Brand:

Samson 3804-1 Pneumatic Pressure Transmitter, 0.25-20 bar

Description

Samson 3804-1 pneumatic pressure transmitter, 0.25 to 20 bar spans

The Samson 3804-1 is a pneumatic pressure transmitter for pneumatic control systems with operating pressures from 0 to 20 bar. It measures the process pressure of liquids, gases or vapors and converts it into a pneumatic output signal of 0.2 to 1.0 bar (3 to 15 psi is possible). The device works on the force-balance principle and uses exchangeable metal bellows measuring elements, which cover measuring spans from 0.25 to 20 bar.

Everything that touches the process medium is stainless steel in the standard version, and the ambient range of –35 to +120 °C is wide. Seven Star LLC supplies the Samson 3804-1 in Oman and the GCC as an independent supplier in Muscat for plants that keep pneumatic loops in service, including hazardous-area applications.

Understanding the 3804-1 designation

Type 3804-1 is the standard version for direct connection of the process medium with a lower range value pe = 0 bar. A sibling, the Type 3804 DM, has a diaphragm seal for special process media and is covered by its own datasheet T 7550. The article code defines the measuring span, with a G ½ process connection and 1/8-27 NPT pneumatic connections at the side.

3804-1 technical specifications

Parameter Specification
Manufacturer / part number Samson / 3804-1 (pneumatic pressure transmitter, datasheet T 7540)
Measuring span Continuously adjustable 0.25 to 6 bar, or 0.8 to 20 bar, depending on the element; maximum span ratio 1:25
Overload Ten times the adjusted span, not above 25 bar (6 bar element) or 50 bar (20 bar element)
Ultimate strength Up to 60 bar (6 bar element) or 100 bar (20 bar element)
Measuring element Metal bellows 1.4404; volume 12 cm³ or 6.4 cm³
Supply air 1.4 ± 0.1 bar (20 ± 1.5 psi), air quality per ISO 8573-1
Output 0.2 to 1 bar (3 to 15 psi possible)
Air consumption Steady state below 0.15 mn³/h; maximum air capacity 1 mn³/h
Accuracy figures Linear; deviation from linearity below 0.5 %; hysteresis below 0.5 %; dead band below 0.05 %
Temperature Ambient –35 to +120 °C (lower on request); storage –50 to +120 °C; influence below 0.03 %/K
Protection and weight IP 54; approx. 2.7 kg
Process connection G ½ B per DIN EN 837-1, connection nipple 1.4571
Mounting 2 inch pipe clamp (horizontal or vertical) or wall mounting plate

How the 3804-1 balances force into air pressure

Process pressure acts on a metal bellows and produces a force that is passed through a balance beam and a movable span rider to a compensation beam. The air output pressure acts on a feedback bellows, which balances that force. A flapper and nozzle detect any imbalance, and a pneumatic booster raises or lowers the output until equilibrium returns. Because of the relay arrangement, the gap between flapper and nozzle is practically zero, and spring and pivot hysteresis have little influence on the measurement.

Span is set by turning a spindle that moves the span rider, and zero is adjusted at a screw without removing the cover. The booster section, comprising the feedback bellows, nozzle and booster, can be replaced easily.

Where the 3804-1 fits and related Samson parts

The transmitter belongs to the Samson pneumatic Series 420 measuring and control equipment: its output can feed pneumatic controllers such as the Type 3421 compact controller or, via a p/i converter such as the 6132, an electrical control system. For corrosive or viscous media use the diaphragm seal Type 3804 DM, and the 7311 air control system is another pneumatic building block.

3804-1 selection and ordering checklist

  • Maximum and minimum process pressure, and the span needed within the 0.25 to 20 bar range.
  • Medium compatibility with stainless steel 1.4404 and 1.4571 and the FPM O-rings.
  • Need for a diaphragm seal (3804 DM) for aggressive or sticky media.
  • Instrument air supply of 1.4 bar and a filter regulator.
  • Mounting: pipe clamp or wall plate.

Installation, commissioning and maintenance of the 3804-1

Mount the transmitter with the base horizontal and the process connection pointing down. Other positions are allowed if the air connections stay above the process connection, though the zero must then be corrected. For pressure measurement of flammable gases and vapors the datasheet tells users to install a type-approved flame arrester in the measuring line.

Commission by connecting a reference pressure, setting the span with the spindle and the zero with the screw, and checking the 0.2 and 1.0 bar outputs. Maintenance is mostly air supply care: use a filter regulator, purge condensate and keep the nozzle clean.

Typical applications of the 3804-1 in Oman and the GCC

Pneumatic transmitters still serve in older oil and gas facilities, power plants and chemical sites where intrinsic safety is simple because no electricity is involved in the loop. In Oman and the GCC they are used for pressure in utility air, fuel gas and steam lines, and as replacement units where original panel instruments cannot be changed. The –35 to +120 °C range covers hot steam-line locations.

Sizing tip: choose the element so that the normal working pressure sits in the middle of the span, because the datasheet permits overloads of ten times the adjusted span up to the stated limit, but accuracy is best when the measurement is not squeezed at the bottom of the range. If the process pressure fluctuates sharply or contains pulsation, a damping device or throttle in the measuring line protects the bellows and steadies the output.

Information to send with an RFQ for the 3804-1

  • Pressure range and span, with the process medium.
  • Process and pneumatic connection details.
  • Mounting method and ambient conditions.
  • Diaphragm seal need.
  • Quantity and delivery location.

Documents and quotation

The Samson datasheet T 7540 for the 3804-1 is attached on this page.

Send the pressure range and medium, and Seven Star LLC will quote the Samson 3804-1 transmitter.

Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SAMSON is a German manufacturer of control valves, actuators, positioners and self-operated regulators. Hermann Sandvoss founded the company in Düsseldorf on 1 April 1907, and its first important product was a thermostatic valve that controlled temperature without external power. After moves to Mannheim, SAMSON settled in Frankfurt am Main in 1916, where SAMSON AG is still headquartered.

Seven Star LLC supplies Samson control valves, pneumatic actuators and positioners to process plants in Oman, including the types listed on this page and their replacement units.

Samson company profile

Founded 1 April 1907, Düsseldorf, by Hermann Sandvoss, as VULCAN Technische Apparate Baugesellschaft; products sold under the SAMSON name
Headquarters Frankfurt am Main, Germany, since 1916
Legal form SAMSON AG
First product A self-operated thermostatic valve
Group brands SAMSON together with PFEIFFER, LEUSCH, VETEC and AIR TORQUE
Product families Globe valves such as Type 3241, rotary and butterfly valves, 3271 and 3277 pneumatic actuators, 3730 and 3731 positioners, self-operated pressure and temperature regulators

Milestones

  • 1907: Hermann Sandvoss founds the company in Düsseldorf.
  • 1909: It is re-established as SAMSON Apparatebau GmbH.
  • 1916: After a period in Mannheim, the company moves to Frankfurt am Main.
  • 1975: The name becomes SAMSON Mess- und Regeltechnik.

Samson valve, actuator and positioner types

Samson builds a control valve from modules. The Type 3241 globe valve is the general-service body of Series 240, and the Type 3251 is the Series 250 body for higher pressure ratings. Either one is combined with a Type 3271 pneumatic diaphragm actuator or a Type 3277, whose yoke allows the positioner to be attached directly with a concealed travel linkage.

Among the positioners listed are the Type 3725 and the Type 3730 family: the 3730-1 as the basic electropneumatic version, sold in its current generation as TROVIS 3730-1, and the 3730-3 with HART communication and valve diagnostics. Samson also makes PROFIBUS PA and FOUNDATION fieldbus variants in the same family, plus self-operated pressure and temperature regulators.

Where Samson valves are used

Samson control valves throttle steam, gas and liquids in chemical and petrochemical units, refineries, gas processing, power stations, water and desalination plants, and food production. Many reach site as part of a skid or package, so the plant instrument team often meets them first when a positioner or actuator needs replacing. We supply these items to end users and contractors throughout the GCC.

Samson products we list

Family Examples
Valve Positioners 3730-3 Electropneumatic Smart Positioner, TROVIS 3730-1 Electropneumatic Positioner, Type 3725 Electropneumatic Positioner, Type 3767 Electropneumatic Positioner, Type 4763 Electropneumatic Positioner
Control Valves Type 3241 Globe Control Valve, Type 3244 Three-Way Control Valve, Type 3251 Globe Control Valve, Type 3310 Segmented Ball Control Valve
Valve Actuators Type 3271 Pneumatic Diaphragm Actuator, Type 3277 Pneumatic Actuator for Integra…, Type 3374 Electric Linear Actuator
Solenoid Valves Type 3963 Solenoid Valve for Pneumatic A…

Ordering Samson parts: what we need

Every Samson device has a nameplate with the type, a configuration ID (Var-ID) and a serial number. A photo of that plate is the surest route to an exact match. Without it, please send:

  • Valve: type, DN or NPS, pressure rating, body and trim material, Kvs or Cv, plug and seat style, packing and bonnet type
  • Actuator: type, effective area in cm², bench range, fail action and travel
  • Positioner: full type code including Ex protection, communication and options such as limit switches or position transmitter

We check the code against Samson documentation and provide the manufacturer's data sheet on request.

Facts checked against SAMSON's corporate chronicle and press material, October 2026.

FAQ

Questions about the Samson 3804-1 Pneumatic Pressure Transmitter,

Answers from our engineering team on installation, compatibility and integration.

01What does the Samson 3804-1 measure?
It measures pressure of liquids, gases and vapors up to 20 bar and gives a pneumatic output signal of 0.2 to 1.0 bar.
02What measuring spans are available?
Spans are continuously adjustable from 0.25 to 6 bar or from 0.8 to 20 bar, depending on the measuring element, with a maximum span ratio of 1:25.
03What supply air is required?
Supply air is 1.4 bar (20 psi), within ± 0.1 bar, with ISO 8573-1 quality classes for particles, oil and water.
04Which materials touch the process?
Wetted parts are stainless steel: the bellows is 1.4404 and the connection nipple 1.4571. A diaphragm-seal version, the 3804 DM, handles special media.
05Can it be used in hazardous areas?
The datasheet states it can be used in Zones 1 and 2, and a type-approved flame arrester must be installed in the line when measuring flammable gases and vapors.