Schneider Electric ZB4BV06 XB4 Blue Pilot Light Head

Description

ZB4BV06: blue Harmony XB4 pilot light head, 22 mm

The ZB4BV06 is a Schneider Electric Harmony XB4 head for a pilot light: a round, plain blue lens in a chromium plated metal bezel, made for a 22 mm panel hole and designed for the BA9s light source. Seven Star LLC supplies the ZB4BV06 in Oman and the GCC as an independent supplier based in Muscat, normally to panel builders, maintenance stores and EPC contractors who build or repair metal-style control stations.

The datasheet calls the ZB4BV06 a basic element, which has a clear meaning in practice: it is the front part only. The lamp or LED comes from a separate light block that clips behind the head. The ordering reference is not decoded in the datasheet, so the only reading offered here comes from its catalogue title, which describes a pilot light head of 22 mm with a plain blue lens for a BA9s bulb.

Metal bezel, sealing and temperature range of the ZB4BV06

The head is rated IP66, IP67, IP69, IP69K under IEC 60529, with UL type 4X/13 and an impact rating of IK06. The datasheet also records resistance to a high-pressure washer of 7 000 000 Pa at 55 °C from 0.1 m. Operation is listed from -40 to 55 °C, which is a narrower window than the LED version of the same head, because the BA9s lamp generates its own heat behind the lens. Storage is listed from -40 to 70 °C. Vibration resistance is 5 gn between 2 and 500 Hz, and shock resistance is stated as 30 gn for 18 ms and 50 gn for 11 ms.

Those figures describe the head as supplied. They hold only if the lens seal is intact and the collar is tightened correctly, so inspect the lens edge during every shutdown on outdoor or hosed-down stations and replace a head with a cracked lens or a loose bezel.

Installation and maintenance of the ZB4BV06

Push the ZB4BV06 through the panel hole from the front, fit the body and fixing collar behind it and tighten the collar, then clip in the light block. The datasheet’s mounting page gives minimum spacing figures for the standard layout, including 30 mm and 40 mm minimum dimensions, so mark and drill the panel from the drawing rather than by eye. After assembly, energise the circuit and check that the lamp lights and that the colour reads clearly in the room lighting where the panel will be used.

During maintenance, replacing a lamp does not require removing the head from the panel on every design, but replacing the lens does. Keep a spare ZB4BV06 for stations that are cleaned with water jets or exposed to sun, because lenses are the part that ages first.

Selection checklist for the ZB4BV06 and RFQ details

  • Reference this unit and quantity, one head per lamp position.
  • Lens colour blue, checked against the project colour legend.
  • Light source: BA9s; the light block behind the head must match.
  • Panel hole of 22 mm and the panel thickness, with the collar and body ordered separately.
  • Protection needed for the site: IP66 or higher, UL 4X/13, and the temperature window.
  • Marking or approvals required by the project, to be compared with the datasheet.

For the RFQ, send:

  • Part number ZB4BV06 and quantity.
  • The light block, body and collar that go with the head, with their part numbers if known.
  • Supply voltage of the lamp circuit.
  • Panel thickness and the legend plates required.
  • Delivery location and schedule.

Technical specifications of the ZB4BV06

Parameter Specification
Manufacturer / part number Schneider Electric / ZB4BV06
Range Harmony XB4
Product type Head for pilot light
Device presentation Basic element
Lens colour Blue
Lens With plain lens
Compatible light source BA 9s
Head shape Round
Head type Standard
Bezel material Chromium plated metal
Mounting diameter 22 mm
Overall size (W × H × D) 29 × 29 × 31 mm
Net weight 0.027 kg
Electrical composition codes P3 in front mounting with BA 9s; P4 in front mounting with BA 9s and transformer
High-pressure washer resistance 7 000 000 Pa at 55 °C, distance 0.1 m
Degree of protection IP66, IP67, IP69, IP69K (IEC 60529)
UL enclosure type 4X/13
IK impact rating IK06 conforming to IEC 50102
Operating temperature -40–55 °C
Storage temperature -40–70 °C
Vibration resistance 5 gn, 2–500 Hz (IEC 60068-2-6)
Shock resistance 30 gn (duration = 18 ms); 50 gn (duration = 11 ms)
Standards IEC 60947-5-1, IEC 60947-1, UL 508, JIS C8201-5-1, IEC 60947-5-5, CSA C22.2 No 14, IEC 60947-5-4, JIS C8201-1
Warranty 18 months

What the ZB4BV06 does and does not include

A pilot light assembled in this range has three layers: the head with its lens, a body and fixing collar, and a light block carrying the lamp and its terminals. The this unit covers only the first layer. It supplies the coloured lens and the chromium bezel, and it presents the light to the operator, but it does not light anything on its own and it does not clamp itself into the panel without the collar behind it.

Its compatibility field reads BA 9s, and the electrical composition codes are P3 for front mounting with a BA 9s lamp and P4 for the same with a transformer. That means the light block behind it must be one built for a BA9s bulb, with the bulb fitted separately, because the datasheet for light blocks of that type says the bulb is not included.

Comparing the ZB4BV06 with the other pilot light heads in the lane

Three pilot light heads in this group share the 22 mm mounting, the round plain lens and the metal bezel. They differ in lens colour and in the light source family that they are meant for.

Reference Lens colour Compatible light source Depth
ZB4BV053 Orange Universal LED 30 mm
ZB4BV06 Blue BA 9s 31 mm

The practical rule is simple: match the head to the block. A head for the universal LED family goes with an LED block, and a head for BA9s goes with a bulb block.

Lens colour: blue on the panel

Blue is the least common panel colour and is usually kept for mandatory-action or special-purpose messages such as a manual reset needed, local control selected or a maintenance state. The this unit carries the blue lens, so the colour is fixed by the head and not by the lamp behind it; a white lamp or LED behind a blue lens simply appears blue. Check the colour against the project legend before ordering, because changing a lens after commissioning means pulling the head out of a finished door.

The lens is plain, with no marking, so the function is identified on a legend plate or nameplate beside the lamp. On a crowded door that plate matters as much as the colour does.

Typical uses of the ZB4BV06 in Oman and the GCC

A blue pilot light head of this kind fits motor control stations, pump houses, desalination skids, switchgear doors, packaged equipment and local control boxes in oil and gas, petrochemical, power and water facilities. In the Gulf the stresses are heat inside sun-loaded enclosures, fine dust and salt-laden humidity, which is why a metal bezel with a sealed lens is chosen for outdoor stations. The this unit is used for the indication role of its colour, and the lamp behind it provides the light.

Because the head and the block are separate items, a plant can stock a few lens colours and a few block types and assemble the combination needed, instead of holding every finished lamp. That helps store planning, but it also means that an enquiry should name both parts.

Documents and quotation

The Schneider Electric datasheet for the ZB4BV06 is attached on this page for your technical file. It carries the dimensions, electrical and environmental data summarised above, and is the document to compare with your project requirement before you order.

To request a quotation, send the part number ZB4BV06, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and does not act for the manufacturer, so please check that the datasheet data suits your application before ordering.

Other Models in the Se Xb4 Pilot Head Range

Seven Star LLC supplies models from the Se Xb4 Pilot Head range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric ZB4BV053 XB4 Orange Pilot Light HeadAutomation AccessoriesView details
Schneider Electric ZB4BV06 XB4 Blue Pilot Light HeadAutomation AccessoriesYou are viewing this model
Schneider Electric ZB4BV063 XB4 Blue Pilot Light HeadAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric ZB4BV06 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric ZB4BV06 XB4 Blue Pilot Light Head

Answers from our engineering team on installation, compatibility and integration.

01Does the ZB4BV06 include the lamp or LED?
No. The datasheet describes a head and a basic element, so the light block with the lamp or LED, and the body and fixing collar, are separate items.
02Which light source is the ZB4BV06 made for?
The compatibility field lists BA 9s. It is intended for blocks that take a BA9s bulb.
03What protection rating does the ZB4BV06 have?
The datasheet lists IP66, IP67, IP69, IP69K under IEC 60529, UL type 4X/13 and IK06, with operation from -40 to 55 degrees C.
04What panel hole does the ZB4BV06 need?
The mounting diameter is 22 mm, with a round head 29 mm across; the datasheet's mounting drawing recommends a finished hole of 22.5 mm.
05Does Seven Star LLC supply the ZB4BV06 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we reply with availability.