Brand:

LongTeng EL8 Carbon Steel Submerged Arc Welding Wire

Description

Overview of LongTeng EL8 Submerged Arc Wire

LongTeng EL8 is a copper-coated carbon steel wire for submerged arc welding (SAW), listed by LongTeng (Jiangsu Longteng Special Steel Group) in its welding materials catalogue against the AWS A5.17 class EL8. In the manufacturer’s listing the wire is paired with the sintered flux SJ301, and the entry also names the 501 flux. Four diameters are shown: 2.5, 3.2, 4.0 and 5.0 mm. The catalogue describes the intended work as high speed welding of steel plate of 420 MPa tensile strength class and as filling (fill-pass) welding.

Seven Star LLC supplies LongTeng welding consumables to fabricators, pressure vessel shops and project contractors in the Sultanate of Oman and the wider GCC, with supply coordination and engineering support from Muscat. This page summarises the figures printed for the grade so that a buyer can compare it with a procedure qualification record before raising a request for quotation.

What the EL8 Designation Means

As general class information, AWS A5.17 covers carbon steel electrodes and fluxes for submerged arc welding. In the designation, the letter after E shows the manganese level: L for low, M for medium and H for high. The digits give the nominal carbon content in hundredths of a percent, and a trailing K shows a silicon-killed wire. Read that way, EL8 is a low-manganese wire with a nominal carbon level near 0.08 percent. That is a general reading of the class name and not a statement of LongTeng’s guarantee. Among the grades printed on the catalogue pages, EL8 is the lowest-manganese entry, which makes it a natural starting point for plain structural joints where strength demands are moderate and a soft, ductile weld deposit is welcome.

How LongTeng EL8 Is Used in the Welding Process

In submerged arc welding a continuous bare wire is fed into a pool of granular flux laid ahead of the arc. The flux melts, shields the weld metal from the atmosphere, shapes the bead and leaves a slag that lifts away after cooling. Because the arc is buried, spatter is minimal and deposition rates are high, which is why the process is chosen for long seams on plate, tank shells and beams. The catalogue ties LongTeng EL8 to sintered (agglomerated) flux, and the combination is described as suitable for fast travel speeds and for filling grooves in multi-pass joints. Sintered fluxes are generally hygroscopic, so as a general practice they are kept dry and redried according to the flux maker’s instructions before use.

Typical practice is to run the wire on direct current with a controlled stick-out, but the correct current, voltage and travel speed for a given joint must come from the welding procedure specification. The catalogue page does not print current or voltage windows for this grade, so none are quoted here.

Key Features of LongTeng EL8

Points taken from the manufacturer’s listing of LongTeng EL8, written out in plain terms:

  • The conformance line reads AWS A5.17 EL8, so the wire is positioned in the low-manganese group of the carbon steel SAW classes.
  • The listed flux pairing is SJ301, with the catalogue also naming 501 in the application text.
  • The typical value for tensile strength is printed as 550 MPa and for yield strength as 450 MPa.
  • Elongation is listed at 26 percent, a comfortable ductility figure for structural work.
  • Three impact results of 116, 108 and 110 J are shown at a test temperature of minus 20 degrees Celsius.
  • Residual elements are reported as low, with nickel at 0.022 percent, chromium at 0.017 percent and copper at 0.113 percent.
  • Wire is offered in 2.5, 3.2, 4.0 and 5.0 mm diameter, covering both thin-plate and heavy-section duty.
  • The stated application is high speed welding of 420 MPa class plate and filling welding.

Industrial Applications in Oman and the GCC

A wire in the EL8 class suits the kind of fabrication that fills workshops around Sohar, Sur and Duqm: storage tank shell courses, structural beams, pipe spools built from plate, and the long straight seams of rolled cylinders. Where plate is of the 420 MPa class, the manufacturer’s own recommendation points to this wire and the SJ301 flux. Heavier fill passes in thick joints are also named in the catalogue entry.

Users of LongTeng EL8 should still qualify the full consumable combination on the actual plate, because the numbers in a catalogue describe a test weld made under the maker’s conditions. Seven Star LLC can pass drawings, plate grades and procedure questions to the manufacturer, and we recommend asking for the batch test certificate when the weld is part of a code-governed job.

Technical Data for LongTeng EL8

The table below reproduces the figures printed for LongTeng EL8 in the manufacturer’s catalogue, labelled as typical values listed by the manufacturer.

Parameter Typical value listed by the manufacturer
Model LongTeng EL8
Conformance AWS A5.17 EL8
Listed flux SJ301 (application text also names 501)
Diameters 2.5, 3.2, 4.0, 5.0 mm
Tensile strength 550 MPa
Yield strength 450 MPa
Elongation 26 %
Impact energy 116, 108, 110 J at -20 °C
Carbon (C) 0.060 %
Manganese (Mn) 0.45 %
Silicon (Si) 0.012 %
Sulphur (S) 0.014 %
Phosphorus (P) 0.020 %
Nickel (Ni) 0.022 %
Chromium (Cr) 0.017 %
Copper (Cu) 0.113 %

Packaging Reference

The catalogue’s package reference pages show coil wire for submerged arc welding in nominal wire weights of 25, 50, 100, 250 and 350 kg, and drum packs of 150, 250 and 350 kg. These are the manufacturer’s reference packages and are not a statement of what is held in stock. Confirm the pack that suits your uncoilers and flux hoppers when you request a quotation, and tell us the plate grade and joint type so the right diameter can be proposed.

Related Items From Seven Star LLC

Fabrication shops often pair wire with power sources and cabling. See the Lincoln Electric Power Wave S500, the ESAB Rebel EMP 285ic and the Lapp OLFLEX Classic 110 flexible control cable in our range, or browse the full submerged arc welding wire category.

How to Order

To request a quotation for LongTeng EL8, send the diameter, quantity, packaging preference and plate grade to the Seven Star LLC supply desk in Muscat. Download the LongTeng EL8 datasheet extract from this page and ask for the manufacturer’s test certificate with your order. Seven Star LLC supplies LongTeng EL8 and passes technical questions on to the manufacturer.

Datasheets & Documents
  • PDF Datasheet LongTeng EL8 / EM12 datasheet (manufacturer catalogue extract) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

LongTeng is a brand of welding wires and electrodes for carbon steel and stainless steel fabrication. Seven Star LLC lists LongTeng welding wires and electrodes by their AWS classification and supplies them to fabrication shops and site contractors in Oman, with the classification on the manufacturer's datasheet checked against the one named in the buyer's welding procedure.

LongTeng wire grades listed here

Among the products on this page, the solid gas-shielded wires are ER70S-3, ER70S-4, ER70S-6 (in copper-coated and copper-free versions) and ER70S-G for carbon steel, followed by the higher strength grades ER80S-G, ER90S-G, ER100S-G and ER110S-G. The submerged arc wires are EL8, EM12, EM12K, EM13K and EH14. In submerged arc welding the wire is only half of the consumable: the weld metal properties come from the wire and flux pair, so the flux has to be named as well.

Ordering LongTeng welding wire: what we need

Send the AWS classification, wire diameter, spool or drum size, total quantity and the shielding gas or flux you intend to use. For the G-suffix grades, where the standard leaves the chemistry to agreement, attach the required chemical and mechanical limits from your procedure. Tell us which lot certificate your quality plan asks for. Projects in the GCC that work to client-approved brand lists should mention that at the inquiry stage.

FAQ

Questions about the LongTeng EL8 Carbon Steel Submerged Arc Welding Wire

Answers from our engineering team on installation, compatibility and integration.

01Which flux does the manufacturer list for LongTeng EL8?
The catalogue lists the sintered flux SJ301 as the reference flux for LongTeng EL8, and the application text also names flux 501. This is the manufacturer's listed pairing; the final wire and flux combination should still be qualified on your own plate and procedure.
02What mechanical values are printed for LongTeng EL8?
The manufacturer lists a typical tensile strength of 550 MPa, yield strength of 450 MPa and elongation of 26 percent, with impact energies of 116, 108 and 110 J at minus 20 degrees Celsius. These are typical values from the catalogue and not a guarantee for every batch, so request the test certificate for code work.
03Which diameters are shown for LongTeng EL8?
The catalogue reference table lists 2.5, 3.2, 4.0 and 5.0 mm. Availability of a specific diameter and pack size is confirmed when you send a request for quotation.
04Is LongTeng EL8 intended for 420 MPa class plate?
The catalogue application text says the wire is used for high speed welding of steel plate of 420 MPa tensile strength and for filling welding. Treat this as the maker's general application note and confirm suitability against your base metal specification and welding procedure.
05Does Seven Star LLC supply LongTeng EL8 in Oman?
Seven Star LLC supplies LongTeng welding consumables to customers in Oman and the GCC and provides engineering support from Muscat. Send your diameter, quantity and plate details through the quotation form, and ask for the manufacturer's test certificate if your job requires one.