Brand:

Festo VUVG-L14-M52-MZT-G18-1P3 Solenoid Valve

Description

VUVG-L14-M52-MZT-G18-1P3: Festo 14 mm 5/2-way, single solenoid solenoid valve

The Festo Festo VUVG-L14-M52-MZT-G18-1P3 (Festo part number 574375) is a piloted solenoid valve of the VUVG family with function 5/2-way, single solenoid, a valve size of 14 mm, G1/8 working ports and a 24 V DC coil. Its standard nominal flow is 700 l/min to 780 l/min. Seven Star LLC supplies the Festo VUVG-L14-M52-MZT-G18-1P3 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

What the VUVG-L14-M52-MZT-G18-1P3 type code tells you

The first elements of the code can be verified directly against the datasheet:

  • VUVG: Festo piston-spool solenoid valve family for manifold and single-valve mounting
  • L14: valve body size, 14 mm in the datasheet
  • M52: valve function, listed in the datasheet as 5/2-way, single solenoid
  • G18: port size G1/8

The remaining elements (MZT and 1P3) describe the actuation, electrical and connection options of this exact version. We quote the complete code exactly as printed on the datasheet, and ask for a nameplate photo whenever a replacement is requested, because neighbouring codes differ in operating pressure range or electrical interface.

Festo VUVG-L14-M52-MZT-G18-1P3 technical specifications

Parameter Specification
Manufacturer / part number Festo VUVG-L14-M52-MZT-G18-1P3 (Festo part number 574375)
Product type Solenoid valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Valve size 14 mm
Standard nominal ow rate (standardised to DIN 1343) 700 l/min to 780 l/min
pneumatic working port G1/8
Operating voltage 24 V DC
Operating pressure -0.09 MPa to 0.8 MPa; -0.9 bar to 8 bar
Design Piston gate valve
Type of reset Mechanical spring
Approval RCM; c UL us – Recognised (Oil)
CE mark (see declaration of conformity) To EU EMC Directive; To EU Low Voltage Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity) To UK instructions for EMC; To UK RoHS instructions; To UK regulations for electrical equipment
Degree of protection IP40; IP65; With plug socket
Nominal size 5.6 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting; Non-detenting; Concealed
Type of piloting Piloted
Pilot air supply External
Pilot pressure 0.3 MPa to 0.8 MPa; 3 bar to 8 bar
Suitability for vacuum Yes
Switching time off 40 ms
Switching time on 13 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 700 µs
Max. negative test pulse with 1 signal 900 µs
Characteristic coil data 24 V DC: 1.0 W; 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W
Permissible voltage flfluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Restrictions for environmental and media temperature -5 – 50 °C; Without holding current reduction
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14 Class 5 according to ISO 14644-1
Media temperature -5 °C to 60 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C to 60 °C
Product weight 70 g
Electrical connection Via electrical sub-base
Type of mounting Either: On manifold rail; With through-hole
Pilot air port 12/14 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Note on materials RoHS compliant
Material seals HNBR; NBR
Material housing Wrought aluminium alloy

How the VUVG-L14-M52-MZT-G18-1P3 switches

A small solenoid pilot stage uses the pilot air to move a piston spool, which connects the working ports to supply and exhaust. The datasheet describes the VUVG-L14-M52-MZT-G18-1P3 as a piston gate valve with soft sealing, pilot air supplied externally and a pilot pressure of 3 bar to 8 bar. With a single solenoid the spool returns by mechanical spring when the coil is de-energised; the switching time is 13 ms on and 40 ms off. The datasheet states suitability for vacuum, so the valve can also be used on vacuum circuits within the pressure range given. The coil data given is 24 V DC: 1.0 W; 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W; operating voltage 24 V DC with permissible voltage fluctuations of +/-10%.

Flow, pressure and response data for sizing the VUVG-L14-M52-MZT-G18-1P3

Flow of 700 l/min to 780 l/min (standard nominal flow rate, DIN 1343) and a nominal size of 5.6 mm define how large a cylinder or what tube length this valve can supply at a useful speed. The operating pressure range is -0.9 bar to 8 bar; the pilot pressure range of 3 bar to 8 bar must be respected, particularly with external pilot supply. Ambient and media temperature limits are -5 °C to 60 °C, protection degree IP40; IP65; With plug socket, product weight 70 g. Use these numbers to match the valve to the cylinder: a larger bore needs higher flow, and the long tubes between valve and cylinder reduce effective flow.

Where the VUVG-L14-M52-MZT-G18-1P3 fits: related Festo valves

The VUVG range is offered in 10, 14 and 18 mm sizes with several function codes. Related codes in this catalogue include VUVG-L14-M52-MZT-G18-1P3, VUVG-L14-M52-AT-G18-1P3, VUVG-L18-M52-MT-G14-1P3, VUVG-L14-P53E-T-G18-1P3, VUVG-L14-T32U-MT-G18-1P3 and VUVG-L18-B52-ZT-G14-1P3. The datasheet lists mounting on a manifold rail or by through-hole, with electrical connection via the sub-base; matching sub-base, cable and silencer parts are ordered separately.

Part number Function Size Flow Port Pressure (bar)
VUVG-L14-M52-MZT-G18-1P3 5/2-way, single solenoid 14 mm 700 l/min to 780 l/min G1/8 -0.9 bar to 8 bar
VUVG-L14-M52-AT-G18-1P3 5/2-way, single solenoid 14 mm 700 l/min to 780 l/min G1/8 2.5 bar to 8 bar
VUVG-L18-M52-MT-G14-1P3 5/2-way, single solenoid 18 mm 1300 l/min G1/4 3 bar to 8 bar
VUVG-L14-P53E-T-G18-1P3 5/3 exhausted 14 mm 560 l/min G1/8 3 bar to 8 bar
VUVG-L14-T32U-MT-G18-1P3 2×3/2 open monostable 14 mm 480 l/min to 500 l/min G1/8 3 bar to 8 bar
VUVG-L18-B52-ZT-G14-1P3 5/2-way, double solenoid 18 mm 1380 l/min G1/4 -0.9 bar to 10 bar

Selection and ordering checklist for VUVG-L14-M52-MZT-G18-1P3

Choose this when one fail-safe return position is wanted on a double-acting cylinder.

  • Function: 5/2-way, single solenoid; confirm that the safe state on loss of power matches your circuit.
  • Size and flow: 14 mm, 700 l/min to 780 l/min; compare with the cylinder size and required speed.
  • Ports: G1/8; confirm fittings and silencers.
  • Voltage: 24 V DC; check the control system output current against the coil data.
  • Pressure: working range -0.9 bar to 8 bar; pilot range 3 bar to 8 bar, and the pilot supply is external.
  • Mounting and wiring: manifold rail or through-hole, with the electrical connection through a sub-base; confirm accessories.

Installation, commissioning and maintenance of the VUVG-L14-M52-MZT-G18-1P3

Mount the valve on the matching sub-base or manifold with the supplied seals seated flat, tighten fasteners evenly and connect the supply, working and exhaust ports without twisting the valve body. Wire the coil to a 24 V DC supply with surge suppression if the controller does not include it. Test with the manual override (Detenting; Non-detenting; Concealed) before applying the control signal. Keep the compressed air filtered and dry as required by the datasheet, and decide at commissioning whether the system will be lubricated, because lubrication, once started, has to continue. During maintenance, check the exhaust silencers for clogging and the coil connector for corrosion.

Typical applications of the VUVG-L14-M52-MZT-G18-1P3 in Oman and the GCC

This 5/2 monostable valve with spring return drives a double-acting cylinder in one direction when energised and returns it when de-energised, a classic scheme for clamps, pushers and grippers. The G1/8 ports and sub-base option make it suitable for small machine control cabinets and valve islands. In Oman and the GCC, valve cabinets face heat and dust, so keep the enclosure ventilated and sealed, and make sure the compressed-air treatment removes moisture so that the valve spool and seals are not damaged by condensate. The ambient range in the table above must be respected inside the cabinet, not only outside it.

Information to send with an RFQ for VUVG-L14-M52-MZT-G18-1P3

  • Full type code VUVG-L14-M52-MZT-G18-1P3 and Festo part number 574375.
  • Quantity and timeframe.
  • Whether sub-bases, manifold rails, cables, silencers or fittings are needed.
  • Control voltage and PLC output type.
  • Cylinder bore and stroke being driven, if sizing support is needed.
  • Delivery destination in Oman or the GCC.

Documents and quotation

A datasheet for the VUVG-L14-M52-MZT-G18-1P3 is attached on this page. It contains the technical data reproduced above and should be checked for any limit that applies to your installation.

To request a quotation, send the part number VUVG-L14-M52-MZT-G18-1P3, the quantity and the delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Datasheets & Documents
  • PDF Datasheet Festo VUVG-L14-M52-MZT-G18-1P3 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo VUVG-L14-M52-MZT-G18-1P3 Solenoid Valve

Answers from our engineering team on installation, compatibility and integration.

01What valve function does the VUVG-L14-M52-MZT-G18-1P3 have?
The datasheet lists the function as 5/2-way, single solenoid with a valve size of 14 mm and G1/8 working ports.
02What supply voltage does the VUVG-L14-M52-MZT-G18-1P3 need?
It operates on 24 V DC. The coil data is 24 V DC: 1.0 W; 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W, so check the output rating of the controller.
03What flow does the VUVG-L14-M52-MZT-G18-1P3 deliver?
The standard nominal flow rate according to DIN 1343 is 700 l/min to 780 l/min. Use this to check that the valve can supply the cylinder at the required speed.
04What operating and pilot pressure applies to the VUVG-L14-M52-MZT-G18-1P3?
The operating pressure range is -0.9 bar to 8 bar, with a pilot pressure of 3 bar to 8 bar and external pilot air supply, according to the datasheet.
05How is the VUVG-L14-M52-MZT-G18-1P3 mounted and connected electrically?
The datasheet lists mounting on a manifold rail or by through-hole, with the electrical connection via the electrical sub-base. The sub-base and cables are separate items to specify when ordering.