- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm RV3100 Incremental Encoder, Magnetic, 1-10000 ppr
Description
ifm RV3100 Incremental Encoder, Magnetic, 1-10000 ppr
The ifm RV3100 is an incremental encoder with a magnetic detection system and a 10 mm solid shaft on a clamping flange. The resolution can be programmed from 1 to 10000 pulses per revolution (factory setting 1024) through IO-Link, so one device can stand in for several fixed-resolution encoders. The output runs from a supply of 4.75 to 30 V DC, the factory output is HTL with up to 50 mA per output, and the signals A and B are shifted by 90 degrees.
The housing is stainless steel with an aluminium flange, 58.6 mm in diameter and 79.5 mm long, and the accuracy is 0.1 degrees. Seven Star LLC supplies the RV3100 in Oman and the GCC as an independent supplier.
RV3100 technical specifications
The table lists the values published by the manufacturer for the RV3100. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / RV3100 |
| Resolution | 1 to 10000 (parameterisable; Factory setting: 1024) resolution |
| Function principle | incremental |
| Detection system | magnetic |
| Dimensions [mm] | Ø 58.6 / L = 79.5 |
| Operating voltage [V] | 4.75 to 30 DC |
| Current consumption [mA] | < 150 |
| Electrical design | HTL/TTL |
| Communication interface | IO-Link |
| Shaft design | solid shaft |
| Shaft diameter [mm] | 10 |
| Accuracy [°] | 0.1 |
| Max. revolution, mechanical [U/min] | 12000 |
| Max. revolution electrical [U/min] | 12000 |
| Ambient temperature [°C] | -40 to 85 |
| Protection | IP 65; IP 66 (on the housing: IP 67; on the shaft: IP 64) |
| Weight [g] | 392 |
| Materials | flange: aluminium; housing: stainless steel (444/1.4521) |
| MTTF [years] | 292 |
How the RV3100 works
The RV3100 is an incremental encoder with a magnetic sensing system. Rotation of the shaft produces two pulse trains, A and B, shifted by 90 degrees, so a counter can derive both speed and direction. The number of pulses per revolution is parameterised through IO-Link, which means that one device can replace several fixed-resolution versions. Magnetic sensing makes the encoder resistant to shock and vibration compared with optical designs.
Where the RV3100 fits and related parts
Where the RM9000 gives absolute position over CANopen, the RV3100 outputs pulse trains for speed, direction and relative position and is therefore suited to drive controllers, counters and PLC high-speed inputs. The programmable resolution simplifies spare parts.
Selection and ordering checklist for the RV3100
Work through the points below before you confirm the order, so that the RV3100 you receive is the one your machine or plant needs.
- Check the shaft diameter 10 mm and clamping flange
- Set resolution (1 to 10000), factory 1024
- Check output level: HTL or TTL, up to 50 mA
- Check speed: up to 12000 rpm mechanical
- Plan the radial M12 connector, which can also be used axially
The manufacturer lists this article under the type designation Incremental encoder with solid shaft, INCREMENTAL ENCODER BASIC LINE. The article number RV3100 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Mount the encoder on the clamping flange and use a flexible coupling to protect the bearings from misalignment, observing the low axial and radial shaft load limits. Connect it with a cordset to the counter or controller, and set the resolution and output type before operation. At commissioning, compare the pulses with a known shaft position, verify the direction, and check that the supply and output levels are compatible with the input. Include the coupling and connector in routine inspections.
Use a flexible coupling because the shaft loads (40 N axial and 60 N radial) are small. Adjust resolution through an IO-Link master before final installation if your controller expects a value other than 1024. The temperature range is -40 to 85 degrees Celsius, humidity up to 95 % without condensation.
Typical applications in Oman and the GCC
Speed and position measurement on motors, conveyors, pumps, fans and rollers. In Oman and the GCC, the stainless housing and magnetic sensing system work in dusty and vibrating installations.
Encoders on outdoor drives and rotating equipment face heat, dust and washdown. A flexible coupling, correct cable strain relief and a sealed connector matter more for life than the encoder resolution itself.
RV3100 compared with related ifm types
The table places the RV3100 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| RM9000 | Absolute multiturn, CANopen, 24 bit, 10 mm shaft | Related type |
| RV3100 | Incremental magnetic, 1-10000 ppr, 10 mm shaft | This page |
Information to send with an RFQ for the RV3100
To prepare an accurate offer for the RV3100, please include the following with your enquiry:
- Shaft diameter and flange style
- Pulses per revolution and the output type needed
- Supply voltage and the controller input
- Cordset type and length
- Quantity and delivery location
Storage, handling and spares for the ifm RV3100
Keep the ifm RV3100 in its original packaging until installation, and store it indoors in a dry place without condensation. Protect connectors and cable ends from dust and moisture. In hot GCC warehouses, check that the storage temperature stays inside the range given in the manufacturer datasheet before the unit is installed.
- Check the article number and connection type against the drawing before mounting.
- Use the mounting accessories and connection cables recommended for the device, and route cables away from power wiring.
- Keep at least one spare unit of each type used on critical machines, so that a failed device can be swapped quickly.
- Record the device type, firmware version where relevant, and parameter settings, so that a replacement can be set up the same way.
When you order the ifm RV3100, include the matching cables, connectors or mounting parts in the same RFQ. This avoids delays at commissioning when a small accessory is missing.
Documents and quotation
No datasheet is attached to this page. Send us the part number RV3100 and we will confirm which documents are available, such as the datasheet and operating instructions, and for IO-Link devices the device description file.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm Enc Range
Seven Star LLC supplies models from the Ifm Enc range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm RM9000 Absolute Multiturn Encoder, CANopen, 24 bit | Encoders | View details |
| ifm RV3100 Incremental Encoder, Magnetic, 1-10000 ppr | Encoders | You are viewing this model |
Datasheets & Documents
- Datasheet ifm RV3100 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm RV3100 Incremental Encoder, Magnetic, 1-10000
Answers from our engineering team on installation, compatibility and integration.
01How is the resolution of the ifm RV3100 set?
It is programmable from 1 to 10000 pulses via IO-Link, with 1024 as the factory setting.
02What output does the RV3100 have?
A HTL output (50 mA) as the factory setting, with phase difference 90 degrees between A and B.
03What supply does the RV3100 need?
4.75 to 30 V DC. This is the value published by the manufacturer for the RV3100; confirm details before ordering.
04What is the maximum speed of the RV3100?
12000 rpm. This is the value published by the manufacturer for the RV3100; confirm details before ordering.
05How does the RV3100 sense rotation?
With a magnetic detection system. This is the value published by the manufacturer for the RV3100; confirm details before ordering.


















Reviews
There are no reviews yet.