- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8081785 Battery Pack for MC6 and MC6-WS, Li-ion
Description
Overview of Beamex MC6 Li-ion battery pack Beamex 8081785
The Beamex 8081785 is a rechargeable lithium-ion battery pack, type 175-8013, for the MC6 and MC6-WS calibrators. Its capacity is 4300 mAh at 11.1 V, and it is the same pack that is installed in a new MC6 as standard equipment.
A fresh pack restores the 10 to 16 hour operating time quoted for the MC6 and avoids unplanned stops during long field jobs.
This page describes Beamex MC6 Li-ion battery pack for buyers who need the exact part number Beamex 8081785. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.
Key features of 8081785
- Order code: 8081785.
- Battery chemistry: Rechargeable lithium-ion.
- Pack type: 175-8013.
- Capacity: 4300 mAh.
- Voltage: 11.1 V.
- Fits: MC6 and MC6-WS calibrators.
- Typical operation time in MC6: 10 to 16 hours.
Technical specifications for 8081785
| Order code | 8081785 |
|---|---|
| Battery chemistry | Rechargeable lithium-ion |
| Pack type | 175-8013 |
| Capacity | 4300 mAh |
| Voltage | 11.1 V |
| Fits | MC6 and MC6-WS calibrators |
| Typical operation time in MC6 | 10 to 16 hours |
| Charging time in MC6 | Approximately 4 hours |
All values above come from the manufacturer documentation and may change with later revisions. Please quote 8081785 when you need the matching datasheet or a confirmation of the current revision.
Typical applications in Oman and the GCC
Battery packs are the part of a portable calibrator that ages first. Plants in Oman and the GCC that run calibrators daily for turnarounds, shutdown checks and routine rounds see capacity fall after repeated charge cycles, and a fresh pack restores full working time between charges.
Maintenance contractors working on oil and gas sites, utilities, desalination and manufacturing lines keep spare packs in the kit so that a flat battery never stops a loop check or a documentation run.
The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.
Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.
Selection and compatibility notes for 8081785
The manufacturer states that this lithium-ion battery replaces the earlier lithium polymer battery type 175-8011 (code 8081780) and is compatible with all MC6 and MC6-WS units. Replacement steps are given in the calibrator user manual.
Do not use this pack in the MC6-Ex, which has its own certified NiMH pack (8075644).
Before ordering 8081785, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.
If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8081785 before it is supplied.
Installation and commissioning of 8081785
Switch the calibrator off and disconnect the charger and all test leads before opening the battery compartment. Follow the replacement procedure in the calibrator user manual, keep the connector orientation exactly as found, and refit the cover before switching on. After fitting 8081785, charge the pack fully with the matching charger before relying on it in the field.
Reset the date and time if the calibrator asks for it, and confirm that the battery indicator reads correctly. Dispose of the old pack through a battery recycling channel in line with local regulations.
Maintenance and care
Store spare battery packs partly charged in a cool, dry place and charge them before use. Avoid leaving a pack discharged for a long time, and do not charge outside the temperature limits given in the calibrator specification. Replace the pack when operating time becomes noticeably shorter than expected.
Use only the matching charger listed for the calibrator, and keep the contacts clean. Record the installation date of 8081785 so that replacement can be planned.
Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.
Related products and ordering notes for 8081785
Related items include the matching power supply and power cord, a protective case and spare test leads. The calibrator brochure and the manufacturer webshop list each accessory by part number.
Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.
Please note that Seven Star LLC prepares each quotation for 8081785 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.
The part number 8081785 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.
Frequently asked questions about 8081785
- Which calibrators use 8081785? It is compatible with all MC6 and MC6-WS units according to the manufacturer.
- Does it replace an older battery? Yes. It replaces the earlier lithium polymer pack type 175-8011, code 8081780.
- What is the capacity? 4300 mAh at 11.1 V, according to the manufacturer documentation for 8081785.
- Can it be used in the MC6-Ex? No. The MC6-Ex uses a separate intrinsically safe NiMH battery pack, 8075644.
- Where do I find replacement instructions? In the MC6 user manual published by the manufacturer.
Documents and quotation
The official Beamex MC6 User Manual is attached to this page as a PDF. Its battery and charging sections explain how the Li-ion battery pack is fitted, charged with the BC15 power supply and checked from the MC6 status bar. Send us the order code 8081785 and the serial number of your instrument and we will confirm fit and lead time in a written quotation.
Datasheets & Documents
- Datasheet Beamex MC6 User Manual (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8081785 Battery Pack for MC6 and MC6-WS,
Answers from our engineering team on installation, compatibility and integration.
01Which calibrators use 8081785?
It is compatible with all MC6 and MC6-WS units according to the manufacturer.
02Does it replace an older battery?
Yes. It replaces the earlier lithium polymer pack type 175-8011, code 8081780.
03What is the capacity?
4300 mAh at 11.1 V, according to the manufacturer documentation for 8081785.
04Can it be used in the MC6-Ex?
No. The MC6-Ex uses a separate intrinsically safe NiMH battery pack, 8075644.
05Where do I find replacement instructions?
In the MC6 user manual published by the manufacturer.


















Reviews
There are no reviews yet.