Schneider Electric XB5AW31G5 White Illuminated Push-Button

Description

XB5AW31G5: white 110–120 V AC illuminated flush Harmony XB5 push-button

The XB5AW31G5 is a Schneider Electric Harmony XB5 illuminated push-button for a 22 mm panel hole. It has a white flush operator under a plain lens, a spring-return action, one NO and one NC contact, an integral universal LED and a rated lamp supply of 110 to 120 V AC at 50/60 Hz. Seven Star LLC supplies the XB5AW31G5 in Oman and the GCC as an independent supplier based in Muscat, normally to panel builders and maintenance buyers who want an operator that also shows state. The datasheet, generated on 8 Nov 2026, carries a notice that this reference was discontinued on 9 Feb 2023, so availability depends on remaining stock and on replacement guidance; ask us before you design it into a new panel.

A reading of the code, offered as our own interpretation and not as the manufacturer’s ordering table: XB5AW3 is the plastic flush illuminated button with 1 NO + 1 NC, the next digit (1) carries the colour, and the closing letter and digit (G5) set the LED supply. The comparison table shows how the 13 references of this lane sit together.

Mounting, wiring and sealing of the XB5AW31G5

The XB5AW31G5 measures 42 mm high, 30 mm wide and 57 mm deep behind the panel face and weighs 0.056 kg. It mounts in a standard 22.5 mm round hole with a clamping thickness of 1 to 6 mm in the dimension drawing. Terminals are screw clamp, tightened to 0.8 to 1.2 N.m, with up to two conductors of 1.5 mm² with cable ends or from 0.22 mm² without ends.

The datasheet lists IP66, IP69, IP69K, IP67, UL type 4X/13 and IK05 impact protection, with operation at -40 to 70 °C. It also gives resistance to a high-pressure washer at 7000000 Pa and 55 °C from 0.1 m. The certifications named for this reference are CSA, LROS (Lloyd’s Register), BV, UL listed, DNV.

Selection checklist and RFQ information for XB5AW31G5

Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.

  • Part number XB5AW31G5 and the required quantity.
  • The lamp supply, here 110 to 120 V AC at 50/60 Hz.
  • The colour (white) and its meaning on your legend.
  • The contact arrangement, here 1 NO + 1 NC.
  • Panel thickness and rear clearance, against the body depth.
  • Any approval needed by the project, compared with the datasheet listing.
  • Delivery location in Oman or the GCC and the lead time you need.

Technical specifications of the XB5AW31G5

Parameter Specification
Manufacturer / part number Schneider Electric / XB5AW31G5
Range Harmony XB5
Product type Illuminated push-button, spring return
Operator profile White flush, unmarked, plain lens
Bezel / fixing collar Dark grey plastic / plastic
Head shape Round
Mounting diameter 22.5 mm
Contacts 1 NO + 1 NC, slow-break
Positive opening Provided (IEC 60947-5-1 appendix K)
Terminal marking (ISO) (13-14)NO, (21-22)NC
Operating travel 1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel)
Operating force 3.5 N NC changing electrical state / 3.8 N
Mechanical durability 10 million cycles
Light source / bulb base Universal LED / Integral LED
Rated supply voltage [Us] 110 to 120 V AC at 50/60 Hz
Supply voltage limits 100–132 V AC
Current consumption 14 mA
LED service life 100000 h at rated voltage and 25 °C
Thermal current [Ith] 10 A
Rated insulation voltage [Ui] 600 V, pollution degree 3
Rated impulse withstand [Uimp] 6 kV
Rated operational current [Ie] 3 A at 240 V, AC-15, A600; 6 A at 120 V, AC-15, A600; 0.1 A at 600 V, DC-13, Q600
Short-circuit protection 10 A gG cartridge fuse
Electrical durability 1 million cycles, AC-15, 2 A at 230 V
Dimensions (H x W x D) 42 mm × 30 mm × 57 mm
Net weight 0.056 kg
Degree of protection IP66, IP69, IP69K, IP67; UL type 4X/13; IK05
Operating / storage temperature -40 to 70 °C / -40 to 70 °C
Vibration / shock 5 gn, 2–500 Hz / 30 gn 18 ms and 50 gn 11 ms
Certifications CSA, LROS (Lloyd’s Register), BV, UL listed, DNV
Warranty 18 months

Typical uses of XB5AW31G5 in Oman and the GCC

Illuminated buttons such as XB5AW31G5 appear on motor starter doors, pump and fan stations, conveyor controls, packaged equipment and building service panels across Oman and the GCC. In oil and gas, petrochemical, power and desalination sites they combine a command with its confirmation, so the operator sees that the action was accepted.

Supply, LED and colour of the XB5AW31G5

The 110–120 V AC rating fits panels with a 110 V control transformer secondary, a pattern common on motor control centres that were specified to American or older British practice. It is an AC lamp circuit, so it is not for DC supplies. The datasheet lists the supply limits as 100–132 V AC and the current consumption as 14 mA, and the stated LED service life is 100000 h at rated voltage and 25 °C. The light source is a universal LED with an integral base, so there is no bulb to change, and the lamp is steady rather than flashing. A note at the head of the datasheet says a change in appearance may be seen on the product without affecting function or safety.

White is the neutral colour of a panel. It normally carries a general status such as control supply present, mode selected or step running, with no good-or-bad meaning attached, so it is often given to the lamp that proves the control circuit is live. The plain lens carries no legend, so the function is usually identified by a nameplate or an engraved label beside the button.

How the XB5AW31G5 operates

Each head returns by spring force after release. The normally closed contact changes state after 1.5 mm of travel, the normally open one after 2.6 mm, and the total stroke is 4.3 mm. The datasheet gives an operating force of 3.5 N at the NC point of change and 3.8 N for the NO contact, and the mechanical life is rated at 10 million cycles. Contact operation is slow-break, which is normal for control-circuit buttons.

Positive opening is listed for this part, meaning a mechanical linkage drives the NC contact open even if it has welded, which is why such contacts are chosen for stop and interlock duties. The terminals are marked 13-14NO, 21-22NC under the ISO numbering.

The XB5AW group and where XB5AW31G5 fits

The lane groups plastic illuminated push-buttons that differ in colour, lamp supply and operator type. Single flush references carry 1 NO + 1 NC and either an LED (24 V AC/DC, 110–120 V AC or 230–240 V AC) or a bulb socket; two double-headed references add a green I and red O station. The XB5AW31G5 is the white flush member with 110–120 V AC.

Reference Colour Lamp supply
XB5AW31G5 White 110–120 V AC
XB5AW31M5 White 230–240 V AC
XB5AW3365 Green Up to 250 V, BA 9s bulb
XB5AW33G5 Green 110–120 V AC
XB5AW33M5 Green 230–240 V AC
XB5AW3465 Red Up to 250 V, BA 9s bulb
XB5AW34B5 Red 24 V AC/DC
XB5AW34G5 Red 110–120 V AC
XB5AW34M5 Red 230–240 V AC
XB5AW35G5 Orange 110–120 V AC
XB5AW36G5 Blue 110–120 V AC
XB5AW73731B5 Green/red double 24 V AC/DC
XB5AW73731M5 Green/red double 230–240 V AC

Documents and quotation

The Schneider Electric datasheet for the XB5AW31G5 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension and panel cut-out drawings.

To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.

Datasheets & Documents
  • PDF Datasheet Schneider Electric XB5AW31G5 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric XB5AW31G5 White Illuminated

Answers from our engineering team on installation, compatibility and integration.

01What contacts does the XB5AW31G5 have?
One normally open and one normally closed contact, slow-break, with positive opening listed on the datasheet.
02What lamp supply does the XB5AW31G5 use?
The datasheet lists 110 to 120 V AC at 50/60 Hz, with limits of 100–132 V AC and a current consumption of 14 mA.
03What panel opening does the XB5AW31G5 need?
A round 22.5 mm hole, with a clamping thickness of 1 to 6 mm according to the datasheet drawing. Terminals are screw clamp type.
04How long is the mechanical life of the XB5AW31G5?
10 million cycles, per the datasheet. Electrical life is 1 million cycles at the stated AC-15 loads.
05Does Seven Star LLC supply the XB5AW31G5 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.