- Automation & ControlView all 2,894 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XB4BW73731M5 Double-Head Pushbutton
Description
XB4BW73731M5: green I / red O double-headed illuminated push-button, 230–240 V AC
The XB4BW73731M5 is a Schneider Electric Harmony XB4 illuminated double-headed push-button: two operators and a lamp in one rectangular body that fits a standard 22 mm hole. The upper head is a flush green button marked I, the lower head is a projecting red button marked O, and a white LED pilot light sits between them. Contacts are 1 NO + 1 NC, and the lamp supply is 230 to 240 V AC at 50/60 Hz. Seven Star LLC supplies the XB4BW73731M5 in Oman and the GCC as an independent supplier based in Muscat.
This is the compact start-stop station of the range. The reading of the code is our own interpretation, not the ordering table: XB4BW7373 describes the green-I and red-O combination with a pilot light, and the suffix M5 sets the 230–240 V AC lamp supply. The sibling XB4BW73731B5 differs in supply voltage only.
Where XB4BW73731M5 is used in Oman and the GCC
A combined start-stop and lamp station saves panel space and wiring, which is why XB4BW73731M5 is used on pump and fan starters, small conveyors, workshop machines and packaged skids. In oil and gas, water and power facilities it appears on local control stations next to the equipment it starts, where heat, dust and washdown rule out cheaper plastic stations. The green I and red O markings follow the common convention and avoid the need for a separate legend plate.
How the two heads of the XB4BW73731M5 work
Both heads are spring return and act on the same 1 NO + 1 NC contact block. The datasheet lists the normally closed contact changing state after 1.5 mm and the normally open contact after 2.6 mm of a 4.3 mm total travel, with forces of 3.5 N and 3.8 N. The green I button is flush, so it is harder to press by accident; the red O button projects, so it is the easier one to find and hit in a hurry. That difference in profile is deliberate and follows the usual start-stop convention.
The datasheet states positive opening for the contact block, which gives the stop function the reassurance of a mechanically forced opening. The wiring of the NO and NC contacts to the start and stop duties, and of the central lamp to a run indication, is a matter for the control schematic. Mechanical life is quoted at 1 million cycles, lower than the 10 million of the single-head illuminated buttons, so allow for the heavier use of a start-stop station in the maintenance plan.
Selection checklist and RFQ information for XB4BW73731M5
Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.
- Part number XB4BW73731M5 and the required quantity.
- The lamp circuit supply, here 230 to 240 V AC at 50/60 Hz.
- The control scheme: which contact starts and which stops, and the lamp function.
- Panel thickness at the hole and the rear clearance, against the body depth.
- The contact load and circuit voltage.
- Any approval needed by the project, compared with the datasheet.
- Delivery location in Oman or the GCC and the time you need.
Mounting and wiring of the XB4BW73731M5
The body fits a 22.5 mm hole. It is 50 mm high, 30 mm wide and 59 mm deep and weighs 0.13 kg, so it is heavier than a single button and benefits from a flat, stiff panel. Terminals are screw clamp, tightened to 0.8 to 1.2 N.m, with up to two 1.5 mm² conductors with cable ends or a single conductor from 0.22 mm² without. Screwdriver heads of Philips, JIS, pozidriv No 1 and flat 4 mm or 5.5 mm are listed.
The unit tolerates a high-pressure washer at 7000000 Pa and 55 °C from 0.1 m, per the datasheet, and the bezel and collar are chromium-plated metal and zamak.
Pilot lamp and supply of the XB4BW73731M5
The central window holds a protected LED with a white light source and integral base. The datasheet lists a rated supply of 230 to 240 V AC at 50/60 Hz, supply limits of 195 to 264 V AC and a current consumption of 14 mA, with a service life of 100000 h at rated voltage and 25 °C. The 230–240 V AC rating connects straight to single-phase mains, phase to neutral, which saves a control transformer on small starters, distribution boards and local stations across the GCC. It is an AC-only lamp circuit and must not be fed from a DC supply.
The lamp is a single indicator for the whole station, so it is usually wired to show run or power on. Because the lamp circuit is separate from the contact block, it can be driven from the controller instead of from the motor starter if that suits the design.
Contact ratings and approvals of the XB4BW73731M5
The contacts are silver alloy. The thermal current is 10 A, the insulation voltage is 600 V and the impulse withstand is 6 kV, with operational ratings of 3 A at 240 V and 6 A at 120 V in AC-15 and 0.27 A at 250 V in DC-13. A 10 A gG cartridge fuse is the stated short-circuit protection. Protection ratings are IP66, IP69K, IP69 with UL type 4X/13 and IK06, and operation is from -40 to 70 °C.
The listed certifications are CSA, LROS (Lloyd’s Register), BV, UL listed, DNV. Accept the XB4BW73731M5 for marine or listed-equipment duty only against the entries in the datasheet for this exact reference.
Technical specifications of the XB4BW73731M5
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XB4BW73731M5 |
| Range | Harmony XB4 |
| Product type | Illuminated double-headed push-button |
| Head shape | Rectangular, 1 flush + 1 projecting + 1 central pilot light |
| Operators | Green flush marked I; red projecting marked O |
| Marking colour | White on green and red caps |
| Bezel / fixing collar | Chromium plated metal / zamak |
| Mounting diameter | 22.5 mm |
| Contacts | 1 NO + 1 NC, slow-break |
| Positive opening | Provided (IEC 60947-5-1 appendix K) |
| Operating travel | 1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel) |
| Operating force | 3.5 N NC changing electrical state / 3.8 N NO changing electrical state |
| Mechanical durability | 1 million cycles |
| Light source | Protected LED, white, integral |
| Rated supply voltage [Us] | 230 to 240 V AC at 50/60 Hz |
| Supply voltage limits | 195 to 264 V AC |
| Current consumption | 14 mA |
| LED service life | 100000 h at rated voltage and 25 °C |
| Thermal current [Ith] | 10 A |
| Rated insulation voltage [Ui] | 600 V, pollution degree 3 |
| Rated impulse withstand [Uimp] | 6 kV |
| Rated operational current [Ie] | 3 A at 240 V, AC-15, A600; 6 A at 120 V, AC-15, A600; 0.1 A at 600 V, DC-13, Q600 |
| Dimensions (H x W x D) | 50 mm × 30 mm × 59 mm |
| Net weight | 0.13 kg |
| Degree of protection | IP66, IP69K, IP69; UL type 4X/13; IK06 |
| Operating / storage temperature | -40 to 70 °C / -40 to 70 °C |
| Certifications | CSA, LROS (Lloyd’s Register), BV, UL listed, DNV |
| Warranty | 18 months |
Documents and quotation
The Schneider Electric datasheet for the XB4BW73731M5 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension and panel cut-out drawings.
To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.
Other Models in the Se Xb4bw Dhead Range
Seven Star LLC supplies models from the Se Xb4bw Dhead range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XB4BW73731B5 Double-Head Pushbutton | Automation Accessories | View details |
| Schneider Electric XB4BW73731M5 Double-Head Pushbutton | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Schneider Electric XB4BW73731M5 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XB4BW73731M5 Double-Head
Answers from our engineering team on installation, compatibility and integration.
01What do the two heads of the XB4BW73731M5 do?
The upper head is a flush green button marked I and the lower is a projecting red button marked O. A white LED pilot light sits between them, and the contacts are 1 NO + 1 NC.
02What lamp supply does the XB4BW73731M5 use?
230 to 240 V AC at 50/60 Hz, with limits of 195 to 264 V AC and a current consumption of 14 mA.
03What is the mechanical life of the XB4BW73731M5?
1 million cycles, according to the datasheet.
04What protection rating does the XB4BW73731M5 list?
IP66, IP69K, IP69, UL type 4X/13 and IK06, with operation from -40 to 70 °C.
05Does Seven Star LLC supply the XB4BW73731M5 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.


















Reviews
There are no reviews yet.