- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8036775 EXT Cable for MC2 / MC4 to EXT Modules
Description
Beamex 8036775 EXT cable for MC2 and MC4 overview
The Beamex 8036775 is the EXT cable for connecting an external pressure module EXT to MC2 or MC4 family calibrators. According to Beamex it also works between an EXT-IS module and an MC2-IS.
MC2 and MC4 calibrators remain in service at many plants, so this cable is a typical spare for teams that maintain these units.
This page describes Beamex 8036775 for buyers who need the exact order code. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Key features of the EXT cable for MC2 and MC4
- Connects EXT external pressure modules to MC2 and MC4 family calibrators
- Also works between EXT-IS and MC2-IS
- Dedicated cable for the MC2 and MC4 generation
Standard delivery and contents according to Beamex:
- EXT cable for MC2 and MC4
Technical specifications of Beamex 8036775
| Order code | 8036775 |
|---|---|
| Connects | EXT external pressure module |
| Calibrators | MC2 / MC4 family |
| Intrinsically safe use | Also between EXT-IS and MC2-IS |
All values are taken from Beamex documentation. Items not shown here are not stated in the manufacturer source and are therefore left out.
Typical applications in Oman and the GCC
Cables and adapters are among the first accessories to wear or go missing in a busy calibration workshop. Teams that maintain Beamex calibrators and external modules in oil and gas, power, water and industrial plants across Oman and the GCC therefore stock spares such as the EXT cable for MC2 and MC4 (8036775).
Because several generations of calibrators exist, buyers often need an exact order code to be sure the connector pinout and type are right.
Selection and compatibility notes for 8036775
Confirm the calibrator family and the accessory it must connect before ordering. 8036775 is intended only for the equipment named on this page, and similar-looking cables for other generations are not interchangeable.
Read any compatibility notes from Beamex carefully. If your unit is older, check the connector type before choosing the cable.
Installation and commissioning
Switch the calibrator off, connect both ends firmly and make sure the connectors are fully seated. Route the cable so that it does not pull on the connector when the equipment is moved.
Power on and check that the connected device is recognized. Refer to the calibrator manual for any further steps related to 8036775.
Maintenance and care
Inspect the cable for cuts, kinks and bent pins, and coil it loosely for storage. Do not pull on the cable itself when unplugging; hold the connector body.
Keep a spare cable in the field kit so that a damaged cable does not stop a calibration job.
Related products and ordering notes
Beamex lists these related items, each with its own order code:
- 8066770 EXT cable for MC6 and MC5
- 8036140 battery pack MC2 and MC4
- 8036795 power supply BC05-B for MC2 and MC4
Beamex is a Finnish maker of calibration equipment, and its manuals and product pages are the reference for every figure on this page. Always check the manufacturer’s current documentation before putting any accessory or spare part into service.
Seven Star LLC works with industrial maintenance, procurement and calibration teams, so requests that include the full order code, the quantity and the delivery location can be answered quickly. Order codes are often the only reliable way to separate similar-looking accessories from different product generations.
Plants in the region usually plan calibration work around shutdowns, turnarounds and seasonal maintenance windows. Ordering accessories and spare parts well before the work starts avoids waiting for a missing seal, hose or cable when the plant is already offline, and it is cheaper than expediting a single item at the last minute.
Good calibration practice also depends on traceability. Records of the reference equipment, its certificate, the environmental conditions and the as-found and as-left results are what auditors and clients ask for. Accessories do not replace the calibration of the reference itself, but a worn hose, a leaking seal or a damaged cable can spoil an otherwise good measurement, which is why consumables should be replaced on a schedule rather than only after a failure.
When you compare quotations, make sure the order code is identical. Calibration accessories from the same manufacturer often differ only by thread, length or pressure rating, and a similar-looking item with a different code may not be compatible with your equipment. Keep the code on the purchase order, the goods receipt note and the maintenance record so that the same item can be reordered later.
Frequently asked questions about 8036775
What is 8036775 used for? Connecting an EXT external pressure module to an MC2 or MC4 family calibrator.
Does it work in intrinsically safe setups? Beamex states it also works between an EXT-IS module and an MC2-IS.
Can I use it with an MC6? No. For MC6 and MC5 families Beamex lists cable 8066770.
Are other MC2 and MC4 spares available? Beamex lists battery pack 8036140, power supply BC05-B 8036795 and a USB cable 8036700, among others.
Does Seven Star carry old Beamex spares? Send the exact part number and quantity with your RFQ and we will check availability for you.
Documents and quotation
The official Beamex EXT external pressure modules brochure is attached to this page as a PDF. It describes the EXT external pressure modules and their cable connection to Beamex MC calibrators such as the MC2 and MC4. Quote order code 8036775 in your request and we will confirm compatibility with your unit in a written quotation.
Quote Beamex 8036775 exactly as written when you contact us, so that the correct item is quoted the first time. Delivery to Oman and to other GCC countries is arranged for each order, and any questions about packaging, documentation or alternative items can be raised in the same message.
Datasheets & Documents
- Datasheet Beamex EXT Pressure Modules Brochure (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8036775 EXT Cable for MC2 / MC4 to EXT
Answers from our engineering team on installation, compatibility and integration.
01What is 8036775 used for?
Connecting an EXT external pressure module to an MC2 or MC4 family calibrator.
02Does it work in intrinsically safe setups?
Beamex states it also works between an EXT-IS module and an MC2-IS.
03Can I use it with an MC6?
No. For MC6 and MC5 families Beamex lists cable 8066770.
04Are other MC2 and MC4 spares available?
Beamex lists battery pack 8036140, power supply BC05-B 8036795 and a USB cable 8036700, among others.
05Does Seven Star carry old Beamex spares?
Send the exact part number and quantity with your RFQ and we will check availability for you.


















Reviews
There are no reviews yet.