the manufacturer part number for the SRQ-16-S1-00-S-666-S? The instruction manual lists the model SRQ-16-S1-00-S-666-S with the part number 167631.
Can two units be used together? The manual states that where a very high actuator speed is required, two derivative units can be installed in parallel on the same line.
How do I order the SRQ-16-S1-00-S-666-S? Send the part number SRQ-16-S1-00-S-666-S with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.
Documents and quotation
The manufacturer’s manual for the SRQ-16-S1-00-S-666-S is available from Seven Star LLC on request and is listed on this page for download. It should be read together with the nameplate data of the installed equipment.
To request a quotation, send an RFQ with the part number SRQ-16-S1-00-S-666-S, the quantity, the required delivery location in Oman or the GCC, and any special requirement such as certification or documentation. We will reply with availability and commercial terms.
Other Models in the SRQ Range
Seven Star LLC supplies models from the SRQ range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| IMI STI SRQ-06-S1-00-S-332-L Quick Exhaust Valve 3/8 inch | Automation Accessories | View details |
| IMI STI SRQ-06-S1-00-S-332-S Quick Exhaust Valve 3/8 inch | Automation Accessories | View details |
| IMI STI SRQ-06-S1-00-S-334-L Quick Exhaust Valve 3/8 inch | Automation Accessories | View details |
| IMI STI SRQ-06-S1-00-S-334-S Quick Exhaust Valve 3/8 inch | Automation Accessories | View details |
| IMI STI SRQ-16-S1-00-S-666-S Quick Exhaust Valve 1 inch | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Manual IMI STI SRQ-16-S1-00-S-666-S Quick Exhaust Valve 1 inch Manual Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).
Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.
IMI STI company profile
| Established | 1960, in Gorle (Bergamo), Italy |
|---|---|
| Manufacturing site | Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site. |
| Group | IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name. |
| Product families | Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories |
| Typical duty | Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves |
| Industries | Oil and gas, power, petrochemicals, process industries, water and metals |
Milestones
- 1960: STI is founded in Gorle, Bergamo.
- 2002: IMI plc acquires STI, according to the company's own literature.
- 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.
IMI STI product series
| Series | Type | Key published data |
|---|---|---|
| RTC | Pneumatic Scotch yoke quarter-turn actuator | Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M |
| RTQ | High-torque pneumatic Scotch yoke actuator | For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke |
| RTQD / RTQH | Direct-gas and hydraulic Scotch yoke actuators | RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply |
| SC/V, SC | Pneumatic linear actuators | For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version |
| SHP | Smart high-performance positioner | HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing |
| SHP-SIS | Safety positioner | IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient |
| FasTrak FT, QuickTrak | Smart digital positioners and valve control systems | Digital positioning with valve diagnostics |
| SA/CL | Analog positioner | Analog positioner for control valve actuators |
| 2130 | Limit switch box | Position feedback for rotary valve actuators |
Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.
Where IMI STI products are used
In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.
Ordering and replacement: what we need
For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.
Facts checked against IMI Process Automation product pages and published company history, October 2026.
Browse IMI STI products by category: Valve Positioners, Valve Actuators.
FAQ
Questions about the IMI STI SRQ-16-S1-00-S-666-S Quick Exhaust Valve 1
Answers from our engineering team on installation, compatibility and integration.
01What does the SRQ-16-S1-00-S-666-S do?
It is a quick exhaust valve used with solenoids or positioners to speed up actuator stroking by exhausting the actuator air directly from its large outlet.
02What do the S and L options mean?
In the SRQ model selection, S is standard flow bypass and L is low flow bypass. This code carries option S.
03What is the manufacturer part number for the SRQ-16-S1-00-S-666-S?
The instruction manual lists the model SRQ-16-S1-00-S-666-S with the part number 167631.
04Can two units be used together?
The manual states that where a very high actuator speed is required, two derivative units can be installed in parallel on the same line.
05How do I order the SRQ-16-S1-00-S-666-S?
Send the part number SRQ-16-S1-00-S-666-S with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.


















Reviews
There are no reviews yet.