- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm LK3122 Electronic Level Sensor, 264 mm Probe, IO-Link
Description
ifm LK3122 overview
The ifm LK3122 is a capacitive electronic level sensor with a 264 mm probe, designed for coolants, oils and water in machine tanks. It has a four-digit display, status LEDs, a switching output, analogue outputs and IO-Link. Ordering description: LK0264B-B-00KLPKG/US.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list this device so that maintenance, procurement and project teams can quote the exact part number against the manufacturer data.
Key features of the LK3122
- Capacitive measuring principle; wetted material PP.
- Active range 195 mm; set point 25 to 200 mm in 5 mm steps.
- Outputs: switching (PNP/NPN), 4 to 20 mA, 0 to 10 V, IO-Link.
- Medium temperature 0 to 35 degrees Celsius, up to 65 with climatic tube E43100.
- Tank pressure 0.5 bar with listed mounting accessories.
LK3122 technical specifications
| Parameter | Value from the manufacturer datasheet |
|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Factory setting | hydrous coolants; water; media similar to water |
| Probe length L [mm] | 264 |
| Special feature | Gold-plated contacts |
| Media | hydrous coolants; oils; oil-based media; water; media similar to water |
| Cannot be used for | extremely conductive media; adhering media; granulates; |
| Tank pressure [bar] | 0.5; (when mounting with mounting accessories: E43001 – E43007, E43019) |
| Medium temperature [°C] | 0…35; (with climatic tube E43100: 35…65 °C) |
| Operating voltage [V] | 18…30 DC |
| Current consumption [mA] | less than 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | less than 3 |
| Measuring principle | capacitive |
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20, invertible |
| Max. load [Ω] | 500 |
| Analogue voltage output [V] | 0…10, invertible |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Active range A [mm] | 195 |
| Inactive range I1 / I2 [mm] | 53 / 16 |
| Set point SP [mm] | 25…200 |
| Reset point rP [mm] | 20…195 |
| In steps of [mm] | 5 |
| Reference point OP [mm] | 69 – 82 – 94 – 106 – 118 – 130 – 143 – 155 – 167 – 179 – 191 – 204 – OFF |
| Hysteresis, OP [mm] | 2 |
| Repeatability | ±2 |
| Resolution [mm] | 5 |
| Zero signal (voltage) [V] | 0 |
| Zero signal (current) [mA] | 4.0 |
| Full signal (voltage) [V] | 10 |
| Full signal (current) [mA] | 20 |
| Parameter setting options | hysteresis / window; normally open / normally closed; switching |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor – SSP 0 Generic Profiled Sensor |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
All values above are taken from the manufacturer datasheet for the LK3122. Ranges are written with three dots, for example 18…30 means 18 to 30. Where a limit depends on the medium or the installation, the datasheet condition applies.
Typical applications in oil and gas, utilities, water and manufacturing
Typical uses are machine-tool coolant tanks, hydraulic and lube oil reservoirs and workshop equipment in manufacturing plants in Oman and the GCC.
In Oman and the wider GCC, level measurement devices like the LK3122 are found in tank inventory, overfill and dry-run protection. Hot ambient conditions, dust and long cable runs make a sensor with clear local indication and stable outputs valuable, because it shortens fault finding for the shift technician. Check the ambient and medium temperature limits in the table above against the actual site conditions before selecting the device.
Selection and compatibility notes for the LK3122
Not for extremely conductive media, adhering media or granulates. Choose the LK3122 where coolant level needs a continuous signal. The LK1022 already on our catalogue is a related model.
When you match this device to an existing loop, compare the supply voltage, output type, connector and process connection with the installed device, and confirm that the control system input accepts the signal. Because the part number identifies one exact version in the family, a similar-looking sibling can differ in output polarity, range or thread, and it is better to quote the exact designation than a family name.
Installation and commissioning
Mount the probe vertically, clear of tank walls, inlet streams and internal fittings, in the position given on the dimension drawing. Make sure the process connection thread and seal are compatible with the tank flange or adapter. Teach the empty and full levels or set the scaling through the display or IO-Link, and record the settings.
Before power-up, check the wiring against the connection diagram in the datasheet, and after power-up allow any start-up delay listed in the table to elapse before judging the output. Document the settings made on site together with the serial number so that a replacement can be configured identically.
Maintenance and service
Inspect the probe for build-up, foam residue or damaged insulation at the intervals the medium requires, and check the seal at the process connection. Re-verify the signal against a dip stick or sight glass reading during shutdown.
Related products and ordering notes
Related ifm devices already listed in the Seven Star catalogue can be found through the brand page. When you request this device, please state the quantity, the required delivery location and whether a datasheet copy is needed. If the application is critical, tell us the process medium, pressure and temperature so the engineer can check the data before the quotation is prepared.
Frequently asked questions
- What is the ifm LK3122? The ifm LK3122 is a capacitive electronic level sensor, 264 mm probe. The ifm LK3122 is a capacitive electronic level sensor with a 264 mm probe, designed for coolants, oils and water in machine tanks.
- What supply and protection rating does the LK3122 have? According to the manufacturer datasheet the LK3122 operates from 18…30 DC and has protection III.
- Is the LK3122 still available from the manufacturer? The manufacturer datasheet does not carry a phase-out or archive notice, but availability changes over time, so ask us to confirm stock and lead time when you send the RFQ.
- Does Seven Star LLC supply the LK3122 in Oman? Yes, Seven Star LLC quotes the LK3122 for projects and maintenance in Oman and the GCC. Send the part number LK3122 and the quantity and we will respond with availability.
- How do I get a quotation for the LK3122? Use the RFQ form on this page with the part number LK3122, the quantity and your delivery location. We will reply with a quotation after checking availability.
Documents and quotation
The manufacturer datasheet is attached to this page where the file is available, and it is the reference for every value shown here. To order, send the RFQ with part number LK3122 and the quantity required, together with the delivery location and any application details. Our team will confirm availability and respond with a quotation.
Datasheets & Documents
- Datasheet ifm LK3122 Electronic Level Sensor, 264 mm Probe, IO-Link Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm LK3122 Electronic Level Sensor, 264 mm Probe,
Answers from our engineering team on installation, compatibility and integration.
01What is the ifm LK3122?
The ifm LK3122 is a capacitive electronic level sensor, 264 mm probe. The ifm LK3122 is a capacitive electronic level sensor with a 264 mm probe, designed for coolants, oils and water in machine tanks.
02What supply and protection rating does the LK3122 have?
According to the manufacturer datasheet the LK3122 operates from 18...30 DC and has protection III.
03Is the LK3122 still available from the manufacturer?
The manufacturer datasheet does not carry a phase-out or archive notice, but availability changes over time, so ask us to confirm stock and lead time when you send the RFQ.
04Does Seven Star LLC supply the LK3122 in Oman?
Yes, Seven Star LLC quotes the LK3122 for projects and maintenance in Oman and the GCC. Send the part number LK3122 and the quantity and we will respond with availability.
05How do I get a quotation for the LK3122?
Use the RFQ form on this page with the part number LK3122, the quantity and your delivery location. We will reply with a quotation after checking availability.


















Reviews
There are no reviews yet.