- Automation & ControlView all 1,654 products
- AC Drives
- Industrial Communications
- PLC & I/O Cards
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Industrial Computers
- Servo Drives
- Isolator & Barrier
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Automation Software
- Machine Vision
- Robotics
Brand: ComAp
ComAp InteliVision 13Touch Marine Display Unit
Description
A marine-certified 13.3 inch Windows touch panel for multi-controller sites
The ComAp InteliVision 13Touch (order code RD1IV13TBME) is a 13.3 inch multi-touch panel PC that runs Windows 10 IoT Enterprise with ComAp InteliSCADA Display Pro+ pre-installed. The datasheet states that up to four controllers can be monitored and controlled at the same time, connected over Ethernet, in some cases through an InternetBridge-NT 4G.
It carries an EU RO MR marine certification, has buttons for brightness change on the front face and an IP66 front, and supports new controllers on the M1 platform. Hardware is an Intel Atom x5-E3930 processor with 4 GB RAM, 32 GB eMMC and a 240 GB SSD. The datasheet recommends not using the USB ports for monitoring. It was issued 8/28/2023.
Technical specifications
| Parameter | Specification |
|---|---|
| Order code | RD1IV13TBME |
| Datasheet version | SW 1.0, issued 8/28/2023 |
| Display | 13.3 inch TFT-LCD, 1920 x 1080 FHD, P-Cap multi-touch, 600 cd/m2, 600:1, 85 degree viewing angle |
| Processor / memory | Intel Atom x5-E3930, 1.30 / 1.80 GHz, 2 MB cache; 4 GB RAM; 32 GB eMMC + 240 GB SSD |
| Operating system | Windows 10 IoT Enterprise; InteliSCADA Display Pro+ pre-installed |
| Power supply | 10-31 V DC |
| Operating / storage temperature | -15 to +55 C / -20 to +60 C |
| Humidity | Up to 95 percent non-condensing; vibration on engine 4 grms |
| Interfaces | 2 x Ethernet 10/100/1000 RJ45; 2 x USB 2.0; 2 x USB 3.0 |
| Housing / weight | IP66 front, IP20 rear; about 3.0 kg; 355 x 248.5 x 69 mm |
| Approvals | Marine certification EU RO MR; EN 62368-1, EN 55032, EN 55035, EN 60068-2-6, -2-30, FCC Part 15 Class A, UKCA |
Where it fits
The panel suits engine rooms, switchboard fronts and control rooms where one screen must show several gen-sets or a microgrid. Compatible controllers are listed in the Supported ComAp Devices chapter of the InteliSCADA Global Guide, which the datasheet refers to. For a single set, the smaller 5 inch display may be enough.
Ordering notes
Confirm the controller list and firmware against InteliSCADA support, the network topology and the cut-out and depth available. Browse the display range in HMI Displays.
The unit has buttons for brightness change on the front face, a 600 cd/m2 backlight and a projected-capacitive touch surface, and the datasheet gives vibration data for mounting on an engine (4 grms). InteliSCADA is described as the monitoring tool for new and current controllers. The datasheet carries the FCC Part 15 Class A statement and lists dimensions of 355 x 248.5 x 69 mm with a dimension drawing for the cut-out. USB ports are not recommended for monitoring.
Documents and quotation
The ComAp datasheet is attached. Seven Star LLC supplies ComAp displays on request.
Datasheets & Documents
- Datasheet ComAp InteliVision 13Touch datasheet (EN, issued 8/28/2023) Download
Reviews (0)
About brand
ComAp is the Czech maker of controllers for gen-sets, engines and power plants: InteliLite and InteliGen gen-set controllers, InteliSys gas engine controls, InteliDrive engine controllers, InteliNeo microgrid controllers, displays and remote monitoring. It was founded in Prague on 10 April 1991 by three friends, whose families still own it; its first project was a digital announcement system for the Prague underground. ComAp is headquartered in Prague and sells in more than 100 countries through subsidiaries and distributors.
Seven Star LLC is an independent supplier in Muscat. We list ComAp controllers for generator packagers, power plant operators and maintenance teams in Oman and the GCC.
ComAp company profile
| Founded | 10 April 1991, Prague, Czech Republic |
|---|---|
| Founders | Three friends from the Mertl, Málek and Procházka families |
| Ownership | Family-owned; ComAp a.s. |
| Headquarters | Prague, Czech Republic |
| First international subsidiary | Bristol, United Kingdom, 2001 |
| Product families | InteliLite and InteliGen gen-set controllers, InteliSys and InteliSys Gas, InteliDrive engine controllers, InteliMains and InteliNeo mains and microgrid controllers, InteliVision displays, WebSupervisor and InteliConfig software |
Milestones
- 1991: ComAp is founded in a one-room office in Prague; the first project is a digital announcement system for the Prague metro.
- 2000: InteliGen, ComAp's first all-in-one gen-set controller, is launched.
- 2001: The first international subsidiary opens in Bristol, UK.
- 2002: InteliLite and InteliSys are introduced.
- 2010: WebSupervisor remote monitoring is launched.
ComAp product series
Single gen-set controllers include the InteliNano AMF 5 and the InteliLite 4 family (AMF 9, AMF 20, AMF 25 and MRS 16). Paralleling controllers include InteliGen 500 G2, InteliGen4 200, InteliGen 1000, the InteliGen 1000 SC synchroniser and load sharing unit, the InteliGen NT and NTC BaseBox and the InteliSys NTC BaseBox, plus InteliSys Gas and InteliSys 2000 for gas engines.
For the mains side there are InteliMains 510 and 1010 for mains supervision and bus-tie breakers, and InteliATS2 50 for automatic transfer switches. InteliDrive DCU controls industrial engines, and remote displays and HMI panels are also listed.
Where ComAp controllers are used
Stand-by generators for buildings, hospitals and telecom sites, prime power plants at remote oil and gas locations, multi-set paralleling plants, gas engine cogeneration and mains-parallel installations, and engine-driven pumps and compressors.
ComAp products we list
Ordering ComAp controllers: what we need
Send the full order code, including any suffix for a low-temperature or special version, together with the engine make and ECU, the AVR and governor type, the number of sets in parallel and the communication modules required. For replacements, a copy of the existing configuration archive helps us confirm a direct swap.
Facts checked against ComAp's published company history, October 2026.
Browse ComAp products by category: Diesel Generator Spare Parts.
FAQ
Questions about the ComAp InteliVision 13Touch Marine Display Unit
Answers from our engineering team on installation, compatibility and integration.
01How many controllers can it monitor?
Up to four controllers simultaneously, per the datasheet.
02Which operating system does it run?
Windows 10 IoT Enterprise with ComAp InteliSCADA Display Pro+ pre-installed.
03Does it have marine certification?
Yes, EU RO MR marine certification is listed.
04What is the supply range?
10-31 V DC.
05What is the front protection?
IP66 at the front, IP20 at the rear.
Reviews
There are no reviews yet.