Brand:

LESER Modulate Action Series Safety Valves

Description

Overview

The LESER Modulate Action series is a family of standard spring-loaded safety valves built around a proportional, non-pop opening characteristic rather than the sudden full-lift action used on gas and vapor service valves. Type 431 and Type 433 form the core of the range, sharing a rolled-in or screwed metal seat design that opens gradually and in proportion to the degree of overpressure, which is the defining behavior that makes this series the standard LESER choice for liquid relief duty rather than steam or gas blowdown.

With engineering support in Muscat, Seven Star LLC supplies the complete Modulate Action range with datasheet documentation, materials certification, and technical sizing support. Facility engineers across the region specifying overpressure protection for pump discharge lines, liquid-filled vessels, and hydraulic systems rely on this trusted supply channel to secure genuine LESER hardware with proper regional warranty support.

Operating Principle

A modulate-action safety valve opens in direct proportion to how far system pressure has risen above the set point, rather than snapping immediately to full lift the instant set pressure is reached. As pressure climbs past the set point, the disc lifts progressively further off the seat, releasing just enough liquid to bring the system back toward the set pressure, and then reseats smoothly as pressure falls. This proportional behavior is what liquid applications require: because liquids are effectively incompressible, a full pop-action valve on a liquid line would release a disproportionately large volume the instant it opened, causing pressure spikes, water hammer, and excessive product loss.

The practical consequence for Type 431 and Type 433 is minimal medium loss during a relief event, smoother reseating with less mechanical shock to the seat, and a valve response that closely tracks the actual severity of the overpressure condition rather than overreacting to a minor transient. This makes the Modulate Action series the correct technical choice for pump protection, thermal relief on liquid-filled piping, and any application where an abrupt full-lift discharge would be operationally undesirable or wasteful of process fluid.

Engineering Design of the LESER Modulate Action Series

The standard Type 431/433 configuration uses a rolled-in seat design with both DIN and ASME flange connection options, covering a size range of DN 15 to DN 150 (NPS 1/2 to NPS 6) and set pressures from 0.2 to 40 bar (2.9 to 580.15 psig). Body materials span grey cast iron and nodular cast iron through carbon steel and stainless cast steel, giving specifiers a broad selection matched to the corrosivity and temperature of the liquid being protected, across an overall operating temperature range of -270°C to 450°C.

A dedicated high-pressure variant, Type 431/433 PN 160, uses a screwed seat rather than a rolled-in seat and is built specifically for DN 15 (NPS 1/2) connections at set pressures from 0.3 up to 160 bar (4.35 to 2320.6 psig), extending the series into small-bore, very high-pressure liquid relief duty such as hydraulic system protection and high-pressure pump discharge lines that the standard PN 16–40 range cannot reach. Both configurations carry the same broad international certification base, including CE, VdTÜV, EAC, and UKCA marks alongside multiple ship classification society approvals.

Key Features

The LESER Modulate Action series delivers a consistent set of advantages for liquid-service overpressure protection:

  • Proportional opening in response to overpressure minimizes medium loss compared with pop-action designs.
  • Smooth, gradual reseating reduces mechanical shock and seat wear versus full-lift valves.
  • Standard Type 431/433 covers DN 15–150 at set pressures from 0.2 to 40 bar.
  • Dedicated Type 431/433 PN 160 variant reaches up to 160 bar for high-pressure small-bore liquid lines.
  • Rolled-in seat (standard) or screwed seat (PN 160 variant) options match duty and pressure class.
  • Body material options include grey cast iron, nodular cast iron, carbon steel, and stainless cast steel.
  • Operating temperature range of -270°C to 450°C spans cryogenic through high-temperature liquid service.
  • Broad certification base including CE, VdTÜV, EAC, UKCA, and ship classification approvals.

Industrial Applications

The LESER Modulate Action series is specified wherever the protected medium is a liquid rather than a gas or vapor: centrifugal and positive-displacement pump discharge protection, hydraulic power units, liquid-filled heat exchangers subject to thermal expansion, tank farm transfer lines, and water injection systems in oilfield operations. In the Sultanate of Oman and across the wider GCC, this includes desalination and water transfer infrastructure, oilfield water injection skids, and liquid product handling at the Sohar and Salalah economic zones, where pump overpressure protection needs a valve that will not dump excessive product on every minor pressure transient.

Backed by manufacturer datasheet documentation, Seven Star LLC distributes the Modulate Action range to pump package suppliers, EPC contractors, and plant maintenance teams throughout Oman and the GCC, backing every supply with manufacturer datasheet documentation and sizing support for liquid relief applications. Facility engineers protecting pump discharge lines or high-pressure hydraulic circuits can rely on this trusted supply channel for standard Type 431/433 or the PN 160 high-pressure variant without compromising on traceability.

Technical Specifications

The table below compares the standard and high-pressure configurations of the current Modulate Action range.

Type Size Range Pressure Range Key Feature
Type 431/433 DN 15–DN 150 | NPS 1/2–NPS 6 0.2–40 bar | 2.9–580.15 psig Rolled-in seat, DIN and ASME flange connections
Type 431/433 PN 160 DN 15 | NPS 1/2 0.3–160 bar | 4.35–2320.6 psig Screwed seat for high-pressure small-bore duty

Request a Quote for LESER Modulate Action

Seven Star LLC invites pump package suppliers, EPC contractors, and plant engineers across Oman and the GCC to submit a formal RFQ for the LESER Modulate Action series, Type 431/433 standard or the PN 160 high-pressure variant. Standard sizes are supplied on request with lead time confirmed at quotation, and a technical datasheet download can be provided on request alongside sizing support from our instrumentation and valve engineering division. Working closely with plant engineers in the region, Seven Star LLC supplies manufacturer hardware with the available certification documents and technical support for every Modulate Action valve supplied.

Also available: LESER Critical Service Series Safety Valves

Datasheets & Documents
  • PDF Brochure LESER Modulate Action Series Safety Valves Catalog Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

LESER is the German safety valve manufacturer whose history goes back to 16 March 1818, when Georg Wittmann started a brass foundry in Hamburg. The company built its first safety valve for steam boilers in 1885 and has focused only on safety valves since the 1970s. Its production sites are in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

Seven Star LLC is an independent supplier in Muscat. We list LESER spring-loaded and pilot-operated safety valves and change-over valves, and supply them and their spare parts to refineries, gas plants, boiler houses and process plants in Oman and the GCC.

LESER company profile

Origins 16 March 1818, Hamburg: brass foundry founded by Georg Wittmann
Safety valves First safety valve for steam boilers in 1885; safety valves only since the 1970s
Production Hohenwestedt (Germany), Paithan (India), Tianjin (China)
Product families API, High Performance, Compact Performance, Critical Service, Clean Service, High Pressure, Modulate Action and pilot-operated safety valves, plus change-over valves

Milestones

  • 1818: Georg Wittmann founds a brass foundry in Hamburg on 16 March.
  • 1885: LESER makes its first safety valve for steam boilers.
  • 1970s: The company concentrates on safety valves only.
  • Today: Production in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

LESER products we list

Series Types Typical use
API series Type 526, 526 CC Refinery and petrochemical relief to API 526
High Performance 441/442 DIN, 441/442 ANSI, 444 Steam, gases and liquids in general process and boiler service
Compact Performance 437, 459, 462 Small threaded valves for compressors, vessels and utilities
Critical Service 447, 449 Toxic, corrosive or high-pressure media, and block-body designs
High Pressure 457/458 High-pressure gas and liquid systems
Clean Service 483, 488 Food, pharmaceutical and clean steam
Pilot-operated, Modulate Action 811, 821 Large capacities and operation close to set pressure
Change-over valves 310 Two safety valves in parallel, so one can be serviced while the other protects the system

A spring-loaded safety valve opens when the system pressure overcomes the spring force at the set pressure. A pilot-operated valve uses the system pressure itself to hold the main valve shut, so it stays tight much closer to the set pressure and suits large flows. Sizing follows the required relief capacity from the worst-case scenario. API 526 fixes the flange sizes and orifice letters (D to T), so an API valve with the same orifice can replace one from another maker.

Where LESER safety valves are used

In Oman and the GCC, LESER safety valves protect vessels, heat exchangers, compressors, pumps, steam boilers and pipelines in oil and gas, refining, LNG, petrochemical, power and desalination plants.

Ordering LESER safety valves: what we need

Send the LESER type and article number from the nameplate, or the data sheet with the medium, set pressure, relieving temperature, required capacity, back pressure, inlet and outlet sizes and pressure classes, and the materials. For spare parts, send the serial number of the valve.

Facts checked against LESER company history (200th anniversary, 2018), October 2026.

FAQ

Questions about the LESER Modulate Action Series Safety Valves

Answers from our engineering team on installation, compatibility and integration.

01What is the difference between Type 431/433 standard and Type 431/433 PN 160?
Standard Type 431/433 uses a rolled-in seat and covers DN 15-150 at 0.2-40 bar. The Type 431/433 PN 160 variant uses a screwed seat and is built for DN 15 connections at much higher set pressures up to 160 bar, targeting small-bore, high-pressure liquid relief duty.
02Which type should I choose for pump discharge overpressure protection?
For most pump discharge and general liquid-filled piping protection up to 40 bar, standard Type 431/433 is the correct choice. For high-pressure hydraulic circuits or high-pressure pump discharge lines above 40 bar, the Type 431/433 PN 160 variant should be specified.
03Why use a modulate-action valve instead of a pop-action valve on a liquid system?
Liquids are effectively incompressible, so a full pop-action valve would release a disproportionately large volume the instant it opened, causing pressure spikes, water hammer, and excessive product loss. Modulate Action valves open in proportion to the actual overpressure, minimizing medium loss and mechanical shock.
04What materials and temperature range does the Modulate Action series cover?
Body materials include grey cast iron, nodular cast iron, carbon steel, and stainless cast steel, with an operating temperature range of -270°C to 450°C, covering cryogenic through high-temperature liquid service.
05Is Seven Star LLC an experienced supply partner for LESER products?
Yes. Seven Star LLC is an experienced supplier of LESER safety valves in Oman and the GCC, supplying genuine manufacturer hardware with full certification and technical support.