Brand:

Beamex 8003355 Hard Case for ePG and MC6

Description

Beamex 8003355 hard case for ePG and MC6 overview

The Beamex 8003355 is a hard plastic carrying case for the ePG pump and the MC6 calibrator. It is designed so that both products can be used directly from the case without detaching cables or hoses.

The foam has spaces for ePG, MC6, the pressure T-hose and more, and cut-outs below the devices hold the chargers. Beamex notes that the case is not suitable for hazardous areas.

This page describes Beamex 8003355 for buyers who need the exact order code. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the hard case for ePG and MC6

  • Use ePG and MC6 straight from the case without unplugging cables or hoses
  • Foam with spaces for ePG, MC6, pressure T-hose and accessories
  • Cut-outs for chargers below the devices
  • Shoulder strap for carrying
  • Not suitable for hazardous areas

Standard delivery and contents according to Beamex:

  • Hard case with foam inserts
  • Shoulder strap

Technical specifications of Beamex 8003355

Order code 8003355
Dimensions 510 x 420 x 215 mm (W x H x D)
Weight empty 5.1 kg
Weight packed approx. 9 kg with ePG, MC6, cables and chargers
Carrying Shoulder strap
Area classification Not suitable for hazardous areas

All values are taken from Beamex documentation. Items not shown here are not stated in the manufacturer source and are therefore left out.

Typical applications in Oman and the GCC

Calibration equipment is often moved between the workshop and field sites, in vehicles and sometimes by air. Protective cases such as the hard case for ePG and MC6 (8003355) help instrument teams in Oman and the GCC transport their equipment to refineries, gas plants, power stations, water facilities and factories without damage.

A purpose-made case also keeps accessories together, which saves time at the start of each calibration job.

Selection and compatibility notes for 8003355

Choose the case according to the equipment it must carry. 8003355 is designed for the products named on this page, so check that your device model matches before ordering.

Consider the carrying method and the weight when packed. Where the equipment is used in hazardous areas, read the manufacturer notes carefully, because some cases are not suitable for such areas.

Installation and commissioning

Place each device in its foam cut-out, route cables and hoses as shown and close the latches fully before moving the case. Keep chargers and small accessories in their allocated spaces.

Where the case is used for service returns, pack the equipment as the manufacturer instructs. Details for 8003355 are on the Beamex product page.

Maintenance and care

Wipe the case with a damp cloth, keep the latches and hinges clean and replace damaged foam if equipment starts to move inside.

Do not leave the case in direct sun inside a vehicle, because high temperatures can damage the electronics stored inside.

Related products and ordering notes

Beamex lists these related items, each with its own order code:

  • 8003360 hard case for ePG
  • 8081930 hard case for MC6 and RPRT
  • 9021115 ePG complete kit
  • 9270000 MC6 advanced field calibrator

Beamex is a Finnish maker of calibration equipment, and its manuals and product pages are the reference for every figure on this page. Always check the manufacturer’s current documentation before putting any accessory or spare part into service.

Seven Star LLC works with industrial maintenance, procurement and calibration teams, so requests that include the full order code, the quantity and the delivery location can be answered quickly. Order codes are often the only reliable way to separate similar-looking accessories from different product generations.

Plants in the region usually plan calibration work around shutdowns, turnarounds and seasonal maintenance windows. Ordering accessories and spare parts well before the work starts avoids waiting for a missing seal, hose or cable when the plant is already offline, and it is cheaper than expediting a single item at the last minute.

Good calibration practice also depends on traceability. Records of the reference equipment, its certificate, the environmental conditions and the as-found and as-left results are what auditors and clients ask for. Accessories do not replace the calibration of the reference itself, but a worn hose, a leaking seal or a damaged cable can spoil an otherwise good measurement, which is why consumables should be replaced on a schedule rather than only after a failure.

When you compare quotations, make sure the order code is identical. Calibration accessories from the same manufacturer often differ only by thread, length or pressure rating, and a similar-looking item with a different code may not be compatible with your equipment. Keep the code on the purchase order, the goods receipt note and the maintenance record so that the same item can be reordered later.

Frequently asked questions about 8003355

What fits in the 8003355 case? An ePG pump, an MC6 calibrator, pressure T-hose, cables and chargers, according to Beamex.

How big is it? 510 x 420 x 215 mm (W x H x D), and it weighs 5.1 kg empty and about 9 kg when packed.

Can I use the equipment without unpacking it? Yes. The case is designed so ePG and MC6 can be used directly from it with cables and hoses attached.

Can it be used in a hazardous area? No. Beamex states the case is not suitable for hazardous areas.

Is there a case only for the ePG? Yes. Beamex lists hard case 8003360 for the ePG alone.

Documents and quotation

The official Beamex ePG electric pressure pump brochure is attached to this page as a PDF. Its accessories section on page 3 shows the hard carrying case for the ePG pump and calibrator kit. Share order code 8003355 together with your calibrator model and we will confirm the exact part in a written quotation.

Quote Beamex 8003355 exactly as written when you contact us, so that the correct item is quoted the first time. Delivery to Oman and to other GCC countries is arranged for each order, and any questions about packaging, documentation or alternative items can be raised in the same message.

Datasheets & Documents
  • PDF Datasheet Beamex ePG Brochure (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 8003355 Hard Case for ePG and MC6

Answers from our engineering team on installation, compatibility and integration.

01What fits in the 8003355 case?
An ePG pump, an MC6 calibrator, pressure T-hose, cables and chargers, according to Beamex.
02How big is it?
510 x 420 x 215 mm (W x H x D), and it weighs 5.1 kg empty and about 9 kg when packed.
03Can I use the equipment without unpacking it?
Yes. The case is designed so ePG and MC6 can be used directly from it with cables and hoses attached.
04Can it be used in a hazardous area?
No. Beamex states the case is not suitable for hazardous areas.
05Is there a case only for the ePG?
Yes. Beamex lists hard case 8003360 for the ePG alone.