- Automation & ControlView all 1,864 products
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- HMI Displays
- Industrial Computers
- Servo Drives
- Motor Soft Starters
- Pneumatic Cylinders
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric BMXAMM0600 Modicon X80 Mixed Analog I/O
Description
BMXAMM0600 mixed analog module, 4 inputs and 2 outputs
The BMXAMM0600 is a Schneider Electric product listed in the datasheet as: Analog high level IO module, Modicon X80, 4 I, 2 O, 0 to 20mA, 4 to 20mA, 10V positive or negative. The BMXAMM0600 is a Modicon X80 analogue module with four inputs and two outputs for 0 to 20 mA, 4 to 20 mA and plus or minus 10 V signals. The combination suits small loops with positioners and transmitters. Seven Star LLC supplies the BMXAMM0600 in Oman and the GCC as an independent supplier based in Muscat.
Reading the reference: BMX is the X80 platform, AMM the analogue mixed module and 0600 the variant with 4 inputs and 2 outputs.
Technical specifications of the BMXAMM0600
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / BMXAMM0600 |
| Description | Analog high level IO module, Modicon X80, 4 I, 2 O, 0 to 20mA, 4 to 20mA, 10V positive or negative |
| Range of Product | Modicon X80 |
| Product or Component Type | Mixed analog I/O module |
| Electrical connection | 20 ways 1 connector |
| Isolation between channels | Non isolated |
| Input level | High level |
| Analogue input number | 4 |
| Analogue input type | Current 0 to 20 mA; Current 4 to 20 mA; Voltage ± 10 V; Voltage 0 to 10 V; Voltage 0 to 5 V; Voltage 1 to 5 V |
| Analogue input resolution | 12 bits 0 to 20 mA; 12 bits 0 to 5 V; 12 bits 1 to 5 V; 12 bits 4 to 20 mA; 13 bits 0 to 10 V; 14 bits ± 10 V |
| Permitted overload on inputs | ± 30 mA 0 to 20 mA; ± 30 mA 4 to 20 mA; ± 30 V ± 10 V; ± 30 V 0 to 10 V; ± 30 V 0 to 5 V; ± 30 V 1 to 5 V |
| Input impedance | 250 Ohm |
| Precision of internal conversion | 0.1 % – 15 ppm/°C |
| Type of filter | First order digital filtering by firmware |
| Fast read cycle time | 1 ms + 1 ms x number of channels used |
| Nominal read cycle time | 5 ms for 4 channels |
| Measurement error | 0.25 % of full scale 0 to 20 mA 25 °C output; 0.25 % of full scale 4 to 20 mA 25 °C output; <= 0.35 % of full scale ± 10 V 0 to 60 °C input |
| Temperature drift | 100 ppm/°C ± 10 V output; 100 ppm/°C 0 to 20 mA output; 100 ppm/°C 4 to 20 mA output; 30 ppm/°C ± 10 V input; 30 ppm/°C 0 to 10 V input |
| Recalibration | Factory calibrated on outputs; Internal on inputs |
| Minimum crosstalk attenuation | 70 dB |
| Common mode rejection | 80 dB |
| Isolation voltage | 1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between group of I/O channels |
| Output level | High level |
| Analogue output number | 2 |
| Analogue output type | Current 0 to 20 mA; Current 4 to 20 mA; Voltage ± 10 V |
| Analogue output resolution | 11 bits, 0 to 20 mA; 11 bits, 4 to 20 mA; 12 bits, ± 10 V |
| Conversion time | <= 2 ms |
| Maximum conversion value | ± 11.25 V ± 10 V output; ± 11.25 V ± 10 V input; 0 to 30 mA 0 to 20 mA input; 0 to 30 mA 4 to 20 mA input; ± 11.25 V 0 to 10 V input |
| Fallback mode | Predefined; Configurable |
| MTBF reliability | 1400000 H |
| Operating altitude | 0 to 2000 m; 2000 to 5000 m with derating factor |
| Status LED | 1 LED (Green) RUN; 1 LED per channel (Green) channel diagnostic; 1 LED (Red) ERR; 1 LED (Red) I/O |
| Net Weight | 0.155 kg |
| Power consumption in W | 2.6 W 24 V DC typical; 3.2 W 24 V DC maximum; 0.35 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum |
| Current consumption | 240 mA 3.3 V DC |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient air temperature (operation or storage, as listed) | 0 to 60 °C |
| Relative humidity | 5 to 95 % 55 °C without condensation |
| IP Degree of Protection | IP20 |
| Product Certifications | CE; RCM; CSA; EAC; Merchant Navy; UL |
| Standards | IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201 |
Input and output data of the BMXAMM0600
Analogue inputs: 4. Analogue outputs: 2. Analogue input types: Current 0 to 20 mA; Current 4 to 20 mA; Voltage ± 10 V; Voltage 0 to 10 V; Voltage 0 to 5 V; Voltage 1 to 5 V. Input resolution: 12 bits 0 to 20 mA; 12 bits 0 to 5 V; 12 bits 1 to 5 V; 12 bits 4 to 20 mA; 13 bits 0 to 10 V; 14 bits ± 10 V.
The inputs read transmitters and the outputs drive valve positioners. The datasheet lists resolution, conversion time and the channel isolation.
Platform context of the BMXAMM0600
The module fits the BMXXBP racks of the X80 platform and is used with M340 and M580 processors. It reduces the slot count where only a few analogue points are needed.
Keep wiring of inputs and outputs apart.
Selection checklist for the BMXAMM0600
- 4 inputs and 2 outputs.
- Signal ranges.
- Rack slot.
- Wiring with shielding.
- Platform: M340 or M580.
- Power budget.
Calibration and maintenance of the BMXAMM0600
Scale in the program, check ranges per channel and use a calibrator. Keep a record of settings.
Replace in the rack with the processor power off if the manual requires.
Typical applications of the BMXAMM0600 in Oman and the GCC
In Oman and the GCC it handles flow and pressure loops in small process units.
Dimensions, environment and approvals of the BMXAMM0600
The BMXAMM0600 weighs 0.155 kg. Mounting, derating and enclosure choices follow the environmental data below, which should be compared with the actual panel temperature and the dust and humidity of the site in Oman and the GCC.
Ambient temperature limits in the datasheet: 0 to 60 °C. Relative humidity: 5 to 95 % 55 °C without condensation. Ingress protection: IP20. Operating altitude: 0 to 2000 m; 2000 to 5000 m with derating factor. Vibration resistance: 3 gn. Shock resistance: 30 gn. Standards listed: IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201. Certifications listed for this reference: CE; RCM; CSA; EAC; Merchant Navy; UL.
Mixed analogue modules like the BMXAMM0600 save slots but concentrate risk: a failure of the module affects both measurement and control of the same small loop. For critical loops it may be better to separate inputs and outputs on different modules. Check the output behaviour in the event of a stop of the processor; the configuration allows fallback to a held value or to a set value, and the choice should match valve safe position. For the inputs, use 24 V loop power from a separate supply if needed and do not exceed the input resistance limits of the datasheet. Calibrate the module with a signal source and a multimeter at commissioning, and record values. In hot cabinets analogue accuracy drifts slightly, so verify in the actual climate, which in the Gulf can differ from the factory test.
Information to send with an RFQ for the BMXAMM0600
- Full reference and quantity required
- Existing equipment, panel or rack it must fit
- Supply voltage, load or signal details of the application
- Required delivery location and timing
- Whether a spare, a replacement or a new installation
Documents and quotation
A datasheet for this product is attached on this page. It lists the electrical, mechanical and environmental data summarised above.
Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and does not represent itself as an official channel of the manufacturer.
Datasheets & Documents
- Datasheet Schneider Electric BMXAMM0600 Datasheet Download
Reviews (0)
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric BMXAMM0600 Modicon X80 Mixed
Answers from our engineering team on installation, compatibility and integration.
01What is the net weight of the BMXAMM0600?
The datasheet gives 0.155 kg.
02What ingress protection does the BMXAMM0600 list?
Stated as IP20.
03Which standards does the BMXAMM0600 list?
Listed: IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201.
04Which product range does the BMXAMM0600 belong to?
The datasheet lists the range as Modicon X80.
05What certifications does the BMXAMM0600 list?
Listed: CE; RCM; CSA; EAC; Merchant Navy; UL.
Reviews
There are no reviews yet.