- Automation & ControlView all 2,649 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: KRACHT
KRACHT PT 200-A-063-100 Bellhousing for KF Gear Pump
Description
KRACHT PT 200-A-063-100 bellhousing for KF gear pumps: overview
The KRACHT PT 200-A-063-100 is a rigid bellhousing from the KRACHT accessory programme for the KF low-pressure gear pump series. Its job is simple but important: it carries a KF pump on the flange of a standard IEC electric motor, keeps the pump shaft and the motor shaft on one centreline, and encloses the flexible coupling that sits between them. In the KF catalog the KRACHT PT 200-A-063-100 is listed for pump nominal sizes 2.5 to 25 together with IEC motor frame 80 M, 90 S/L, so it is a dedicated spare and retrofit item rather than a general-purpose adapter.
Buyers usually look for this exact designation when a motor has been replaced, when a pump skid is rebuilt, or when an older pump unit has lost its adapter. Because KRACHT builds the designation from the geometry, the PT 200-A-063-100 tells you almost everything you need to check before an enquiry: the outer diameter on the motor side, the rigid design, the centring diameter on the pump side and the overall length.
How to read the PT 200-A-063-100 designation
- PT is the short description for bellhousing.
- 200 is the outer diameter on the motor side in millimetres.
- A means rigid design.
- 063 is the centring diameter on the pump side (63.0 mm in the dimension table).
- 100 is the total length of the bellhousing in millimetres.
Reading the code this way lets a maintenance planner compare the PT 200-A-063-100 with the nameplate data of an existing pump and motor before any part is ordered. If the centring diameter or the motor flange does not match, a different bellhousing from the same table is needed.
Key features of the PT 200-A-063-100
- Rigid design (type letter A) for a fixed, vibration-resistant pump-to-motor connection.
- Matched to KF gear pump nominal sizes 2.5 to 25.
- Dimensioned for IEC motor frame 80 M, 90 S/L according to the KF catalog table.
- Centring diameter 63.0 mm on the pump side and outer diameter 200 mm on the motor side.
- All diameters, the length and the bolt threads are published for every code, so fit can be checked on paper.
The open bell form gives access to the coupling for alignment checks and for replacement of the elastic element, which is one reason a bellhousing arrangement is common on compact gear pump units. The PT 200-A-063-100 follows the same table logic as the other PT codes, which makes it easy to swap between sizes during a unit rebuild.
Technical specifications for the PT 200-A-063-100
| Parameter | Value |
|---|---|
| Designation | PT 200-A-063-100 |
| Product type | Rigid bellhousing for KF gear pumps |
| Suitable KF nominal sizes | 2.5 to 25 |
| IEC motor frame sizes | 80 M, 90 S/L |
| A | 200 mm |
| B | 130 mm |
| C | 165 mm |
| D | 145 mm |
| E (centring on pump side) | 63.0 mm |
| F | 7 mm |
| G | 85.0 mm |
| K | 11 mm |
| L (total length) | 100 mm |
| M | M8 |
| N | 16 mm |
| P | M10 |
All dimensions are quoted from the KF 2.5 to 3150 catalog table for accessories and are in millimetres; letters follow the dimension drawing printed beside the table. Material and surface finish are not stated in that table, so they are left out here and should be confirmed in the quotation stage if they matter for your project.
Typical applications in Oman and the GCC
KF gear pumps are used to move a wide range of liquids, and the catalog highlights their low sound level and low pressure pulsation. In the Gulf region that profile fits lubrication and transfer duties in oil and gas facilities, fuel and oil handling at power and desalination plants, water treatment dosing skids and general manufacturing. In all of these, the PT 200-A-063-100 is the mechanical link that lets the pump be driven by a standard foot or flange motor.
Spare-part requests for the PT 200-A-063-100 tend to come from maintenance teams who need to restore a pump unit quickly after motor replacement, and from packagers who build or refurbish pump skids and want the drive-end hardware to match the pump data sheet.
Selection and compatibility notes for the PT 200-A-063-100
- Confirm the KF pump nominal size first; the PT 200-A-063-100 belongs to the 2.5 to 25 group.
- Confirm the IEC motor frame on the motor nameplate against 80 M, 90 S/L.
- Check the pump-side centring diameter of 63.0 mm and the motor flange before ordering.
- Select the matching coupling from the same catalog page; see the related products section below.
- If your pump is a size outside the group, choose another PT code instead of modifying this one.
The KF catalog also notes that the pump speed must be chosen so the pump fills completely, with relative inlet pressure not falling below minus 0.4 bar, and temporarily minus 0.6 bar during a cold start. That is a system-design point, but it is worth remembering when a bellhousing change is combined with a motor of a different speed.
Installation, commissioning and maintenance of the PT 200-A-063-100
Fit the bellhousing to the pump flange first, using the pump-side centring diameter as the locating spigot, then offer the motor to the %s and tighten the motor flange screws evenly. Before the final tightening, install the coupling halves on the pump and motor shafts and check that the shaft ends and the elastic element have the axial gap specified for the coupling in use. Rotate the assembly by hand to confirm free running. After the first start, listen for unusual noise and recheck the screws once the unit has reached operating temperature.
A bellhousing is a static part, so maintenance mainly means inspection: look for cracks or corrosion on the flange, make sure the centring surfaces are clean and undamaged and verify that screws have not loosened from vibration. Inspect the coupling through the bell opening at the same intervals as the pump seals. Keep spare PT 200-A-063-100 hardware with the unit records so that a replacement can be identified from the designation alone.
Related KRACHT products and ordering notes
A complete drive normally combines a KF gear pump, a bellhousing such as the PT 200-A-063-100, a flexible coupling of the RA or RG type and an IEC motor. The coupling table in the KF catalog is arranged by pump nominal size and motor frame, exactly like the bellhousing table, which makes it straightforward to assemble a matching set. When you send an enquiry, give the pump type key, the motor frame size and the quantity so the correct bellhousing and coupling pair can be confirmed together.
Frequently asked questions
The five questions below summarise what most buyers ask about the PT 200-A-063-100 before they order.
- What does the PT 200-A-063-100 fit? The PT 200-A-063-100 is listed in the KF catalog for KF pump nominal sizes 2.5 to 25 combined with IEC motor frame 80 M, 90 S/L.
- What do the numbers in PT 200-A-063-100 mean? PT means bellhousing, 200 is the outer diameter on the motor side, A is the rigid design, 063 is the pump-side centring diameter and 100 is the total length, all in millimetres.
- Is the PT 200-A-063-100 a rigid or flexible bellhousing? It is a rigid design, indicated by the letter A in the type key printed in the KF catalog.
- Do I need a coupling as well as the PT 200-A-063-100? Yes. The bellhousing houses a flexible coupling between pump shaft and motor shaft, and the catalog lists matching RA or RG couplings by pump size and motor frame.
- Where can I get the dimensions of the PT 200-A-063-100? The full dimension row is in the KF 2.5 to 3150 catalog and is repeated in the table on this page; send an RFQ if you want the datasheet attached.
Documents and quotation
The KF 2.5 to 3150 catalog containing the bellhousing and coupling tables is available as a datasheet on this page. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. To request a quotation for the PT 200-A-063-100, send an RFQ with the part number, the pump type key, the motor frame size and the quantity required, and we will confirm availability and lead time.
Datasheets & Documents
- Datasheet KRACHT PT 200-A-063-100 Bellhousing for KF Gear Pump Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.
Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.
KRACHT company profile
| Founded | 1911, registered as Hillebrand & Kracht OHG |
|---|---|
| Headquarters | Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971 |
| Ownership | Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company |
| Size | About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco |
| Subsidiaries | USA, China and Hungary (KRACHT Hidraulik Kft.) |
| Product families | External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders |
Milestones
- 1911: Hillebrand & Kracht OHG is entered in the trade register.
- 1971: The company moves into its present premises in Werdohl.
- 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
- 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.
KRACHT pumps, flow meters and valves listed
The listing follows four product groups, pumps, fluid measurement, valves and drives:
- Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
- Fluid measurement technology: gear type flow meters such as the VCA in aluminum
- Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
- Drive technology: KM hydraulic gear motors
Where KRACHT equipment is used
KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.
KRACHT products we list
Ordering KRACHT parts: what we need
KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.
Frequently requested KRACHT models: KRACHT Pump Technology Series.
Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.
Browse KRACHT products by category: Safety Relief Valves, Pumps, Flowmeters, Electromotors.
FAQ
Questions about the KRACHT PT 200-A-063-100 Bellhousing for KF Gear Pump
Answers from our engineering team on installation, compatibility and integration.
01What does the PT 200-A-063-100 fit?
The PT 200-A-063-100 is listed in the KF catalog for KF pump nominal sizes 2.5 to 25 combined with IEC motor frame 80 M, 90 S/L.
02What do the numbers in PT 200-A-063-100 mean?
PT means bellhousing, 200 is the outer diameter on the motor side, A is the rigid design, 063 is the pump-side centring diameter and 100 is the total length, all in millimetres.
03Is the PT 200-A-063-100 a rigid or flexible bellhousing?
It is a rigid design, indicated by the letter A in the type key printed in the KF catalog.
04Do I need a coupling as well as the PT 200-A-063-100?
Yes. The bellhousing houses a flexible coupling between pump shaft and motor shaft, and the catalog lists matching RA or RG couplings by pump size and motor frame.
05Where can I get the dimensions of the PT 200-A-063-100?
The full dimension row is in the KF 2.5 to 3150 catalog and is repeated in the table on this page; send an RFQ if you want the datasheet attached.


















Reviews
There are no reviews yet.