Omron S8VK-G06024 24 VDC 2.5 A 60 W DIN-Rail Power Supply

S8VK-G06024: 60 W workhorse 24 V supply for control panels

The Omron S8VK-G06024 is a 60 W, 24 VDC, 2.5 A DIN-rail power supply and one of the most common ratings for small and medium control panels. It offers 88% typical efficiency and a 3 A Power Boost rating. Seven Star LLC supplies the S8VK-G06024 in Oman and the GCC as an independent supplier in Muscat. The sections below decode the code and explain the selection factors.

• S8VK is the compact switch mode power supply series.
• G means single-phase wide-range input, with DC input possible.
• 060 means a 60 W rating.
• 24 means 24 VDC output.
• Blank option means the standard model; a 400 suffix would indicate a coated model.

At 60 W the supply can feed a PLC rack with I/O, a few sensors, small HMIs and relays, while staying slim at 260 g.

S8VK-G06024 technical specifications

Values are from the Omron S8VK-G datasheet. Ripple and noise is 50 mVp-p max. for the 24 V, 60 W model, lower than the 150 mVp-p of the 12 V version.

How S8VK-G06024 delivers and protects its 24 V output

The S8VK-G06024 converts the wide-range AC or DC input to a regulated, isolated 24 V output with line regulation of 0.4% and load regulation of 0.8%. The output can be trimmed by −10% to +15% to compensate for cable drop.

Boost current of 3 A is available for up to 10 seconds in repeated bursts at no more than 30% duty and an average at or below 2.5 A. This helps with capacitive loads, motor brakes and relay banks. If the load stays above rating, overload protection limits output and resets automatically when the fault clears. Overvoltage protection trips at 130% of the rated voltage and requires an input cycle to restart.

Where S8VK-G06024 fits: wiring, redundancy and related parts

The 60 W model fits between the 30 W S8VK-G03024 and the 120 W S8VK-G12024. The S8VK-G06012 is the 12 V output equivalent. For output branch protection use the S8V-CP circuit protector, and for noisy mains add the S8V-NF noise filter.

Related products named in the datasheet are the S8V-NF noise filter and the S8V-CP DC electronic circuit protector. For redundancy, two units can run in parallel, but the datasheet attaches safety precautions to that mode, so read them before wiring. Series operation of two units, using external diodes, can raise the output voltage for loads that need more than 24 V.

Selection and ordering checklist for S8VK-G06024

Check these points before asking for a quotation on S8VK-G06024.

• Calculate the total 24 V load, including inrush and boost needs; keep continuous load below 2.5 A.
• Confirm mains voltage and DC alternatives.
• Check breaker selection for 32 A inrush at 230 VAC.
• Consider redundancy: up to two units may be paralleled per the datasheet precautions.
• Check the derating curve at expected cabinet temperature.
• Choose a coated model if the air is corrosive.

Installation, commissioning and maintenance of S8VK-G06024

Mount on DIN rail with space for convection above and below, and tighten the terminals with ferrules fitted. Confirm the green LED and measure the 24 V output at the load.

• Fit a protector or fuse in each output branch.
• Do not stack heat-producing equipment right below the unit.
• Check the voltage drop on long output cables and adjust V.ADJ only if needed.
• Document the output voltage setting.
• Plan replacement per the electrolytic capacitor life guidance.

Typical S8VK-G06024 applications in Oman and the GCC

The S8VK-G06024 is used in packaged machine panels, pump and fan control panels, small switchgear auxiliary supplies and telemetry cabinets. In Oman and the GCC it commonly feeds PLC systems, remote I/O, instruments and signal lights.

In a hot environment the unit is rated from −40 to 70°C with derating. Panels in direct sun should include shading or ventilation, as the derating curve limits the output at high temperature.

S8VK-G family compared with S8VK-G06024

The S8VK-G series spans six power ratings. S8VK-G06024 is one of the 24 V models; the table lists the family from the datasheet ordering section.

Information to send with an RFQ for S8VK-G06024

• Part number S8VK-G06024 and quantity.
• Mains supply details.
• Total 24 V load and peak.
• Whether redundancy is required.
• Ambient temperature and enclosure.
• Delivery location.

Documents and quotation

A datasheet for the S8VK-G series is attached on this page, including the ordering table, derating curves, dimensions and safety precautions for S8VK-G06024.

Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer. Send the part number S8VK-G06024 and the quantity, and we will confirm availability and lead time for Oman and the GCC.