Brand:

Flowserve Limitorque L120-10 Electric Valve Actuator

Description

Flowserve Limitorque L120-10 Limitorque L120 electric valve actuator overview

The L120-10 is one of eight sizes in the Limitorque L120 series of multi-turn electric valve actuators from Flowserve. It is rated for a maximum torque of 100 ft-lb (136 Nm) and a maximum thrust of 10,000 lb (4,500 kg), with an output speed range of 12-250 rpm on 60 Hz supplies and 10-210 rpm on 50 Hz supplies. The housing is die-cast aluminum, and the gearing is a double-reduction design with lubricated metallic gearing.

L120 actuators can be mounted directly on gate valves, globe valves, penstocks and sluice gates, or combined with V or SR gearboxes for rising stem work and with WG or HBC worm gearboxes for butterfly, ball and plug valves, dampers and flop gates. The L120-10 can therefore serve both multi-turn and quarter-turn duties. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the L120-10

  • Double-reduction gearing with an alloy bronze worm gear and heat-treated steel gearing, all lubricated.
  • A four-rotor, 16-contact geared limit switch with a fully enclosed gear train, plus a torque switch with one SPST contact per direction for overload protection.
  • Class F motor insulation with two Class B thermal contacts embedded in the motor windings.
  • A manual declutch lever that disconnects the motor from the handwheel and returns to motor operation automatically when the motor is energized.
  • Weatherproof, submersible (NEMA 6 and IP68) and explosion-proof configurations, with FM and CSA approvals for the explosion-proof and weatherproof versions.
  • A range of control packages: NCU with no integral controls, BIC basic integral controls, Modutronic 20 modulating controls and UEX electronic controls with Modbus, Foundation Fieldbus, Profibus DP, Profibus PA or DeviceNet.

Flowserve Limitorque L120-10 technical specifications

Model Flowserve Limitorque L120-10 multi-turn electric actuator
Maximum torque capacity 100 ft-lb (136 Nm)
Maximum thrust capacity 10,000 lb (4,500 kg)
Output speed, 60 Hz 12-250 rpm
Output speed, 50 Hz 10-210 rpm
Housing material die-cast aluminum
Approximate weight with standard compartment 90 lb (41 kg)
Weight added by integral compartment 20 lb (9 kg)
Weight added by maximum compartment 32 lb (14 kg)
Weight added by thrust base 7 lb (3 kg)
Torque drive (type B4) bore 1.000 in with 1/4 x 3/16 rectangular key (25 mm with 8 x 6 key)
Type B4 stem nut length 3.25 in (83 mm)
Thrust drive (type A1) threaded stem 1.25 in (32.8 mm)
Type A1 stem length 2.38 in (60 mm)
Mounting base MSS FA-10 / ISO F-10
Pilot diameter 2.312 in (70 mm)
Mounting holes 4 holes, 3/8-16 x 0.88 in or M10 x 1.5 x 22.4
Bolt circle 4.016 in (102 mm)
Mounting base diameter 4.92 in (125 mm)
Handwheel ratio, standard 1:1 top mount
Handwheel gear reduction, optional 4.2:1 side mount
Motor speeds 4-pole 1800 rpm at 60 Hz or 1500 rpm at 50 Hz; 2-pole 3600 or 3000 rpm; 8-pole 900 or 750 rpm
Motor supply 3-phase 230, 460 or 575 V at 60 Hz; 380 or 415 V at 50 Hz
Nominal motor duty 15 minutes
Standard temperature range -20 to 150 degrees F (-29 to 66 degrees C)
Contact rating 300 V per ICS-125.6, 6 A resistive, 60 A inrush at 120 VAC
Weight added by side-mount handwheel 3 lb (1 kg)

Torque and thrust are the manufacturer maximums for three-phase supplies at 380, 400 or 415 V and 50 Hz, or 230, 460 or 575 V and 60 Hz. Weights are approximate figures from the manufacturer brochure. Where the brochure does not give a weight for an option on this size, consult the manufacturer, and do not rely on the numbers for lifting plans without the nameplate data.

Typical L120-10 applications in Oman and the GCC

L120 actuators are used where a robust electric operator is wanted with a modern control choice. Typical uses of the L120-10 are listed below.

  • Petrochemical installations such as refineries, pipelines, terminals and tank farms, where the manufacturer cites network compatibility, explosion-proof certification and resistance to lightning and EMI.
  • Power generation plants, where the design stands up to vibration, high-pressure steam and extreme temperature.
  • Water and wastewater treatment works, where low maintenance, modulating control and conformity to AWWA standards matter.
  • Dampers, penstocks, sluice gates and flop gates in utilities and manufacturing plants.
  • Remote or offshore valve sites that need a control package reachable over a DDC or fieldbus network.

Selecting and matching the L120-10

Start from the maximum valve torque or thrust and select the size whose rating clears it with margin. The L120-10 covers up to 100 ft-lb and 10,000 lb, so a valve above those values needs the next size. Check the drive: type B4 is a torque-only steel bushing with a bore of 1.000 in with 1/4 x 3/16 rectangular key (25 mm with 8 x 6 key), while the type A1 thrust base of this size takes a threaded stem of 1.25 in (32.8 mm). A separate thrust base is used for L120-10 through L120-85 when thrust must be carried.

The mounting base of the L120-10 is MSS FA-10 / ISO F-10, with a pilot of 2.312 in (70 mm) and 4 holes, 3/8-16 x 0.88 in or M10 x 1.5 x 22.4 on a bolt circle of 4.016 in (102 mm). Optional ISO bases exist, and the standard base is supplied to MSS with English taps. For quarter-turn valves choose a WG or HBC gearbox, for torque reduction on rising stem valves choose a V or SR gearbox, and for fast, high-temperature seating on L120-190 and larger sizes the manufacturer lists an L120S spring-compensated stem nut.

Installation and commissioning of the L120-10

The L120-10 nameplate, found on the back of the actuator, states the actuator size, order number and serial number, and the motor nameplate lists the motor data, so record both before installation. Mount the actuator on the valve with the correct drive bushing or stem nut, using the bolt pattern in the table, and check the grease level in the gear case before first use, especially if the unit has been stored.

Commissioning covers setting the double torque switch, setting the geared limit switch rotors, calibrating any position transmitter, and checking the wiring diagram supplied with the order. Do not set the limit switch with an electric drill in an explosive atmosphere. Use the handwheel to place the valve between its end positions before the first power-on run.

Maintenance of the L120-10

The L120-10 has a sealed gear case, grease-lubricated gearing and anti-friction bearings, and a gear-driven limit switch compartment behind an O-ring sealed cover. Follow the maintenance interval and lubricant recommendations in the manufacturer manual for your actuator size and control package, inspect the compartment for moisture, keep gasketed surfaces clean and keep terminals tight. Inspect lubrication before operating the actuator after a long storage period.

Related products and ordering notes for L120-10

Other L120 sizes, V, SR, WG and HBC gearboxes, and replacement control components are quoted separately from the L120-10. For a quotation please state the valve type, required torque or thrust, stroke time, supply voltage and frequency, enclosure or hazardous area rating and the control package. For a replacement, send the order number and serial number from the existing nameplate, because the manufacturer needs them for all inquiries and orders.

L120-10 quick answers

The L120-10 provides 100 ft-lb of torque and 10,000 lb of thrust at 12-250 rpm on 60 Hz, weighs about 90 lb (41 kg) with a standard compartment and mounts on MSS FA-10 / ISO F-10. The questions below add detail on controls, drives and ordering.

Documents and quotation

The manufacturer brochure for the L120 series is attached to this page as the datasheet for the L120-10. To request a quotation, send the part number L120-10 with the quantity, supply data and delivery location, and the team will reply with availability and lead time. No prices are published here.

Datasheets & Documents
  • PDF Datasheet Flowserve Limitorque L120-10 Electric Valve Actuator Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Flowserve is the American flow control company for pumps, valves, mechanical seals and valve automation, known through brands such as Durco, Worthington, Byron Jackson, Valtek, Limitorque, Worcester, Logix and Argus. It was formed on 22 July 1997 by the merger of equals of Durco International and BW/IP, whose heritage reaches back to Simpson & Thompson (1790) and Byron Jackson (1872). Flowserve Corporation is headquartered in Irving, Texas, and listed on the New York Stock Exchange.

Seven Star LLC sources and supplies Flowserve pumps, seals, control valves, ball valves, actuators and positioners for process plants in Oman, working from the nameplate data and the manufacturer's documentation.

Flowserve company profile

Formed 22 July 1997, merger of Durco International and BW/IP
Heritage companies Simpson & Thompson, later Worthington Simpson (1790); Byron Jackson (1872); Duriron foundry, later Durco (1912)
Headquarters Irving, Texas, USA
Ownership Flowserve Corporation, public company (NYSE: FLS)
Product families API and ANSI process pumps, Durco and Worcester ball and plug valves, Durco TX3 triple-offset and Valtek butterfly and globe control valves, Limitorque electric actuators, Logix positioners, mechanical seals

Milestones

  • 1790: Thomas Simpson founds Simpson & Thompson, a predecessor of Worthington Simpson pumps.
  • 1872: Byron Jackson is founded, a root of BW/IP.
  • 1912: The Duriron foundry, later Durco, is launched.
  • 1997: Durco International and BW/IP merge on 22 July to form Flowserve, listed on the NYSE as FLS.

Flowserve product families listed here

Flowserve pumps on this page are the Durco Mark 3 ANSI process pump and the ECPJ vertical sump pump built to API 610 type VS4. Sealing products are the ISC2 cartridge mechanical seal to API 682 and DuraClear barrier fluid for dual seal systems. Flowserve valves include the Valtek Mark One globe control valve, Argus floating and trunnion-mounted ball valves (EK71, FK79, FK76M) and Durco Microfinish ball valves. Automation is covered by Limitorque MX and L120 multi-turn electric actuators, the Rotadisk RD and RDF pneumatic actuator and the Logix 3800 digital positioner.

Where Flowserve equipment is used

Mark 3 pumps handle acids, caustic, solvents and utilities in chemical and petrochemical units. VS4 sump pumps drain pits and collection tanks. Valtek control valves and Argus ball valves are found in refining, gas processing, power and desalination, and Limitorque actuators operate gate and globe valves on pipelines, tank farms and water networks across the GCC.

Flowserve products we list

Family Examples
Ball Valves Argus EK71 End-Entry Floating Ball Valve, Argus FK76M Trunnion Mounted Ball Valve, Argus FK79 Floating Ball Valve, Durco Microfinish Ball Valves, Worcester Series 44 Three-Piece Ball Valve
Pumps DS-4614-5-F DuraClear Barrier Fluid, Durco Mark 3 ANSI Process Pump, ECPJ 25-200-R API 610 VS4 Vertical Sump Pump, ISC2 API 682 Cartridge Mechanical Seal
Control Valves Valtek Mark 100 Ultra-Capacity Globe Control, Valtek MaxFlo 4 Eccentric Rotary Plug Control, Valtek Valdisk High-Performance Butterfly, Valtek Mark One Globe Control Valve
Valve Actuators Limitorque L120 Multi-Turn Electric Actuator, Rotadisk RD and RDF Pneumatic Actuator, Limitorque MX Multi-Turn Actuator
Butterfly Valves Durco TX3 Triple Offset Butterfly Valve
Valve Positioners Logix 3800 Digital Positioner

Ordering Flowserve parts: what we need

The serial number on the nameplate is the key to Flowserve records for a pump, valve or actuator. Please add the following by product type:

  • Pumps: size and model, impeller diameter, materials, seal arrangement, and the part name and item number from the sectional drawing
  • Mechanical seals: seal type and size, drawing or part number, materials code, pumped fluid and flush plan
  • Valves: size, pressure class, body and trim materials, end connections, and the actuator and positioner model
  • Limitorque actuators: unit size, order and serial number, supply voltage, wiring diagram number

Facts checked against Flowserve's SEC filings and published company histories, October 2026.

FAQ

Questions about the Flowserve Limitorque L120-10 Electric Valve Actuator

Answers from our engineering team on installation, compatibility and integration.

01What are the torque and thrust ratings of the L120-10?
The manufacturer brochure gives the L120-10 a maximum torque of 100 ft-lb (136 Nm) and a maximum thrust of 10,000 lb (4,500 kg), with speeds of 12-250 rpm at 60 Hz and 10-210 rpm at 50 Hz.
02What control packages are available for the L120-10?
The L120 series offers NCU with no controls, BIC basic integral controls, Modutronic 20 modulating controls and UEX electronic controls, with Modbus, Foundation Fieldbus, Profibus DP, Profibus PA or DeviceNet network options.
03What mounting base does the L120-10 use?
The brochure lists MSS FA-10 / ISO F-10 for the L120-10, with a pilot of 2.312 in (70 mm) and 4 holes, 3/8-16 x 0.88 in or M10 x 1.5 x 22.4 on a bolt circle of 4.016 in (102 mm). The standard base uses MSS English taps and ISO bases are optional.
04Can the L120-10 operate quarter-turn valves?
Yes. The L120 series can be coupled to a Limitorque WG or HBC worm gearbox for butterfly, ball and plug valves, dampers and flop gates, and to V or SR gearboxes for rising stem valves.
05How do I request a quotation for the L120-10?
Send an RFQ with the part number L120-10, the quantity, the supply voltage and the delivery location. Seven Star LLC will reply with availability and lead time; no price is shown on this page.