Brand:

Moog G761-3005B Servo Valve, 63 l/min, ISO 10372 Size 04

Description

Moog G761-3005B servo valve overview

The Moog G761-3005B is a preferred-model valve from the Moog 761 Series, a family of two-stage flow control servo valves with an analog current interface. It is a throttle valve for three-way and preferably four-way hydraulic circuits and it is rated at 63 l/min (16.5 gpm) for a 35 bar pressure drop across each spool land. The G761-3005B is aimed at electrohydraulic position, speed, pressure and force loops where the actuator has to follow a command quickly and repeatably.

Inside the G761-3005B, a symmetrical nozzle-flapper torque motor forms the pilot stage and a four-land sliding spool, ground to a bushing, forms the output stage. A feedback wire with a carbide ball reports spool position back to the torque motor, so the spool settles where the feedback force balances the command current. This mechanical feedback principle is why a G761-3005B behaves predictably across a wide range of operating conditions.

The type designation S63JOGM4VPL tells an engineer exactly how the valve is built. The leading letter S is the standard response version, the number 63 is the rated flow code, J means an aluminium body for 315 bar, O is the axis-cut zero-lap four-way spool, G is the high-dynamics pilot stage, M is the center spool position without a signal, 4 selects internal pilot supply, V is an FKM seal, P places the four-pin connector over the P side and L is the plus or minus 40 mA coil code.

Key features of the Moog G761-3005B

  • Two-stage design with a dry torque motor, so the air gaps of the motor stay free of oil; the G761-3005B keeps hydraulic and electrical sections separate by a flexure tube.
  • Dual coil torque motor: the four leads are brought to the connector so the coils can be wired single, in series or in parallel for redundancy or for a different drive current.
  • Rated flow of 63 l/min at 35 bar per spool land with a flow tolerance of plus or minus 10 percent, quoted for the standard configuration.
  • ISO 10372-04-04-0-92 mounting pattern, so the valve fits standard manifolds and sub-plates of that size.
  • Field-configurable fifth port X for a separate pilot supply, together with a pilot stage filter that can be reached from the outside.
  • Typical static data of 0.5 percent or less threshold and 3.0 percent or less hysteresis, with null shift of 2.0 percent or less over a 55 degC temperature change.
  • Every valve is tested at the factory before shipment, according to the maker’s catalog.

G761-3005B technical specifications

Part number (model) G761-3005B
Type designation S63JOGM4VPL
Series Moog 761 Series flow control servo valve
Valve design Two-stage, mechanical feedback, bushing and spool, dry torque motor
Pilot stage Nozzle flapper, high dynamics (G)
Response class Standard response
Rated flow at 35 bar per spool land 63 l/min (16.5 gpm)
Maximum flow 104 l/min (27.5 gpm), series limit
Spool design 4-way, axis cut, zero lap
Body and pressure rating Aluminium, 315 bar (4,500 psi) at ports P, X, A and B
Return port T Static: same as P port; normal operating 70 bar (1,000 psi)
Minimum operating pressure 14 bar (200 psi)
Pilot supply Internal supply through port P
Spool position without signal Center position
Seal material FKM (fluorocarbon)
Rated current Plus or minus 40 mA single coil (20 mA series), 80 ohm per coil at 25 degC
Connector 4-pin MS threaded connector over the P side
Mounting pattern ISO 10372-04-04-0-92
Maximum total leakage, axis cut 3.3 l/min (0.87 gpm)
Frequency response, minus 3 dB 80 Hz
Frequency at 90 degree phase lag 125 Hz
Step response 0 to 100 percent stroke 7 ms
Hysteresis, typical 3.0 percent or less
Threshold, typical 0.5 percent or less
Null shift per 55 degC change 2.0 percent or less
Weight, aluminium body 1.0 kg (2.2 lb)
Ambient temperature Minus 29 to plus 135 degC
Vibration and shock 30 g, 3 axes (vibration 10 Hz to 2 kHz)

All figures above for the G761-3005B are taken from the manufacturer’s 761 Series catalog; hydraulic values are measured at 210 bar (3,000 psi) pilot or operating pressure, 32 mm2/s oil viscosity and 40 degC oil temperature. Flow at other pressure drops follows the square-root relation described in the catalog.

Typical applications in oil and gas, utilities, water and manufacturing

Servo valves of this kind sit between the control system and a hydraulic cylinder or motor. In Oman and across the GCC the G761-3005B class of valve is relevant wherever a hydraulic axis must be positioned accurately: hydraulic actuators on turbine and compressor control systems in oil, gas and power plants, hydraulic test rigs in workshops, presses and forming equipment in manufacturing, and gate or valve positioners in utilities and water infrastructure that run on hydraulic power units.

Because the G761-3005B is a small ISO size 04 valve with 63 l/min rated flow, it is usually found on a single cylinder or a small group of actuators rather than on a main drive. Many sites hold these valves as critical spares, since a failed servo valve can stop the axis it controls. Engineers often search for the exact model number such as G761-3005B when an older machine lists it on the nameplate or in the spare-parts book.

Selection and compatibility notes for G761-3005B

Start from the rated flow. For the G761-3005B the figure is 63 l/min at 35 bar per land; the real flow at your own pressure drop will be higher or lower and should be calculated from the catalog formula before the valve is confirmed. Check that the cylinder speed demanded at the actual supply pressure stays below the maximum flow of 104 l/min for the 761 range and that your supply does not exceed the valve rating of 315 bar for an aluminium body.

Confirm the command signal. The G761-3005B is built for a plus or minus 40 mA single-coil rating (plus or minus 20 mA with the coils in series). If your servo amplifier delivers a different current range, say so when you request a quotation, because the coil code is part of the type designation. Check also the connector position over the P side, the internal pilot supply and the FKM seal against your hydraulic fluid. The catalog lists mineral oils to DIN 51524 parts 1 to 3 and ISO 11158; other fluids need confirmation from the maker.

Intrinsically safe and explosion proof variants of the 761 family exist under separate model numbers, so the G761-3005B should not be assumed to carry any hazardous-area certificate. If your site needs a certified valve, state the zone and certificate requirement in the RFQ.

Installation and commissioning of the G761-3005B

The G761-3005B can be installed in any position, fixed or movable. Machine the mounting surface to the ISO 10372 pattern, with port bores of 8.2 mm for P, T, A and B and 5.0 mm for X if full flow is wanted, and use socket head screws of grade 10.9 or better; the catalog recommends M8 by 45 mm. Fit the base o-rings, remove shipping covers only at the last moment and flush the system before the valve is connected.

For electrical hook-up, the standard four-pin connector mates with an MS3106F14S-2S style plug. Wire the coils so that positive current opens P to B and A to T, using the single, series or parallel scheme shown in the catalog. Drive the valve from a current-feedback amplifier with high output impedance so that changes in coil resistance with temperature do not disturb the loop. Set the spool null from the controller during commissioning and check for leakage at zero command.

Maintenance and fluid cleanliness

Contamination is the main enemy of any servo valve. For the G761-3005B the catalog recommends an ISO 4406 cleanliness level of 17/14/11 for functional safety and 15/13/10 for longer service life, a 10 micron absolute high-pressure filter without bypass just ahead of the valve, and a 5 micron filter in the return line. Keep the tank breather at least as fine as the finest filter in the circuit.

Spare parts listed by the maker for the 761 range include maintenance kits with base o-rings in FKM to AMS7259: part number B52555RK201K001 with a 63 micron filter disk and B52555RK204K001 with a 28 micron filter disk. Replace the o-rings and the pilot filter whenever the valve is removed, and record the null and leakage readings so that gradual wear can be seen over time.

Related products and ordering notes for G761-3005B

Other preferred models of the same 761 range are G761-3001B (4 l/min), G761-3002B (10 l/min), G761-3003B (19 l/min), G761-3004B (38 l/min) and G761-3005B (63 l/min). Companion items include an analog servo amplifier such as the IN122-829A series and a buffer amplifier such as IN123-825-001 when a PLC output must drive the coil. A valve checker is useful for separating hydraulic faults from electronic ones.

When you request the G761-3005B, please state the quantity, the delivery location in Oman or the GCC, the nameplate of the valve being replaced if any, and the coil current and fluid in use. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.

Frequently asked questions in short

The G761-3005B is a 63 l/min, standard response, 315 bar aluminium-body servo valve with a nozzle-flapper pilot. It uses a plus or minus 40 mA coil, an FKM seal and a four-pin connector over the P side. It is a mechanical feedback valve, so it needs an analog current drive and not a fieldbus link. See the questions below for flow, connector and spares.

Documents and quotation

The manufacturer’s 761 Series datasheet is attached to this page as a PDF so that you can verify the G761-3005B data. To obtain a quotation, send the RFQ with the part number G761-3005B and the quantity required; Seven Star LLC will reply with availability and lead time for delivery to Oman and the GCC.

Other Models in the 761 Range

Seven Star LLC supplies models from the 761 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Moog G761-3001B Servo Valve, 4 l/min, ISO 10372 Size 04Solenoid ValvesView details
Moog G761-3002B Servo Valve, 10 l/min, ISO 10372 Size 04Solenoid ValvesView details
Moog G761-3003B Servo Valve, 19 l/min, ISO 10372 Size 04Solenoid ValvesView details
Moog G761-3004B Servo Valve, 38 l/min, ISO 10372 Size 04Solenoid ValvesView details
Moog G761-3005B Servo Valve, 63 l/min, ISO 10372 Size 04Solenoid ValvesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Moog G761-3005B Servo Valve Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.

Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.

MOOG company profile

Founded July 1951, East Aurora, New York, as Moog Valve Company
Founders Bill Moog, Art Moog and Lou Geyer
Headquarters East Aurora, New York, USA
Ownership Public company, New York Stock Exchange
Product families Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems

Milestones

  • 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
  • 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
  • 1959: The company goes public as Moog Servocontrols Inc.

Moog servo valves and motors listed

The Moog products on this page are:

  • G761 series: two-stage flow control servo valve with mechanical feedback
  • 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
  • Servo valves and servo-proportional valves for hydraulic control in general
  • G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series

Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.

Where Moog servo valves are used

Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.

MOOG products we list

Family Examples
Hydraulic Valves & Components 72 Series Two-Stage Flow Control Servo V…, 79 Series Flow Control Servo Valve, D634 Direct Drive Servo Valve, D638 Digital p/Q Control Servo Valve, D661 Pilot-Operated Servo Valve, D671 to D675 Pilot-Operated Servo-Propor…, D791 Pilot-Operated Servo Valve, D792 High-Flow Servo Valve and 5 more
Electric Motors G-3LM6-048-00-00-01 Brushless Servo Motor

Ordering Moog parts: what we need

The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.

Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.

Facts checked against published Moog company histories, October 2026.

FAQ

Questions about the Moog G761-3005B Servo Valve, 63 l/min, ISO 10372

Answers from our engineering team on installation, compatibility and integration.

01What does the type designation S63JOGM4VPL mean?
It is the factory type code of the G761-3005B: S for standard response, 63 for the rated flow code, J for an aluminium body at 315 bar, O for axis-cut zero-lap spool, G for the high-dynamics pilot, M for center position, 4 for internal pilot, V for FKM seals, P for the connector position and L for the 40 mA coil.
02What is the rated flow of the G761-3005B?
The catalog gives 63 l/min (16.5 gpm) at a 35 bar pressure drop per spool land, with a flow tolerance of plus or minus 10 percent. Actual flow at other pressure drops should be calculated with the square-root relation in the catalog.
03Which mounting pattern does the G761-3005B use?
The mounting pattern is ISO 10372-04-04-0-92. Mounting screws recommended by the maker are socket head screws, M8 by 45 mm, grade 10.9 minimum, and the ports are best machined at 8.2 mm for P, T, A and B.
04Which spare maintenance kits are listed for the G761-3005B?
The catalog lists B52555RK201K001 (base o-rings in FKM with a 63 micron filter disk) and B52555RK204K001 (base o-rings in FKM with a 28 micron filter disk). Confirm the kit and seal material against your application.
05How do I request a quotation for the G761-3005B?
Send an RFQ with the part number G761-3005B, the quantity and the delivery location. Seven Star LLC replies with availability and lead time; this page shows no commercial terms.