Magnet-Schultz D-87700 Solenoid Actuator
Overview
The Magnet-Schultz D-87700 is a solenoid actuator supplied under the Magnet-Schultz part numbering system. Magnet-Schultz GmbH is a manufacturer of electromechanical solenoids and solenoid systems for industrial applications, and the D-87700 identifies a specific actuator configuration from the range. This listing is for the solenoid actuator identified by the D-87700 part number for replacement and spares requirements.
Magnet-Schultz GmbH designs and manufactures solenoids for a wide range of industrial equipment, and the D-87700 is supplied against the original part number. The correct coil voltage and duty must be confirmed against the installed unit before ordering the replacement. Seven Star LLC assists in identifying the exact Magnet-Schultz configuration for the application. The actuator is a serviceable component that is replaced against the original part number during maintenance. The coil voltage and mounting details are confirmed with the equipment owner before supply.
Engineering and Design
Solenoid actuators convert electrical energy into linear or rotary mechanical motion using a magnetic field generated by the coil. The armature is pulled into the coil when the solenoid is energized, producing the actuation force for the connected mechanism. The D-87700 configuration is designed for its specific application, with the coil voltage, duty and force characteristics defined by the Magnet-Schultz design.
When replacing a solenoid, the coil voltage, duty cycle and mechanical interface must match the original installation. The D-87700 part number identifies the complete actuator configuration supplied by Magnet-Schultz, and the mounting and connector details are verified against the original unit before installation. The actuator is wired according to the circuit diagram of the equipment, and operation is checked after installation.
When replacing a solenoid, the coil voltage, duty cycle and mechanical interface must match the original installation. The D-87700 part number identifies the complete actuator configuration supplied by Magnet-Schultz, and the mounting and connector details are verified against the original unit before installation. The actuator is wired according to the circuit diagram of the equipment, and operation is checked after installation. The coil resistance and the actuation stroke are recorded for comparison on the next inspection, and the spares holding follows the equipment maintenance plan. The actuator stroke and the coil resistance are measured at each inspection and recorded for comparison with the next reading. The solenoid is supplied with its inspection certificate, and the part number is confirmed against the equipment records. The replacement solenoid is installed by the equipment maintenance team and checked for correct operation of the connected mechanism. The spare part records are updated with the new serial number. The electrical data of the installed coil is recorded on the equipment tag, and the replacement is matched against that record. The solenoid action is verified by the movement of the connected mechanism after installation. The application record of the equipment identifies the original solenoid part number and the electrical supply of the circuit. The replacement part is checked against these records before the maintenance work is started. The maintenance log records the replacement details.
Key Features
- Solenoid actuator from the Magnet-Schultz range
- Identified by the D-87700 part number
- Electromechanical actuation for industrial equipment
- Replacement for installed Magnet-Schultz units
- Coil and armature assembly configuration
- Verified against the original part number
Applications
Magnet-Schultz solenoids are used across industrial equipment for valve actuation, locking mechanisms, switching functions and control applications. The D-87700 actuator suits the equipment it was originally supplied for, including industrial machinery and process equipment in the GCC region.
Specifications
| Part number | D-87700 |
| Manufacturer | Magnet-Schultz GmbH |
| Product type | solenoid actuator |
| Application | industrial electromechanical actuation |
| Configuration | defined by the Magnet-Schultz part number |
| Use | replacement and spares for installed equipment |
Why Seven Star LLC
Seven Star LLC supplies Magnet-Schultz solenoids and electromechanical components to industrial maintenance and OEM support programmes across Oman and the GCC. Every part is verified against the original Magnet-Schultz part number before your order is confirmed. Because solenoid actuators like the D-87700 are often specified as part of a matched valve or control assembly, we confirm the coil voltage, duty cycle, and mounting configuration your specific equipment requires before shipment, since a solenoid that looks physically similar but carries a different coil rating can either fail to actuate reliably or overheat under continuous duty.
For OEM support programmes and maintenance teams running equipment with multiple Magnet-Schultz solenoids in service, we help plan spares coverage around your actual duty cycle and failure history, since solenoids used in high-cycle applications wear differently than those used for occasional actuation. Where a specific D-87700 variant is difficult to source, we are transparent about realistic lead times and can help evaluate whether a compatible substitute or a broader review of your actuator specification makes more sense for your application. Reach out with your coil voltage, duty cycle, and mounting details, and our team will confirm the correct solenoid, a realistic delivery timeline, and any compatibility considerations before you commit to an order, so the replacement integrates correctly into your equipment the first time rather than requiring a second attempt and a second, entirely avoidable delay to your maintenance schedule and overall production plan for that week.
Request a Quote for Magnet-Schultz D-87700 Solenoid Actuator
Submit a formal inquiry through our RFQ page with the solenoid part number D-87700, the equipment it is fitted to and the coil voltage of the original unit. We will confirm the correct configuration and respond with a formal quotation. | Inquiry Form
Related Products
Magnet-Schultz is a premier global manufacturer specializing in high-precision electromagnetic actuators, industrial solenoids, shotbolt lock units, and advanced sensor technologies. At Seven Star LLC, we provide Magnet-Schultz’s robust components designed to meet rigorous quality and safety standards across aerospace, automotive, hydraulics, and pneumatics sectors in Oman. Their comprehensive portfolio includes rotary solenoids, holding magnets, and specialized ATEX-certified valve electronics engineered for explosive atmospheres and mission-critical automation systems. By supplying authentic Magnet-Schultz hardware, Seven Star LLC ensures that regional engineering operations achieve exceptional electromechanical efficiency, superior positional accuracy, and long-term mechanical reliability in demanding industrial environments throughout the GCC.
Related products
Reviews
There are no reviews yet.