Brand:

LESER Compact Performance Series – Type 437/459/462 Safety Valves

Description

Overview

The LESER Compact Performance Series is LESER’s line of small-envelope, threaded-connection safety valves built for applications where space is at a premium and connections are typically threaded rather than flanged — hydraulic power units, compressors, thermal relief points, and skid-mounted packages. The series spans the Type 437, Type 459 and its high-pressure derivative the Type 459 HDD, and the soft-seated Type 462 with its own high-pressure derivative the Type 462 HDD, giving specifying engineers a single compact-body family that stretches from moderate industrial pressures to some of the highest set pressures LESER offers in a threaded-connection valve.

Operating Principle

Like the rest of the LESER range, every Compact Performance type is a direct-acting, spring-loaded safety valve: the disc is held closed against the seat by a calibrated spring, and once system pressure overcomes that spring force the disc lifts and vents the medium until pressure drops back to the reseating point. The distinguishing feature of this series is not the lift mechanism but the seat technology used to reach it — Type 459 and Type 459 HDD use a metal-to-metal seat suited to hydraulic oil and general fluid power service at very high pressure, while Type 462 and Type 462 HDD use a soft (elastomer or PTFE-class) seat that gives bubble-tight shutoff closer to the set point, at the cost of a somewhat lower maximum pressure ceiling than the metal-seated HDD variant.

Type 437 sits at the compact, general-purpose end of the family: a small-bore threaded valve rated to very high pressure for its size, commonly used as a component-level protection valve on hydraulic cylinders, accumulator circuits, and small pressure vessels where a full-size flanged safety valve would be oversized for the application. Across the whole series, the small thread-based body means these valves mount directly into a manifold, block, or pipe tee without the flange bolting and gasket work a larger valve would need.

Engineering Design of the LESER Compact Performance Series

Type 437 covers a pressure range of roughly 0.1 to 365 bar on G 3/8–1 or NPT ½–1 threaded connections, making it the widest single pressure span in the family for its connection size. Type 459 covers 0.2 to 250 bar on NPT/NPS ½ to 2 connections with a metal seat, and where a process needs to go beyond that ceiling, the Type 459 HDD extends the same body concept from 250.01 bar up to 850 bar on a slightly narrower NPT/NPS ½–1 connection range, making it one of the highest-pressure-rated compact safety valves LESER builds. Type 462 mirrors the Type 459 envelope (0.5 to 250 bar) but with a soft seat for tighter shutoff, and Type 462 HDD extends that soft-seated line from 250.01 to 350 bar.

All Compact Performance types share a compact spring housing sized to keep the overall valve height low even at the top of each type’s pressure range, which matters directly on hydraulic power units and skids where vertical clearance above a manifold is limited. Because the body platform is common across the metal-seated and soft-seated lines, a fabricator standardizing on this series can switch between Type 459 and Type 462 for the same connection footprint purely based on which seat technology the application calls for, without redesigning the mounting boss.

Key Features

The LESER Compact Performance Series brings the following strengths to space-constrained and high-pressure hydraulic applications:

  • Threaded G and NPT connections from ½ inch to 2 inch mean direct installation into manifolds, blocks, and pipe tees without flange bolting.
  • Type 459 HDD reaches set pressures up to 850 bar, among the highest available in a compact threaded-body safety valve.
  • Type 462 and Type 462 HDD provide soft-seat, bubble-tight shutoff for applications where zero simmer or leakage near set pressure is required.
  • Type 437 offers a wide 0.1–365 bar range in the smallest connection sizes, ideal for component-level cylinder and accumulator protection.
  • Compact spring housings keep overall valve height low for tight clearance installations on hydraulic power units and skids.
  • A shared body platform across metal-seated and soft-seated variants simplifies stocking and standardization for OEMs and integrators.
  • Field-proven LESER spring and disc-guide design carried over from the larger flanged product lines for consistent reseating accuracy.
  • Suitable for hydraulic oil, compressed gas, and general fluid power media across a very broad pressure spectrum.

Industrial Applications

The LESER Compact Performance Series is the natural choice for hydraulic power units, mobile and stationary hydraulic equipment, compressor packages, thermal relief points on closed liquid-filled lines, and any skid-mounted system where a full flanged safety valve cannot physically fit. Machine builders across oil field services, marine and offshore equipment, and general manufacturing in the region rely on this series to protect cylinders, accumulators, and small pressure vessels without adding significant weight or footprint to the assembly.

With fast quotation turnaround and technical support, Seven Star LLC distributes the Compact Performance Series to hydraulic workshops, OEM skid builders, and industrial equipment suppliers across Muscat, the Sohar Freezone, the Salalah Free Zone, and the wider Sultanate of Oman and GCC, ensuring every valve supplied carries part-number traceability, certification, and after-sales technical support from a locally based team.

Technical Specifications

The comparison below sets out each Compact Performance type against its real, verified pressure and connection range:

Type Size Range Pressure Range Seat Type Key Feature
Type 437 G 3/8–1, NPT ½–1 0.1 – 365 bar Metal Widest pressure span for its compact connection size
Type 459 NPT/NPS ½ – 2 0.2 – 250 bar Metal Standard metal-seated compact hydraulic safety valve
Type 459 HDD NPT/NPS ½ – 1 250.01 – 850 bar Metal High-pressure derivative reaching up to 850 bar
Type 462 NPT/NPS ½ – 2 0.5 – 250 bar Soft seat Bubble-tight shutoff for zero-leakage requirements
Type 462 HDD NPT/NPS ½ – 1 250.01 – 350 bar Soft seat High-pressure soft-seated derivative

Request a Quote for LESER Compact Performance

Seven Star LLC invites hydraulic equipment integrators, machine builders, and procurement teams across Oman and the GCC to submit a formal RFQ for the LESER Compact Performance Series, covering Type 437, 459, 459 HDD, 462, and 462 HDD. Full technical datasheets and direct access to the Seven Star LLC instrumentation and valve division are available on request. With engineering support in Muscat, Seven Star LLC supplies every unit on request with manufacturer documentation.

Also available: LESER Type 449 Critical Service Block-Form Safety Valve

Datasheets & Documents
  • PDF Brochure LESER Compact Performance Series 437 Catalog Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

LESER is the German safety valve manufacturer whose history goes back to 16 March 1818, when Georg Wittmann started a brass foundry in Hamburg. The company built its first safety valve for steam boilers in 1885 and has focused only on safety valves since the 1970s. Its production sites are in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

Seven Star LLC is an independent supplier in Muscat. We list LESER spring-loaded and pilot-operated safety valves and change-over valves, and supply them and their spare parts to refineries, gas plants, boiler houses and process plants in Oman and the GCC.

LESER company profile

Origins 16 March 1818, Hamburg: brass foundry founded by Georg Wittmann
Safety valves First safety valve for steam boilers in 1885; safety valves only since the 1970s
Production Hohenwestedt (Germany), Paithan (India), Tianjin (China)
Product families API, High Performance, Compact Performance, Critical Service, Clean Service, High Pressure, Modulate Action and pilot-operated safety valves, plus change-over valves

Milestones

  • 1818: Georg Wittmann founds a brass foundry in Hamburg on 16 March.
  • 1885: LESER makes its first safety valve for steam boilers.
  • 1970s: The company concentrates on safety valves only.
  • Today: Production in Hohenwestedt (Germany), Paithan (India) and Tianjin (China).

LESER products we list

Series Types Typical use
API series Type 526, 526 CC Refinery and petrochemical relief to API 526
High Performance 441/442 DIN, 441/442 ANSI, 444 Steam, gases and liquids in general process and boiler service
Compact Performance 437, 459, 462 Small threaded valves for compressors, vessels and utilities
Critical Service 447, 449 Toxic, corrosive or high-pressure media, and block-body designs
High Pressure 457/458 High-pressure gas and liquid systems
Clean Service 483, 488 Food, pharmaceutical and clean steam
Pilot-operated, Modulate Action 811, 821 Large capacities and operation close to set pressure
Change-over valves 310 Two safety valves in parallel, so one can be serviced while the other protects the system

A spring-loaded safety valve opens when the system pressure overcomes the spring force at the set pressure. A pilot-operated valve uses the system pressure itself to hold the main valve shut, so it stays tight much closer to the set pressure and suits large flows. Sizing follows the required relief capacity from the worst-case scenario. API 526 fixes the flange sizes and orifice letters (D to T), so an API valve with the same orifice can replace one from another maker.

Where LESER safety valves are used

In Oman and the GCC, LESER safety valves protect vessels, heat exchangers, compressors, pumps, steam boilers and pipelines in oil and gas, refining, LNG, petrochemical, power and desalination plants.

Ordering LESER safety valves: what we need

Send the LESER type and article number from the nameplate, or the data sheet with the medium, set pressure, relieving temperature, required capacity, back pressure, inlet and outlet sizes and pressure classes, and the materials. For spare parts, send the serial number of the valve.

Facts checked against LESER company history (200th anniversary, 2018), October 2026.

FAQ

Questions about the LESER Compact Performance Series

Answers from our engineering team on installation, compatibility and integration.

01Which LESER Compact Performance type should I choose for a hydraulic power unit?
For general hydraulic oil protection up to 250 bar, Type 459 (metal seat) or Type 462 (soft seat) are the standard choices depending on whether bubble-tight shutoff is required. For pressures above 250 bar up to 850 bar, the Type 459 HDD or Type 462 HDD derivatives extend the same compact body platform.
02What is the difference between Type 459 and Type 462?
Type 459 uses a metal-to-metal seat suited to general hydraulic and fluid power service, while Type 462 uses a soft seat that gives bubble-tight, zero-leakage shutoff closer to the set point. Both share the same connection sizes and a similar pressure range up to 250 bar.
03What is the maximum pressure available in the Compact Performance Series?
The Type 459 HDD reaches up to 850 bar, making it one of the highest set-pressure ratings available in a compact, threaded-connection LESER safety valve.
04Are Compact Performance valves suitable for space-constrained skids?
Yes. The entire series uses threaded G or NPT connections and a compact spring housing designed to keep overall height low, making it well suited to hydraulic power units, compressor packages, and skids where a flanged safety valve would not fit.
05Is Seven Star LLC an experienced supply partner for LESER products?
Yes. Seven Star LLC is an experienced supplier of LESER safety valves in Oman and the GCC, supplying LESER product with full documentation and local technical support.