Brand:

ifm IIS204 Inductive Sensor M30, 15 mm, Brass, M12 Plug

Description

ifm IIS204 Inductive Sensor M30, 15 mm, Brass, M12 Plug

The ifm IIS204 is a large-format inductive sensor in a brass M30 x 1.5 housing, 50 mm long, with a long sensing range of 15 mm for flush mounting. The operating distance is 0 to 12.15 mm, the supply is 10 to 30 V DC, and the output carries 100 mA at up to 100 Hz. A long range gives margin for loose bearings, thermal growth and bump-prone applications.

The connection is by M12 plug with three gold-plated contacts, protection is IP67, and the ambient range is -25 to 70 degrees Celsius. Seven Star LLC supplies the IIS204 in Oman and the GCC as an independent supplier.

IIS204 technical specifications

The table lists the values published by the manufacturer for the IIS204. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / IIS204
Sensing range [mm] 15
Thread designation M30 x 1.5
Dimensions [mm] M30 x 1.5 / L = 50
Mounting flush mountable
Real sensing range Sr [mm] 15 ± 10 %
Operating distance [mm] 0 to 12.15
Hysteresis [% of Sr] 3 to 15
Operating voltage [V] 10 to 30 DC
Current consumption [mA] < 10
Electrical design PNP
Output function normally open
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 100
Ambient temperature [°C] -25 to 70
Protection IP 67
Weight [g] 105.5
Materials housing: brass white bronze coated; sensing face: PBT orange; LED window: PEI; lock nuts: brass white bronze coated
Connector 1 x M12; coding: A; Contacts: 3, gold-plated
MTTF [years] 1134

How the IIS204 works

An inductive proximity sensor such as the IIS204 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.

Where the IIS204 fits and related parts

Where the IFS204 (4 mm, M12) and IGS232 (8 mm, M18) trade range for compactness, the IIS204 puts uptime first with 15 mm range. The 100 Hz switching frequency makes it a position sensor for slower movement rather than for fast counting.

Selection and ordering checklist for the IIS204

Work through the points below before you confirm the order, so that the IIS204 you receive is the one your machine or plant needs.

  • Check the thread M30 x 1.5 and 50 mm length
  • Check the 15 mm range and free zone
  • Check the 100 Hz switching frequency suits the application
  • Check the target material correction
  • M12 plug, three pins

The manufacturer lists this article under the type designation Inductive sensor, IIB3015BBPKG/US-104. The article number IIS204 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.

Because of its size, use a robust bracket and keep the distance to metal parts as recommended for flush sensors. Commission by moving the target through the range and watching the LED. Large operating distance reduces collisions with the target in sloppy mechanical setups.

Typical applications in Oman and the GCC

Heavy machines, gates, hoists, large valve and damper position, conveyor edge guides. In Oman and the GCC, the long range works well in dusty or sandy conditions where dirt build-up and mechanical wear are common.

Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.

IIS204 compared with related ifm types

The table places the IIS204 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
IG5593 M18 flush, 5 mm, 2-wire, 10-55 V DC, cable Related type
IFS204 M12 flush, 4 mm, brass, plug Related type
IFT203 M12 flush, 4 mm, stainless, IP69K Related type
IGS232 M18 flush, 8 mm, -40 to 85 C, IP69K Related type
IIS204 M30 flush, 15 mm, brass This page
IE5352 M8 non-flush, 5 mm, 0.3 m cable + M12 Related type

Information to send with an RFQ for the IIS204

To prepare an accurate offer for the IIS204, please include the following with your enquiry:

  • Thread size and body length required
  • Sensing range and the target material
  • Flush or non-flush mounting
  • Output wiring and connector or cable length
  • Quantity and delivery location

Documents and quotation

The official ifm data sheet for the IIS204 (document IIS204-02, English, issued 8 December 2023) is attached on this page as a PDF. It sets out the sensing range, the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm Ind Range

Seven Star LLC supplies models from the Ifm Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, CableInductive Proximity SensorsView details
ifm IFS204 Inductive Sensor M12, 4 mm, Brass, M12 PlugInductive Proximity SensorsView details
ifm IFT203 Inductive Sensor M12, 4 mm, Stainless, IP69KInductive Proximity SensorsView details
ifm IGS232 Inductive Sensor M18, 8 mm, -40 to 85 C, IP69KInductive Proximity SensorsView details
ifm IIS204 Inductive Sensor M30, 15 mm, Brass, M12 PlugInductive Proximity SensorsYou are viewing this model
ifm IE5352 Inductive Sensor M8, 5 mm, 3-/2-Wire, Cable+M12Inductive Proximity SensorsView details
Datasheets & Documents
  • PDF Datasheet ifm IIS204 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm IIS204 Inductive Sensor M30, 15 mm, Brass, M12

Answers from our engineering team on installation, compatibility and integration.

01What is the sensing range of the ifm IIS204?
15 mm, with an operating distance of 0 to 12.15 mm.
02What thread does the IIS204 have?
M30 x 1.5, 50 mm long. This is the value published by the manufacturer for the IIS204; confirm details before ordering.
03What is the switching frequency of the IIS204?
100 Hz. This is the value published by the manufacturer for the IIS204; confirm details before ordering.
04What housing material does the IIS204 have?
Brass, white bronze coated, with a PBT sensing face.
05How does the IIS204 connect?
By an M12 plug with three gold-plated contacts.