- Automation & ControlView all 2,810 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Pepperl+Fuchs
Pepperl+Fuchs HiC2031 SMART Current Driver
Description
Pepperl+Fuchs HiC2031 overview
The Pepperl+Fuchs HiC2031 is a one-channel isolated barrier from the HiC series of Pepperl+Fuchs that repeats a control system signal to drive HART I/P converters, valve actuators and displays located in a hazardous area. Digital signals are superimposed on the analog values at the field side or control side and are transferred in both directions. An open field circuit presents a high impedance to the control side so that alarm conditions can be monitored.
The datasheet released on 5 June 2023 describes a bus powered device with a 4 to 20 mA current output into loads up to 650 ohm, low power dissipation and a safety integrity level of up to SIL 2 with systematic capability SC 3. It mounts on a HiC termination board.
Key features of the Pepperl+Fuchs HiC2031
- One-channel isolated barrier repeating a 4 to 20 mA control signal to the field
- Drives HART I/P converters, valve actuators and displays in hazardous areas
- Current output up to 650 ohm load with at least 13 V at 20 mA
- Bi-directional digital communication with bandwidth 0 to 3 kHz
- Up to SIL 2 with systematic capability SC 3
- Bus powered, 19 to 30 V DC, through the HiC termination board
- High input impedance on an open field circuit for alarm monitoring
- Ambient temperature from minus 40 to 70 degrees C, 12.5 mm wide
HiC2031 technical specifications
The values below are taken from the manufacturer datasheet of the HiC2031, release date 2023-06-05. Always confirm the current datasheet and the certificates before final engineering.
| Parameter | Value |
|---|---|
| Model | HiC2031, SMART Current Driver, 1-channel isolated barrier |
| Signal type | Analog output |
| Safety integrity | SIL 2, systematic capability SC 3 |
| Supply | 19 to 30 V DC, bus powered via termination board |
| Rated current | Up to 30 mA at 24 V |
| Power dissipation / consumption | Up to 600 mW at 20 mA and 500 ohm / up to 700 mW |
| Input | 4 to 20 mA, limited to about 26 mA; voltage drop about 6 V at 20 mA |
| Input resistance | More than 100 kilohm with field wiring open |
| Output | 4 to 20 mA, at least 13 V at 20 mA, load 0 to 650 ohm |
| Deviation at 20 degrees C | Less than 0.1 percent of full scale including non-linearity and hysteresis |
| Rise time 10 to 90 percent | Up to 10 ms |
| Ambient temperature | Minus 40 to 70 degrees C |
| Dimensions / mass | 12.5 x 106 x 128 mm (W x H x D) / about 100 g |
| Marking | Output [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I; Zone 2 Ex ec IIC T4 Gc |
The hazardous-area parameters are listed per terminal pair in the datasheet. Use the entity values of the exact terminals you wire, and refer to the certificate for the permitted cable parameters of your installation.
Typical applications in oil and gas, utilities, water and manufacturing
Control valves, I/P converters, electropneumatic positioners and indicators are the final elements of many process loops in oil and gas, power and water plants, and a good number of them sit in Zone 1 or Zone 2 areas. The HiC2031 carries the control signal from the safe area to such devices through an intrinsically safe circuit, so the plant can keep a standard analog output card while the field circuit stays protected.
Typical uses in Oman and the GCC include flow and pressure control valves on pipelines, anti-surge and recycle valves on compressor trains, and dosing or level control in water treatment works. A galvanic isolator also avoids ground loops between the control room and a distant field device, which can improve signal quality on long cable runs.
Selection and compatibility notes for HiC2031
Compare the load of the field device with the output capability of the HiC2031. Positioners and I/P converters differ in their input resistance and operating voltage, and the datasheet gives the available voltage and the permitted load at 20 mA. The control-side output must also be able to drive the module, which adds a voltage drop in series with the loop.
Decide whether HART signals need to pass through. Where an asset management system talks to smart positioners, the signal path must carry bi-directional digital communication; where the loop carries a plain analog signal the requirement is simpler. Share the loop data with us if you are unsure whether the HiC2031 suits the device.
Installation and commissioning of the HiC2031
Before mounting the HiC2031, confirm the field device and cable parameters against the entity values in the datasheet and the certificate, and decide whether the module will be powered from a Power Rail, a termination board or its own supply terminals. Mount it in a clean, ventilated cabinet in the safe area, keep hazardous-area and safe-area wiring physically separated and labelled, and respect the spacing and marking required by your site rules for intrinsically safe circuits.
Wire the HiC2031 only to the terminal assignment printed in the wiring diagram, tighten the screws and check that no strands are left outside the clamp. After applying the supply, check the power indication, then simulate the field signal and prove the complete loop from field to control system before the plant is handed over. Record the as-found readings so that later loop checks of the HiC2031 can be compared with the commissioning values.
Maintenance and service life
The HiC2031 has no serviceable parts, so maintenance is mostly inspection. During planned shutdowns, check terminals for looseness and corrosion, verify the supply voltage at the module, and repeat the loop check that was recorded at commissioning. In coastal and humid locations such as Muscat, Sohar and Duqm, a clean, dry and sealed cabinet greatly extends the life of any electronic interface.
If a loop drifts out of tolerance or the unit shows no power indication with a healthy supply, replace the module instead of attempting a repair, and keep the replacement documentation in the loop folder. Certified intrinsically safe equipment must not be modified, and any change to cabling, load or field device should be re-assessed against the HiC2031 entity parameters before it returns to service.
Related products and ordering notes
Customers who ask for the HiC2031 often need neighbouring models or accessories from the same system, such as other HiC series isolated barriers, HiC termination boards and neighbouring SMART transmitter supplies and current drivers. If you are standardising a cabinet or a spare parts list on one family, send us the loop list or the equipment list and we can quote the matching items together.
When you send an enquiry for the HiC2031, quote the full part number exactly as printed on the nameplate, the quantity and the intended application. If you are replacing an installed unit, a photograph of the nameplate helps us confirm the exact variant you need. We can arrange a quotation with delivery to Oman and across the GCC.
Frequently asked questions about HiC2031
The HiC2031 is a SIL 2 capable one-channel SMART current driver for I/P converters and valve actuators, bus powered, with a 4 to 20 mA output into up to 650 ohm and a 12.5 mm wide housing.
Documents and quotation
A copy of the manufacturer datasheet for the HiC2031 is attached to this page for your engineering review. To request a quotation, send the RFQ with the part number HiC2031, the quantity, the delivery location and any certification or documentation requirements, and we will reply with availability and lead time. Please check the specification against your loop or system requirements before ordering.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with Pepperl+Fuchs. Product names and part numbers are used only to identify the item you ask for.
Datasheets & Documents
- Datasheet HiC2031 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Pepperl+Fuchs is a German manufacturer of industrial sensors and explosion protection equipment, founded in 1945 in Mannheim by Walter Pepperl and Ludwig Fuchs as a radio repair shop. Defective transformers led them into manufacturing, and the company developed its first proximity switch in the late 1950s. Pepperl+Fuchs is headquartered in Mannheim and is a pioneer of intrinsically safe electrical equipment for hazardous areas.
Seven Star LLC lists Pepperl+Fuchs sensors, isolated barriers, power supplies and hazardous-area mobile devices, and supplies them to instrument and automation teams in Oman by exact model designation.
Pepperl+Fuchs company profile
| Founded | 1945, Mannheim-Sandhofen, Germany, by Walter Pepperl and Ludwig Fuchs |
|---|---|
| Headquarters | Mannheim, Germany |
| Ownership | Privately owned (Pepperl+Fuchs SE) |
| Origins | Radio repair workshop that began making replacement transformers |
| Product families | Inductive, capacitive, ultrasonic and photoelectric sensors, rotary encoders, R2000 LiDAR scanners, KFD and HiC isolated barriers, Zener barriers, remote I/O, purge and pressurization systems, Ex-rated enclosures |
Milestones
- 1945: Walter Pepperl and Ludwig Fuchs open their radio repair shop in Mannheim.
- 1958: The first proximity switch is developed (some company sources say 1959).
Pepperl+Fuchs product families on this page
On the interface side there are two systems. The K-System mounts on DIN rail and is represented here by the KFD2-UT2-Ex2 universal temperature converter. The H-System plugs into termination boards and is represented by the HiD2030 SMART transmitter power supply with HART. The PS1000-A6-24.20 is a 24 VDC, 20 A power supply for cabinets. Sensors listed include the NJ2-12GK-SN NAMUR inductive sensor, the R101 retro-reflective photoelectric sensor and the R2000 2-D LiDAR scanner. For field staff there are the Tab-Ex 05 DZ1 tablet for Zone 1/21 areas and the Smart-Ex 03 DZ2 smartphone for Zone 2/22 and Division 2 areas.
Where Pepperl+Fuchs equipment is used
Isolated barriers sit between field instruments in Zone 0 or Zone 1 and the DCS or safety system in refineries, gas plants and chemical works. NAMUR sensors report valve position and machine states in classified areas. Photoelectric sensors and LiDAR scanners work in conveying, packaging, warehousing and vehicle guidance. Ex-rated tablets and phones are carried on operator rounds and maintenance jobs.
Pepperl+Fuchs products we list
Ordering Pepperl+Fuchs parts: what we need
Send the complete model designation as printed on the device, including every suffix; a single letter can change the supply voltage or the output type. Add the part number if the label shows one. For barriers, tell us the field device and signal type, the number of channels and whether the safety loop needs a SIL-assessed module. For mobile devices, state the zone or division and the regional radio version.
Facts checked against Pepperl+Fuchs's own chronicle pages, October 2026.
Browse Pepperl+Fuchs products by category: Sensors & Transmitters, Industrial Computer, Isolator & Barrier, Power Modules.
FAQ
Questions about the Pepperl+Fuchs HiC2031 SMART Current Driver
Answers from our engineering team on installation, compatibility and integration.
01What is the HiC2031 used for?
It drives HART I/P converters, valve actuators and displays in a hazardous area from a 4 to 20 mA control system output, with digital communication passing in both directions.
02What load can the HiC2031 drive?
The output supplies 4 to 20 mA into loads from 0 to 650 ohm, with at least 13 V available at 20 mA.
03How is the HiC2031 powered?
It is bus powered with 19 to 30 V DC through the HiC termination board on which it is mounted.
04Which documents are available for the HiC2031?
The manufacturer datasheet is attached to this page, and certificates or manuals can be requested together with your RFQ for the HiC2031.
05How do I order the HiC2031?
Send an RFQ with the part number HiC2031, the quantity and the delivery location in Oman or the GCC, and Seven Star LLC will reply with availability and lead time.


















Reviews
There are no reviews yet.