- Automation & ControlView all 2,221 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Industrial Computers
- Servo Drives
- Machine Vision
- Automation Software
- Robotics
Brand: Omron
Omron S8VS-03024 24 VDC 1.3 A 30 W DIN-Rail Power Supply
Description
S8VS-03024: compact 30 W 24 V supply, UL Class 2 output
The Omron S8VS-03024 is a 30 W, 24 VDC, 1.3 A switch mode power supply for DIN-rail mounting. It is one of the smaller ratings in the S8VS range and its output conforms to UL Class 2, which helps in panels where low-energy circuits are required. Seven Star LLC supplies the S8VS-03024 in Oman and the GCC as an independent supplier in Muscat, and the sections below decode the number and explain the points to settle before ordering.
- S8VS is the switch mode power supply series with 15 to 480 W ratings.
- 030 means a 30 W power rating.
- 24 means 24 VDC output (5 V and 12 V models exist at this rating).
- No letter after the voltage means no indication monitor, and no S or F means a screw terminal block.
The 30 W model is built for small control loads and is a straightforward upgrade for older panels that need a clean 24 V rail with a Class 2 limited output.
S8VS-03024 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Omron S8VS-03024 |
| Input voltage | 100 to 240 VAC (allowable 85 to 264 VAC) or 80 to 370 VDC; safety standards apply at 100 to 240 VAC |
| Rated output | 24 VDC, 1.3 A (30 W) |
| Output voltage adjustment | −10% to +15% with V.ADJ |
| Efficiency | 85% typ. at 100 VAC; 86% typ. at 200 VAC |
| Input current | 0.9 A max. (0.66 A typ.) at 100 VAC; 0.6 A max. (0.4 A typ.) at 200 VAC |
| Inrush current | 17.5 A max. (14 A typ.) at 100 VAC; 35 A max. (28 A typ.) at 200 VAC |
| Ripple noise voltage (rated I/O) | 150 mV max. |
| Startup time | 560 ms typ. at 100 VAC |
| Leakage current | 0.5 mA max. at 100 VAC; 1.0 mA max. at 200 VAC |
| Class 2 | Yes; 15 W, 30 W and 60 W models conform to Class 2 output standards (UL 1310) |
| Series / parallel operation | Parallel operation not possible (backup operation possible with an external diode) |
| Output indicator | Green LED |
| Storage temperature | −25 to 65°C |
| Operating humidity | 25% to 85% (storage 25% to 90%) |
| Operating temperature | See derating curve in the datasheet; no icing or condensation |
| Weight | 180 g max. |
Values come from the Omron S8VS datasheet. The datasheet gives the range for compliance with EC directives and safety standards as 100 to 240 VAC (85 to 264 VAC); 80 to 370 VDC input is allowed but outside that compliance statement.
How S8VS-03024 works and how it protects the load
Mains is rectified, chopped at high frequency and passed through an isolating transformer to give a regulated 24 V output. The wide input accepts both 100 V and 230 V systems, so the same unit serves different regions.
The unit includes overload and overvoltage protection. Because the 30 W models have no output voltage display, the green output LED is the only status indication. If a display or alarm output is needed, move to a 60 W or higher model with the A or B monitor suffix.
Where S8VS-03024 fits: model code, variants and related parts
The S8VS-03024 is the 24 V member of the 30 W group, beside the 5 V S8VS-03005 (20 W capacity) and 12 V S8VS-03012. For higher current the 60 W S8VS-06024 uses the same series with an optional screwless terminal block.
| Code letter | Meaning in the model number |
|---|---|
| None | Standard model without indication monitor |
| A | Indication monitor with maintenance forecast |
| B | Indication monitor with total run time |
| BE | Monitor with total run time, no alarm output |
| P | Alarm output sourcing (collector COM); none = sinking (emitter COM) |
| S | Conforms to UL Class 2 output (90 W models only) |
| F | Screwless terminal block; none = screw terminal block |
Related product named in the datasheet is the S8V-NF noise filter. The datasheet also states that estimates can be provided for coatings and other specifications not listed, so ask early if your site needs protection against corrosive air.
Selection and ordering checklist for S8VS-03024
Confirm these points before requesting a quotation for S8VS-03024.
- Sum the 24 V loads; keep total below 1.3 A.
- Check mains range and DC if used.
- Check inrush of up to 35 A at 200 VAC against the upstream breaker.
- Decide if UL Class 2 is a requirement for the panel.
- Check derating at the panel temperature.
- Consider a coating request for corrosive sites.
Installation, commissioning and maintenance of S8VS-03024
Clip the S8VS-03024 on a DIN rail, connect AC input and PE and the 24 V output with screw terminals, and verify the output with a meter.
- Tighten screw terminals to the torque in the datasheet.
- Adjust V.ADJ only when needed.
- Leave free space around the case for convection.
- Check the LED after power-up.
- Plan preventive replacement for critical panels.
Typical S8VS-03024 applications in Oman and the GCC
A 30 W supply suits small instrument cabinets, remote I/O, signal conditioners, compact PLCs and sensor groups. In Oman and the GCC it is found in telemetry panels, small pump controllers and building automation boxes.
Smaller supplies run cooler, which helps in outdoor cabinets at high ambient temperature. The Class 2 output also simplifies wiring rules in some panel standards.
S8VS family compared with S8VS-03024
The S8VS series covers eight power ratings. The table below lists the 24 V standard models and their variants as given in the ordering section of the datasheet.
| Power | Standard model (24 V) | Output current | Variants in datasheet |
|---|---|---|---|
| 15 W | S8VS-01524 (also 5 V and 12 V) | 0.65 A | Screw terminal only |
| 30 W | S8VS-03024 (also 5 V and 12 V) | 1.3 A | Screw terminal only |
| 60 W | S8VS-06024 | 2.5 A | -F screwless; A and B monitor versions |
| 90 W | S8VS-09024 / 09024S | 3.75 A | -F; A, B, BE monitor versions; S = UL Class 2 |
| 120 W | S8VS-12024 | 5 A | -F; A, B, BE monitor versions |
| 180 W | S8VS-18024 | 7.5 A | -F; A, B, BE monitor versions |
| 240 W | S8VS-24024 | 10 A | -F; A, B, BE monitor versions |
| 480 W | S8VS-48024 | 20 A (peak 30 A) | -F; A and B monitor versions |
Information to send with an RFQ for S8VS-03024
- Part number S8VS-03024 and quantity.
- Mains voltage and frequency.
- Total load.
- Ambient temperature.
- Coating requirement.
- Delivery location.
Documents and quotation
A datasheet for the S8VS series is attached on this page, including the model legend, ordering tables, derating curves, dimensions and safety precautions for S8VS-03024.
Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer. Send the part number S8VS-03024 and the quantity, and we will confirm availability and lead time for Oman and the GCC.
Other Models in the Omron S8vs Power Supplies Range
Seven Star LLC supplies models from the Omron S8vs Power Supplies range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Omron S8VS-03024 24 VDC 1.3 A 30 W DIN-Rail Power Supply | Power Modules | You are viewing this model |
| Omron S8VS-06024 24 VDC 2.5 A 60 W DIN-Rail Power Supply | Power Modules | View details |
| Omron S8VS-12024 24 VDC 5 A 120 W DIN-Rail Power Supply | Power Modules | View details |
| Omron S8VS-18024 24 VDC 7.5 A 180 W DIN-Rail Power Supply | Power Modules | View details |
Datasheets & Documents
- Datasheet Omron S8VS-03024 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Omron is a Japanese electronics and automation company, founded in 1933 in Osaka by Kazuma Tateisi and now headquartered in Kyoto. Its industrial automation business makes PLCs, I/O, sensors, relays, safety components, motion control and robots. Omron's CJ and NX series controllers and I/O units are widely used in machine building.
Seven Star LLC lists Omron PLC input and output units from the CJ and NX series and supplies them to panel builders and maintenance teams in Oman.
Omron company profile
| Founded | 1933, Osaka, Japan |
|---|---|
| Founder | Kazuma Tateisi |
| Headquarters | Kyoto, Japan |
| Business | Industrial automation, healthcare, electronic components |
| Product families | CJ1/CJ2 PLCs and I/O units, NX and NJ controllers, NX I/O, E2E proximity sensors, G2R and MY relays |
Omron CJ-series and NX-series units listed here
Three I/O units are on this page. The CJ1W-ID211 is a CJ-series 16-point 24 VDC input unit and the CJ1W-OC211 is a CJ-series 16-point relay output unit. The NX-ID5442 is an NX-series 16-point 24 VDC digital input unit for PNP wiring, 12 mm wide with push-in terminals. CJ and NX units belong to different hardware platforms and do not plug into each other's racks.
Omron products we list
| Family | Examples |
|---|---|
| PLC & I/O Cards | CJ1W-ID211 CJ-Series 16-Point 24 VDC Inp…, CJ1W-OC211 CJ-Series 16-Point Relay Outp…, NX-ID5442 NX-Series 16-Point Digital Inp… |
Ordering Omron PLC modules: what we need
Send the complete model number from the front or side label of the unit, including every suffix. If you are replacing a failed card, add the CPU or coupler model it is mounted with, and tell us if the terminal block or connector is needed as well. For obsolete Omron PLC parts we check which successor the manufacturer documents. Requests from other GCC countries are handled the same way.
Facts checked against Omron's published company history, October 2026.
FAQ
Questions about the Omron S8VS-03024 24 VDC 1.3 A 30 W DIN-Rail Power
Answers from our engineering team on installation, compatibility and integration.
01What is the output of S8VS-03024?
24 VDC at 1.3 A (30 W) with output voltage adjustable by −10% to +15% using V.ADJ.
02Is S8VS-03024 UL Class 2?
The datasheet states that 15 W, 30 W and 60 W models conform to Class 2 output standards per UL 1310.
03What efficiency does S8VS-03024 have?
Typical efficiency is 85% at 100 VAC input and 86% at 200 VAC input.
04What ripple does S8VS-03024 have?
Ripple noise voltage is 150 mV max. at rated input and output.
05Can S8VS-03024 be paralleled?
Parallel operation is not possible, although backup operation is possible with an external diode.


















Reviews
There are no reviews yet.