Brand:

ifm IE5352 Inductive Sensor M8, 5 mm, 3-/2-Wire, Cable+M12

Description

ifm IE5352 Inductive Sensor M8, 5 mm, 3-/2-Wire, Cable+M12

The ifm IE5352 is a very short inductive sensor in an M8 x 1 brass housing, 36 mm long, with a sensing range of 5 mm. It is non-flush mountable, which is the reason for the longer range from such a small body, and it can be operated as a three-wire or two-wire device, reducing stock for different input types. The output is normally open at 700 Hz and 100 mA.

A 0.3 m PVC cable with an M12 connector with four contacts is fitted, the ambient range is 0 to 60 degrees Celsius and the protection is IP67. Seven Star LLC supplies the IE5352 in Oman and the GCC as an independent supplier in Muscat.

IE5352 technical specifications

The table lists the values published by the manufacturer for the IE5352. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / IE5352
Sensing range [mm] 5
Thread designation M8 x 1
Dimensions [mm] M8 x 1 / L = 36
Mounting non-flush mountable
Real sensing range Sr [mm] 5 ± 10 %
Operating distance [mm] 0 to 4.05
Hysteresis [% of Sr] 1 to 15
Operating voltage [V] 10 to 30 DC
Current consumption [mA] < 10 (only in 3-wire operation)
Electrical design PNP/NPN
Output function normally open
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 700
Ambient temperature [°C] 0 to 60
Protection IP 67
Weight [g] 30.5
Materials housing: brass white bronze coated; sensing face: PBT orange; lock nuts: brass
Connector 1 x M12; coding: A; Contacts: 4; Locking: rotatable
Cable 0.3 m, PVC, black, Ø 3.4 mm; 3 x 0.14 mm²
MTTF [years] 2988

How the IE5352 works

An inductive proximity sensor such as the IE5352 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.

Where the IE5352 fits and related parts

The IE5352 is the smallest sensor in this family. Its sibling IFS204 gives 4 mm in M12 but flush; the IE5352 gives 5 mm in M8 by being non-flush, so a free zone around the sensing face is mandatory. Use it where only a few millimetres of space are available.

Selection and ordering checklist for the IE5352

Work through the points below before you confirm the order, so that the IE5352 you receive is the one your machine or plant needs.

  • Thread M8 x 1, length 36 mm
  • Non-flush: free zone around the sensing face
  • Decide on two-wire or three-wire operation
  • Minimum load current 2 mA in two-wire mode
  • Cable 0.3 m with M12 plug

The manufacturer lists this article under the type designation Inductive sensor, IEBC005-ASKG/0,3M/US. The article number IE5352 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.

Tighten the lock nuts only to the stated limits (1.5 Nm for A = 5 mm and 2 Nm for B). Do not mount metal into the free zone of the sensing face, otherwise the sensor may remain switched on. In two-wire mode the leakage current of 0.5 mA applies.

Typical applications in Oman and the GCC

Small cylinders, grippers, clamps and compact machinery. In Oman and the GCC, it is used in small automation equipment where space is limited.

Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.

IE5352 compared with related ifm types

The table places the IE5352 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
IG5593 M18 flush, 5 mm, 2-wire, 10-55 V DC, cable Related type
IFS204 M12 flush, 4 mm, brass, plug Related type
IFT203 M12 flush, 4 mm, stainless, IP69K Related type
IGS232 M18 flush, 8 mm, -40 to 85 C, IP69K Related type
IIS204 M30 flush, 15 mm, brass Related type
IE5352 M8 non-flush, 5 mm, 0.3 m cable + M12 This page

Information to send with an RFQ for the IE5352

To prepare an accurate offer for the IE5352, please include the following with your enquiry:

  • Thread size and body length required
  • Sensing range and the target material
  • Flush or non-flush mounting
  • Output wiring and connector or cable length
  • Quantity and delivery location

Documents and quotation

The official ifm data sheet for the IE5352 (document IE5352-01, English, issued 27 May 2026) is attached on this page as a PDF. It sets out the sensing range, the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm Ind Range

Seven Star LLC supplies models from the Ifm Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, CableInductive Proximity SensorsView details
ifm IFS204 Inductive Sensor M12, 4 mm, Brass, M12 PlugInductive Proximity SensorsView details
ifm IFT203 Inductive Sensor M12, 4 mm, Stainless, IP69KInductive Proximity SensorsView details
ifm IGS232 Inductive Sensor M18, 8 mm, -40 to 85 C, IP69KInductive Proximity SensorsView details
ifm IIS204 Inductive Sensor M30, 15 mm, Brass, M12 PlugInductive Proximity SensorsView details
ifm IE5352 Inductive Sensor M8, 5 mm, 3-/2-Wire, Cable+M12Inductive Proximity SensorsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet ifm IE5352 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm IE5352 Inductive Sensor M8, 5 mm, 3-/2-Wire,

Answers from our engineering team on installation, compatibility and integration.

01What is the sensing range of the ifm IE5352?
5 mm, with an operating distance of 0 to 4.05 mm.
02Can the IE5352 be used as a two-wire sensor?
Yes, it can operate as a three-wire or two-wire unit.
03What size is the IE5352?
M8 x 1, 36 mm long, brass. This is the value published by the manufacturer for the IE5352; confirm details before ordering.
04Is the IE5352 flush mountable?
No, it is non-flush mountable. This is the value published by the manufacturer for the IE5352; confirm details before ordering.
05How does the IE5352 connect?
Through a 0.3 m PVC cable ending in an M12 connector with four contacts.