Brand:

LESER Type 462 Soft-Seal Threaded Safety Valve

Description

Overview

The LESER Type 462 is the soft-seal variant within LESER’s compact performance threaded safety valve range, sharing its DN 15 to DN 20 (NPS 1/2 inch to 1 inch) size envelope and 250 bar (3625 psig) maximum set pressure with the metal-seated Type 459, but replacing the metal disc-to-seat interface with a resilient soft-seal element. That single design change gives the Type 462 a real practical advantage: tighter shut-off and reduced leakage in the approach to set pressure, which matters on process media where even minor seat weeping before lift is a product-loss, safety, or environmental concern. LESER’s decision to offer both a metal-seated and a soft-seated version of essentially the same threaded platform lets specifying engineers choose the sealing technology that fits their process chemistry and shut-off requirement without changing the surrounding pipework.

With fast quotation turnaround and technical support, Seven Star LLC proudly supplies the LESER Type 462 to industrial customers across Oman and the GCC. Where a process stream cannot tolerate pre-lift seepage – refined product lines, high-value gas streams, or emissions-sensitive service in Muscat, Sohar, and Salalah – our instrumentation division specifies and stocks the Type 462 in place of a metal-seated equivalent, with the same certified LESER documentation and regional technical support behind every unit.

Operating Principle

The Type 462 operates on the identical direct spring-loaded principle common to every LESER safety valve: system pressure acting on the disc through the nozzle bore is opposed by a factory-calibrated spring, and once that opposing force is overcome the disc lifts fully off its seat to relieve the excess pressure. What differs from the Type 459 is purely at the sealing interface – the Type 462 disc carries a resilient soft-seal element rather than a lapped metal face, so the seal conforms more closely to microscopic surface imperfections on the seat and holds a tighter bubble-tight closure as the process pressure climbs toward the set point.

This soft-seal approach means the valve resists opening prematurely due to seat wear or minor surface damage that would allow a metal seat to weep slightly under high differential pressure, and it reseats cleanly once system pressure falls back below the reseating pressure without leaving a persistent leak path. As with every LESER safety valve, the mechanism is entirely self-actuated: no external power, air supply, or control signal is required, and the valve reverts to a fully closed, sealed state automatically once the overpressure event has passed.

Engineering Design of the LESER Type 462

Physically, the LESER Type 462 body and threaded connection sizing mirror the Type 459 platform across DN 15 to DN 20 / NPS 1/2 to 1, so plants that standardize on the compact performance family can carry a common set of body castings and adjust only the disc/seat sub-assembly to match whether a given service point calls for a metal or soft seal. The bonnet houses the calibrated spring and guided disc assembly, machined to the same tolerances as the Type 459 to keep disc travel square to the seat through repeated lift-and-reseat cycles.

The soft-seal insert itself is selected for chemical compatibility with the intended process media and for the valve’s rated temperature range, and like the rest of the compact performance family the set pressure is adjusted through a top-mounted spring adjustment screw, sealed tamper-evident once the valve has been calibrated and certified on a factory test bench. Every Type 462 is supplied with a traceable test report confirming its as-set opening pressure, and the soft-seal element is a routinely replaceable maintenance item rather than a full valve rebuild during scheduled service.

The LESER Type 462 is specified whenever pre-lift tightness matters most. Key features of the LESER Type 462 soft-seal threaded safety valve include:

  • Soft-seal disc design engineered specifically for tighter shut-off and reduced pre-lift leakage compared with a metal-seated equivalent.
  • DN 15-20 / NPS 1/2-1 size range sharing the same compact performance platform as the Type 459.
  • Maximum set pressure of 250 bar (3625 psig) despite the soft-seal design, matching high-pressure duty requirements.
  • Threaded (screwed) inlet and outlet connections for compact installation on manifolds and skids.
  • Direct spring-loaded operation with no external power, air, or control signal required.
  • Factory-set and certified opening pressure with a traceable test report supplied with every valve.
  • Replaceable soft-seal insert selected for compatibility with the specific process media and temperature range.
  • Tamper-evident spring adjustment sealing that preserves the certified set pressure through installation and service life.

Industrial Applications

The LESER Type 462 is the preferred choice wherever seat tightness ahead of set pressure carries a real commercial or safety cost – refined petroleum product terminals, high-value or odorized gas distribution, and process streams where even minor leakage past a metal seat would trigger emissions or product-loss concerns. These conditions are common across Oman’s downstream petroleum and gas distribution infrastructure, including terminal and blending operations serving the Sohar and Salalah economic zones, where tight shut-off directly protects both safety margins and product accounting.

With engineering support in Muscat, Seven Star LLC supplies the Type 462 on request to refineries, terminal operators, and industrial gas distributors throughout Oman and the wider GCC, helping customers decide between the soft-seated Type 462 and the metal-seated Type 459 based on the specific process fluid and shut-off requirement. Every Type 462 supplied through our instrumentation division comes with LESER documentation and technical support.

Technical Specifications

The table below summarizes the core technical data for the LESER Type 462 soft-seal threaded safety valve, LESER’s tighter-shutoff alternative to the Type 459.

Parameter Specification
Model LESER Type 462
Valve Type Threaded (screwed) safety valve, soft-seal disc
Nominal Size Range DN 15 – DN 20 (NPS 1/2″ – 1″)
Maximum Set Pressure 250 bar (3625 psig)
Sealing Type Soft seal (resilient disc insert) for tighter shut-off
Connection Type Threaded / screwed inlet and outlet
Actuation Direct spring-loaded, self-actuated
Manufacturer LESER GmbH & Co. KG, Germany

Request a Quote for LESER Type 462

Seven Star LLC is ready to process a formal RFQ for the LESER Type 462 soft-seal threaded safety valve, with lead time confirmed at quotation for customers across Oman and the GCC. Technical datasheets are available for download, and our instrumentation division can advise on whether the soft-seated Type 462 or the metal-seated Type 459 best matches your process media, temperature, and shut-off requirements. Backed by manufacturer datasheet documentation, Seven Star LLC supplies the product with manufacturer documentation and technical support – contact us today to specify or order the Type 462.

Also available: LESER Type 441/442 DIN High Performance Safety Valve

Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

LESER is the German safety valve manufacturer whose history goes back to 16 March 1818, when Georg Wittmann started a brass foundry in Hamburg. The company built its first safety valve for steam boilers in 1885 and has focused only on safety valves since the 1970s. Its production sites are in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

Seven Star LLC is an independent supplier in Muscat. We list LESER spring-loaded and pilot-operated safety valves and change-over valves, and supply them and their spare parts to refineries, gas plants, boiler houses and process plants in Oman and the GCC.

LESER company profile

Origins 16 March 1818, Hamburg: brass foundry founded by Georg Wittmann
Safety valves First safety valve for steam boilers in 1885; safety valves only since the 1970s
Production Hohenwestedt (Germany), Paithan (India), Tianjin (China)
Product families API, High Performance, Compact Performance, Critical Service, Clean Service, High Pressure, Modulate Action and pilot-operated safety valves, plus change-over valves

Milestones

  • 1818: Georg Wittmann founds a brass foundry in Hamburg on 16 March.
  • 1885: LESER makes its first safety valve for steam boilers.
  • 1970s: The company concentrates on safety valves only.
  • Today: Production in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

LESER products we list

Series Types Typical use
API series Type 526, 526 CC Refinery and petrochemical relief to API 526
High Performance 441/442 DIN, 441/442 ANSI, 444 Steam, gases and liquids in general process and boiler service
Compact Performance 437, 459, 462 Small threaded valves for compressors, vessels and utilities
Critical Service 447, 449 Toxic, corrosive or high-pressure media, and block-body designs
High Pressure 457/458 High-pressure gas and liquid systems
Clean Service 483, 488 Food, pharmaceutical and clean steam
Pilot-operated, Modulate Action 811, 821 Large capacities and operation close to set pressure
Change-over valves 310 Two safety valves in parallel, so one can be serviced while the other protects the system

A spring-loaded safety valve opens when the system pressure overcomes the spring force at the set pressure. A pilot-operated valve uses the system pressure itself to hold the main valve shut, so it stays tight much closer to the set pressure and suits large flows. Sizing follows the required relief capacity from the worst-case scenario. API 526 fixes the flange sizes and orifice letters (D to T), so an API valve with the same orifice can replace one from another maker.

Where LESER safety valves are used

In Oman and the GCC, LESER safety valves protect vessels, heat exchangers, compressors, pumps, steam boilers and pipelines in oil and gas, refining, LNG, petrochemical, power and desalination plants.

Ordering LESER safety valves: what we need

Send the LESER type and article number from the nameplate, or the data sheet with the medium, set pressure, relieving temperature, required capacity, back pressure, inlet and outlet sizes and pressure classes, and the materials. For spare parts, send the serial number of the valve.

Facts checked against LESER company history (200th anniversary, 2018), October 2026.

FAQ

Questions about the LESER Type 462 Soft-Seal Threaded Safety Valve

Answers from our engineering team on installation, compatibility and integration.

01How is the LESER Type 462 different from the Type 459?
Both share the same DN 15-20 / NPS 1/2-1 compact performance platform and 250 bar maximum set pressure, but the Type 462 uses a soft-seal disc insert instead of a metal seat, giving it tighter shut-off and less leakage as pressure approaches the set point.
02When should I choose the soft-seal Type 462 over a metal-seated valve?
The Type 462 is the better choice whenever pre-lift seat tightness matters most, such as refined product lines, high-value or odorized gas distribution, and emissions-sensitive process streams where even minor weeping is unacceptable.
03What is the maximum pressure rating of the LESER Type 462?
The Type 462 is rated up to 250 bar (3625 psig) across its DN 15-20 size range, matching the pressure capability of the metal-seated Type 459 while adding a soft-seal sealing element.
04Can the soft-seal insert be replaced during routine maintenance?
Yes, the soft-seal element is a routinely replaceable maintenance item selected for compatibility with the specific process media and temperature, so seat renewal does not require a full valve rebuild.
05Is Seven Star LLC an experienced supply partner for LESER products?
Yes, Seven Star LLC is an experienced supplier of LESER safety valves in Oman and the GCC, supplying genuine product with full documentation, certified test reports, and local technical support.