Brand:

IMI STI DE/3M-3 Heavy Duty Analog Valve Positioner

Description

DE/3M-3 heavy duty analog positioner for linear valve actuators

The IMI STI DE/3M-3 is an analog valve positioner built for control valves that sit on linear pneumatic actuators in tough plants. It comes in two forms: a purely pneumatic unit that follows a 3-15 psi (0.2-1 bar) signal, and an electro-pneumatic unit that follows a 4-20 mA signal through an I/P converter fitted on the pneumatic body. Seven Star LLC supplies the DE/3M-3 in Oman and the GCC as an independent supplier in Muscat, for plants that need to keep an existing IMI STI loop running or specify a rugged analog positioner for a new valve.

How to read the DE/3M-3 designation

The manufacturer brochure covers the family under one name and distinguishes the two signal versions by weight and electrical connection rather than by a long ordering string. In practice you will meet two variants of the DE/3M-3 platform:

  • DE/3M-3 (pneumatic) – 3-15 psi pilot signal, no electrical connection, 1.8 kg.
  • DE/3M-3 EP (electro-pneumatic) – 4-20 mA signal, I/P converter on the body, 1/2" NPTF electrical connection, 2.3 kg.

Intrinsically safe and explosion proof electro-pneumatic versions are listed as options, as are pressure gauges. Because those choices are fixed at order time, always state the signal type and the hazardous-area requirement when you ask for a quotation.

Technical specifications of the DE/3M-3

Parameter Specification
Manufacturer / part number IMI STI / DE/3M-3
Type Analog valve positioner, double acting (usable as single acting)
Signal 3-15 psi pneumatic, or 4-20 mA with I/P converter
Housing material Anodized aluminum
Enclosure protection IP65
Operating supply pressure 2.5 bar minimum, 7 bar maximum; design pressure 10 bar
Air connections Supply and output ND 1/4"; pilot signal 1/4" NPTF
Electrical connection (I/P version) 1/2" NPTF
Flow coefficient (low flow, max) Cv 0.12 inlet and 0.12 outlet
Static air consumption 0.4 Nm³/h (0.25 SCFM) at 400 kPa (60 psi); I/P converter adds 0.09 Nm³/h (0.06 SCFM)
Sensitivity 0.2% of signal range
Linearity 1% of full stroke
Hysteresis 0.5% of full stroke
Operating temperature -20 °C to +70 °C; -40 °C to +85 °C available on request
Actuator stroke Linear actuators up to 300 mm
Weight 1.8 kg pneumatic; 2.3 kg electro-pneumatic

How the DE/3M-3 positions a valve

The positioner works on the balanced-forces principle. The input signal, pneumatic or converted from 4-20 mA, produces a force that is compared with the force generated by the valve stem position fed back through the positioner. When the two forces differ, an internal spool valve moves and sends supply air to one side of the actuator while venting the other. The stem travels until the forces balance again, at which point the spool returns to its neutral position and the actuator holds.

The brochure describes a feedback system that does not use a lever or arm, which removes a common wear and misalignment point in vibrating installations. Because the unit is double acting by design, it drives both chambers of a piston actuator for stiff, repeatable positioning, and it can be set up as single acting when a spring-return actuator is used. Split-range operation is supported, which lets two valves share one controller output.

Where the DE/3M-3 fits in the control loop

The DE/3M-3 is the final element interface between the controller and the valve actuator. It is used on pneumatic valve sets in oil and gas, refining, chemical, power and metal production plants. IMI STI positions the product for standard conditions, for sandstorm exposure and for copper-free ambient conditions, and for both low and high ambient temperatures, which are all relevant to Gulf sites.

Other IMI STI analog positioners in the range include the UP-2, SA/CL and SR/CCK, and the same maker offers the SHP smart positioner and the DigitalTrak compact digital positioner. If your loop already uses digital communication or you need partial stroke testing, those alternatives should be compared before choosing an analog unit.

Selection and ordering checklist for the DE/3M-3

  • Signal type: pneumatic 3-15 psi or electro-pneumatic 4-20 mA.
  • Hazardous area: standard, intrinsically safe or explosion proof electro-pneumatic version.
  • Actuator: linear stroke, up to 300 mm; standard stroke values on the drawing are 125, 150 and 200 mm.
  • Action: double acting or single acting service.
  • Supply air: clean, dry instrument air within 2.5 to 7 bar.
  • Ambient range: standard -20 °C to +70 °C, or the extended -40 °C to +85 °C version on request.
  • Accessories: supply and output pressure gauges.

Installation, calibration and maintenance of the DE/3M-3

Mount the positioner on the actuator bracket so the feedback system sees the full stem travel, then connect supply air to the 1/4" supply port and the two output ports to the actuator chambers. On the electro-pneumatic version, wire the 4-20 mA loop through the 1/2" NPTF entry and seal the entry according to the area classification. Calibrate zero and span with the valve stroking from its closed to open position, then check linearity and hysteresis against the 1% and 0.5% figures in the table.

Supply air quality decides how long a spool positioner lasts. Filter and dry the instrument air, drain filter regulators regularly and keep an eye on static consumption, since a rise above the 0.4 Nm³/h reference is an early sign of worn seals. For critical valves, keep a spare positioner and a spare I/P assembly on the shelf so the loop is back in service quickly.

Typical DE/3M-3 applications in Oman and the GCC

Gulf plants put positioners through high ambient heat, wind-blown sand and salty humidity. The anodized aluminum body and IP65 enclosure of the DE/3M-3, together with the sandstorm and copper-free conditions the maker lists, suit control valves on wellhead and gathering facilities, refinery and petrochemical units, power plant water and steam services, and desalination and utility systems. It is also a practical replacement positioner for older pneumatic linear actuators where a lever-free feedback design is wanted.

Information to send with an RFQ for the DE/3M-3

  • Signal version (pneumatic or 4-20 mA) and quantity.
  • Area classification and required certificates.
  • Actuator make, model and stroke length.
  • Supply pressure and ambient temperature range.
  • Tubing and conduit thread preferences, gauges required.
  • Project name, delivery location and timeline.

Documents and quotation

A manufacturer brochure for the DE/3M-3 is attached on this page and covers the specification table, options and dimensional drawing. Please check it against your valve data sheet before ordering.

Send us the part number DE/3M-3, the signal version and your actuator details, and Seven Star LLC will confirm availability and lead time for Oman and the GCC.

Other Models in the Sti Positioner Analog Range

Seven Star LLC supplies models from the Sti Positioner Analog range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
IMI STI SR/CCK Analog Quarter-Turn Valve PositionerValve PositionersView details
IMI STI CRP-3/M Analog Valve PositionerValve PositionersView details
IMI STI UP-2 Analog Valve PositionerValve PositionersView details
IMI STI DE/3M-3 Heavy Duty Analog Valve PositionerValve PositionersYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).

Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.

IMI STI company profile

Established 1960, in Gorle (Bergamo), Italy
Manufacturing site Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site.
Group IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name.
Product families Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories
Typical duty Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves
Industries Oil and gas, power, petrochemicals, process industries, water and metals

Milestones

  • 1960: STI is founded in Gorle, Bergamo.
  • 2002: IMI plc acquires STI, according to the company's own literature.
  • 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.

IMI STI product series

Series Type Key published data
RTC Pneumatic Scotch yoke quarter-turn actuator Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M
RTQ High-torque pneumatic Scotch yoke actuator For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke
RTQD / RTQH Direct-gas and hydraulic Scotch yoke actuators RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply
SC/V, SC Pneumatic linear actuators For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version
SHP Smart high-performance positioner HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing
SHP-SIS Safety positioner IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient
FasTrak FT, QuickTrak Smart digital positioners and valve control systems Digital positioning with valve diagnostics
SA/CL Analog positioner Analog positioner for control valve actuators
2130 Limit switch box Position feedback for rotary valve actuators

Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.

Where IMI STI products are used

In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.

Ordering and replacement: what we need

For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.

Facts checked against IMI Process Automation product pages and published company history, October 2026.

FAQ

Questions about the IMI STI DE/3M-3 Heavy Duty Analog Valve Positioner

Answers from our engineering team on installation, compatibility and integration.

01What input signals does the DE/3M-3 accept?
The pneumatic version accepts a 3-15 psi (0.2-1 bar) signal. The electro-pneumatic version accepts 4-20 mA, which an I/P converter on the body turns into a pneumatic pilot. Split-range use is possible.
02What supply pressure does the DE/3M-3 need?
Operating supply pressure is 2.5 bar minimum to 7 bar maximum, with a design pressure of 10 bar. Use clean, dry instrument air.
03Can the DE/3M-3 drive a single acting actuator?
Yes. It is designed as double acting but can be used as single acting. It is intended for linear actuators with a stroke of up to 300 mm.
04What ambient temperature range applies?
The standard range is -20 °C to +70 °C. A -40 °C to +85 °C version is available on request, so state it when ordering.
05What accuracy figures does the manufacturer publish?
Sensitivity is 0.2% of signal range, linearity is 1% of full stroke and hysteresis is 0.5% of full stroke.