Brand:

Omron E3Z-D62 Photoelectric Sensor 1 m diffuse

Description

E3Z-D62 2M photoelectric sensor: what it is and how the code reads

The Omron E3Z-D62 2M is a diffuse-reflective photoelectric sensor from the E3Z compact family, with 1 m (white paper 300 x 300 mm) sensing distance, red light and an NPN open-collector output. Seven Star LLC supplies the E3Z-D62 2M in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

Decoding the code:

  • E3Z is the compact photoelectric sensor with built-in amplifier.
  • D62 identifies the sensing method and range class: diffuse-reflective.
  • In the ordering table, 6x codes are red light with NPN output and 8x codes are infrared light with PNP output.
  • 2M is the pre-wired version with a 2 m cable; connector models use an M8 connector instead.

It offers ten times the reach of the E3Z-D61 and is chosen for general detection of cartons, crates and vehicles that are further from the sensor.

E3Z-D62 2M technical specifications

Parameter Specification
Manufacturer / part number Omron / E3Z-D62 2M
Sensing method diffuse-reflective
Sensing distance 1 m (white paper 300 x 300 mm)
Light source red light
Output NPN open collector, 100 mA max. load, 26.4 VDC max., Light-ON/Dark-ON selectable
Supply voltage 12 to 24 VDC ±10%, ripple 10% max.
Current consumption 30 mA max.
Response time Operate or reset: 1 ms max.
Sensitivity adjustment One-turn adjuster
Ambient illumination (receiver) Incandescent lamp 3,000 lx max.; sunlight 10,000 lx max.
Ambient temperature Operating −25 to 55°C (no icing or condensation); storage −40 to 70°C
Degree of protection IEC IP67
Indicators Operation indicator (orange), stability indicator (green)
Protection circuits Reversed supply polarity, output short-circuit, mutual interference prevention, reversed output polarity
Connection Pre-wired cable, standard length 2 m
Weight approx. 65 g (pre-wired, 2 m)
Case material PBT

No reflector is needed. Data is from the manufacturer E3Z datasheet; check the datasheet for the rated detection object and exact limits.

How the E3Z-D62 detects objects

The E3Z-D62 2M is a diffuse-reflective sensor. In practice, a diffuse-reflective sensor reads light returned from the object surface at up to 1 m.

A built-in amplifier converts the received light level into a switching signal. A one-turn adjuster sets sensitivity, and the orange operation indicator shows output state while the green stability indicator tells you whether the light level is in a safe operating margin. Light-ON or Dark-ON operation is selectable, so the output can switch either when light is received or when it is blocked.

Operation is stable against external light up to the limits in the table, and the reflective models include a function that reduces mutual interference between neighbouring sensors, which matters when several sensors are installed in a row.

Where the E3Z-D62 2M fits and related part numbers

The E3Z family is a widely applied compact photoelectric line, with through-beam, retro-reflective, diffuse-reflective, distance-settable and bottle-detection types. Neighbours of the E3Z-D62 2M include E3Z-D61 (100 mm), E3Z-D82 (infrared PNP), E3Z-R61 (reflector).

Each model comes in an NPN version (6x) and a PNP version (8x), and in pre-wired and M8 connector forms. Accessories are ordered separately: reflectors (E39-R1S, E39-R1 and others), mounting brackets (E39-L series), slits and sensor I/O cables (XS3F series). The sensor itself does not include reflectors or brackets.

Selection and ordering checklist for E3Z-D62 2M

  • Confirm the sensing method suits your object: diffuse-reflective.
  • Check the real distance against the rated 1 m (white paper 300 x 300 mm) with margin.
  • Match NPN or PNP to the input card.
  • Decide on pre-wired or connector (M8) version.
  • Order the reflector, bracket or cable accessories you need separately.
  • Check ambient light on the receiver stays inside the datasheet limits.
  • Consider whether red light or infrared light suits the application.

Installation, commissioning and maintenance of the E3Z-D62 2M

Choose it for general-purpose presence detection with one-sided mounting and distances up to about 1 m.

Mount the sensor on a rigid bracket and align the optical axis; the mechanical and optical axes of the E3Z are matched within about ±2.5° on the long-range models, so alignment is simple. Set sensitivity with the one-turn adjuster until the stability indicator is lit with the target present and absent, and choose Light-ON or Dark-ON to suit the logic.

Maintenance consists of wiping the lens, checking the cable and bracket, and re-checking sensitivity after a lens clean. In dusty plants clean on a schedule, because deposits on the lens reduce the margin shown by the stability indicator.

Typical applications in Oman and the GCC

In Oman and the GCC, photoelectric sensors work in dusty, sunlit and hot places such as ports, cement plants, water treatment works and logistics yards. The IP67 housing of the E3Z-D62 2M, together with resistance to ambient light, supports use in these conditions, though direct strong sunlight at the receiver should be shaded.

  • Detecting cartons and crates at the start and end of a roller conveyor.
  • Presence detection of vehicles or trolleys at a bay at about one metre.
  • Presence checks on bins and hoppers where an object surface is visible.

E3Z family comparison

Model (2 m cable) Method Distance Light Output
E3Z-T61 Through-beam 15 m Red NPN
E3Z-T62 Through-beam 30 m Red NPN
E3Z-R61 Retro-reflective, MSR 4 m with E39-R1S Red NPN
E3Z-D61 Diffuse 100 mm Red NPN
E3Z-D62 Diffuse 1 m Red NPN
E3Z-D82 Diffuse 1 m Infrared PNP
E3Z-L61 Narrow-beam diffuse 90 ± 30 mm Red NPN

Use the table to compare E3Z-D62 2M with its siblings before ordering.

Information to send with an RFQ for E3Z-D62 2M

  • Full part number E3Z-D62 2M and quantity.
  • NPN or PNP input type.
  • Object material, size and distance.
  • Whether reflectors, brackets or cables are also needed.
  • Cable or connector preference.
  • Supply voltage and ambient conditions.

Documents and quotation

The manufacturer datasheet for the E3Z family is attached on this page and covers dimensions, wiring and engineering data for E3Z-D62 2M.

Send the part number, quantity and delivery location in Oman or the GCC and Seven Star LLC will confirm availability and lead time. We are an independent supplier and not affiliated with the manufacturer.

Other Models in the Omron E3z Photoelectric Range

Seven Star LLC supplies models from the Omron E3z Photoelectric range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Omron E3Z-T61 Photoelectric Sensor 15 m through-beamPhotoelectric SensorsView details
Omron E3Z-T62 Photoelectric Sensor 30 m through-beamPhotoelectric SensorsView details
Omron E3Z-R61 Photoelectric Sensor retro-reflectivePhotoelectric SensorsView details
Omron E3Z-D61 Photoelectric Sensor 100 mm diffusePhotoelectric SensorsView details
Omron E3Z-D62 Photoelectric Sensor 1 m diffusePhotoelectric SensorsYou are viewing this model
Omron E3Z-D82 Photoelectric Sensor 1 m diffuse PNPPhotoelectric SensorsView details
Omron E3Z-L61 Photoelectric Sensor narrow-beam diffusePhotoelectric SensorsView details
Datasheets & Documents
  • PDF Datasheet Omron E3Z-D62 2M Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Omron is a Japanese electronics and automation company, founded in 1933 in Osaka by Kazuma Tateisi and now headquartered in Kyoto. Its industrial automation business makes PLCs, I/O, sensors, relays, safety components, motion control and robots. Omron's CJ and NX series controllers and I/O units are widely used in machine building.

Seven Star LLC lists Omron PLC input and output units from the CJ and NX series and supplies them to panel builders and maintenance teams in Oman.

Omron company profile

Founded 1933, Osaka, Japan
Founder Kazuma Tateisi
Headquarters Kyoto, Japan
Business Industrial automation, healthcare, electronic components
Product families CJ1/CJ2 PLCs and I/O units, NX and NJ controllers, NX I/O, E2E proximity sensors, G2R and MY relays

Omron CJ-series and NX-series units listed here

Three I/O units are on this page. The CJ1W-ID211 is a CJ-series 16-point 24 VDC input unit and the CJ1W-OC211 is a CJ-series 16-point relay output unit. The NX-ID5442 is an NX-series 16-point 24 VDC digital input unit for PNP wiring, 12 mm wide with push-in terminals. CJ and NX units belong to different hardware platforms and do not plug into each other's racks.

Omron products we list

Family Examples
PLC & I/O Cards CJ1W-ID211 CJ-Series 16-Point 24 VDC Inp…, CJ1W-OC211 CJ-Series 16-Point Relay Outp…, NX-ID5442 NX-Series 16-Point Digital Inp…

Ordering Omron PLC modules: what we need

Send the complete model number from the front or side label of the unit, including every suffix. If you are replacing a failed card, add the CPU or coupler model it is mounted with, and tell us if the terminal block or connector is needed as well. For obsolete Omron PLC parts we check which successor the manufacturer documents. Requests from other GCC countries are handled the same way.

Facts checked against Omron's published company history, October 2026.

FAQ

Questions about the Omron E3Z-D62 Photoelectric Sensor 1 m diffuse

Answers from our engineering team on installation, compatibility and integration.

01What is the sensing distance of the E3Z-D62 2M?
The rated sensing distance is 1 m (white paper 300 x 300 mm) for the diffuse-reflective method. Always confirm the distance on the real object and keep margin, because colour, gloss and size change the result.
02Is a reflector included with the E3Z-D62 2M?
No reflector is needed. Mounting brackets are not included with any E3Z sensor and must be ordered separately.
03Does the E3Z-D62 2M have an NPN or PNP output?
It has an NPN open-collector output rated 100 mA at up to 26.4 VDC. The 6x series is the NPN red-light range; the PNP equivalent is in the 8x series.
04What supply does the E3Z-D62 2M need?
It needs 12 to 24 VDC ±10% with 10% maximum ripple. Current consumption is 30 mA max..
05What is the protection class of the E3Z-D62 2M?
The housing is rated IEC IP67. The ambient operating range is −25 to 55°C without icing or condensation, and the receiver tolerates up to 10,000 lx of sunlight.