Schneider Electric MiCOM P139 Feeder Protection Relay

Name: Schneider Electric MiCOM P139 Relay | Seven Star LLC
Brand: Schneider Electric

Description

Overview

The Schneider Electric MiCOM P139 Feeder Protection Relay is a numerical protection and control device engineered for overcurrent and earth-fault protection of medium-voltage feeders in substations and industrial distribution networks. Built on the established MiCOM Px40 protection platform, the P139 gives utility and industrial protection engineers in Oman and the GCC a compact, field-proven relay for feeder circuits that require reliable, selective tripping without the cost of a full-featured transformer or busbar protection relay.

As the official authorized partner and exclusive regional representative for Schneider Electric, Seven Star LLC proudly supplies the Schneider Electric MiCOM P139 Feeder Protection Relay numerical feeder protection and control relay to industrial, commercial, and utility customers across the Sultanate of Oman and the wider GCC. Every unit shipped from our Muscat-based facility is genuine Schneider Electric stock, backed by manufacturer warranty, full technical documentation, and local application support, giving panel builders and facility engineers in Oman confidence that their numerical feeder protection and control relay investment is protected from procurement through commissioning.

Operating Principle

The MiCOM P139 continuously samples current inputs from line current transformers and applies digital signal processing to calculate RMS current magnitude, comparing it against configurable overcurrent and earth-fault thresholds with independently settable time-current characteristics. When a measured value exceeds its pickup setting for the configured time delay, whether definite time or one of the standard IDMT curves, the relay issues a trip command to the associated circuit breaker and logs the fault event for post-incident analysis.

Because the Schneider Electric P139 relay is numerical rather than electromechanical, its protection curves, thresholds, and logic can be reconfigured in software without rewiring, and multiple protection stages can run in parallel to provide graded backup protection. Integrated event and fault recording gives engineers a clear timeline of current magnitude and relay operation during a disturbance, which substantially shortens root-cause investigation compared with older electromechanical feeder relays still found in parts of Oman’s distribution network.

Engineering Design of the Schneider Electric MiCOM P139

The MiCOM P139 is housed in a rugged rack or panel-mount case with a front-panel LCD and keypad for local setting review and fault display, along with a set of configurable digital inputs and output contacts for breaker control, alarms, and interlocking. Communication ports support standard substation protocols, allowing the relay to be integrated into a SCADA or substation automation system for remote monitoring and setting changes.

Internally, the Schneider Electric MiCOM P139 separates measurement, protection logic, and communication functions on dedicated processing modules, giving the relay the processing headroom to run multiple protection elements simultaneously while maintaining fast trip response times. Terminal blocks are arranged for straightforward CT and control wiring during panel building, and password-protected setting groups prevent unauthorized changes to protection parameters once the relay is commissioned.

Key Features

The Schneider Electric MiCOM P139 Feeder Protection Relay is built around design priorities that matter most to feeder protection specifiers in Oman and the GCC:

The MiCOM P139 provides overcurrent and earth-fault protection with multiple independently settable stages.
Configurable IDMT and definite-time curves allow coordination with upstream and downstream protection devices.
Integrated fault and event recording supports rapid post-disturbance investigation.
A front-panel LCD and keypad allow local setting review without a separate configuration laptop.
Standard communication protocols allow integration into SCADA and substation automation systems.
Password-protected setting groups prevent unauthorized changes to protection parameters.
Configurable digital inputs and outputs support breaker control, alarming, and interlocking schemes.
The compact Px40 platform case suits retrofit into existing feeder protection panels.

Industrial Applications

The Schneider Electric MiCOM P139 Feeder Protection Relay is deployed on medium-voltage feeder circuits in utility substations, industrial distribution switchboards, and power plant auxiliary systems across Oman, wherever selective overcurrent and earth-fault protection is required on radial or ring-fed feeders. Protection engineers in Muscat and Sohar specify the P139 for feeder bays where a full transformer differential relay would be unnecessary but electromechanical relays no longer meet modern coordination and recording requirements.

As the officially authorized partner for Schneider Electric in the region, Seven Star LLC distributes the Schneider Electric MiCOM P139 Feeder Protection Relay to panel builders, MEP contractors, and plant operators throughout Muscat, Sohar, and Salalah, supporting district cooling plants, RO desalination facilities, oil and gas installations, commercial towers, and hospital complexes across the GCC. Our regional stock holding and technical team mean that specifiers in Oman can source the Schneider Electric MiCOM P139 Feeder Protection Relay with the same lead time and support levels as a domestic supplier, without the customs delay and warranty ambiguity of grey-market imports.

Technical Specifications

The table below summarizes the key technical parameters of the Schneider Electric MiCOM P139 Feeder Protection Relay relevant to specification and procurement.

Parameter	Specification
Model	MiCOM P139 Feeder Protection Relay
Range	MiCOM Px40
Function	Overcurrent and earth-fault feeder protection
Protection Stages	Multiple independently settable
Curve Types	IDMT, definite time
Communication	Standard substation protocols
Mounting	Panel/rack mount
Display	Front-panel LCD with keypad
Application	MV feeder protection and control

Request a Quote for Schneider Electric MiCOM P139 Feeder Protection Relay

Facility engineers and procurement teams in Oman and across the GCC can request a formal RFQ for the Schneider Electric MiCOM P139 Feeder Protection Relay directly from Seven Star LLC’s instrumentation and low-voltage division. We maintain regional warehouse stock for rapid dispatch, provide the full technical datasheet on request, and offer pre-sales engineering support to confirm compatibility before order placement. As the authorized partner for Schneider Electric in Oman and the GCC, Seven Star LLC supports the Schneider Electric MiCOM P139 Feeder Protection Relay across its full lifecycle, from specification and quotation through delivery, commissioning assistance, and after-sales spares.

Related Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Schneider Electric MiCOM P139 Feeder Protection Relay”

About brand

Schneider Electric is a global leader in power management, industrial automation and digital energy solutions. The company designs and manufactures a broad portfolio including low- and medium-voltage electrical equipment, protection and control devices, PLCs, drives, HMIs, SCADA platforms and energy management software. Schneider Electric solutions are widely deployed across manufacturing plants, utilities, data centers, oil & gas facilities, buildings and critical infrastructure to improve efficiency, reliability and sustainability. With strong engineering depth and a focus on digitalization and lifecycle performance, Schneider Electric supports safe, efficient and resilient operation of modern industrial and energy systems.