Brand:

Festo QSF-1/4-6-B Push-in Fitting

Description

QSF-1/4-6-B: push-in fitting, G1/4 to 6 mm tube

The Festo QSF-1/4-6-B (article 153024) is the push-in fitting with a female G1/4 thread and a 6 mm tubing connection, used to adapt male threaded parts to tube. A push-in fitting joins plastic tubing to a threaded port without tools: the tube is pushed in until it locks and is released by pressing the ring. Seven Star LLC supplies QSF-1/4-6-B in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. The sections below translate the datasheet for selection and enquiry.

Reading the part number against the datasheet:

  • QSF is the push-in fitting family shown on the sheet (push-in fitting).
  • Thread side: Female thread G1/4.
  • Tube side: For tubing outside diameter of 6 mm.
  • Nominal size 5 mm and a pack size of 10 on the datasheet.
  • Release ring colour blue; mounting by external hex SW17.

QSF-1/4-6-B technical specifications

Values below come from the manufacturer data sheet for article 153024.

Parameter Specification
Manufacturer / part number Festo / QSF-1/4-6-B
Article number 153024
Size Standard
Nominal size 5 mm
Tubing insertion depth 17 mm
Type of seal on screwed plug Coating
Mounting position Any
Design Straight design; Push-pull principle
Size of pack 10
Operating pressure complete temperature range -0.095 MPa to 0.6 MPa; -0.95 bar to 6 bar; -13.775 psi to 87 psi
Temperature-dependent operating pressure -0.095 MPa to 1.4 MPa; -0.95 bar to 14 bar; -13.775 psi to 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14 Class 4 according to ISO 14644-1
Ambient temperature -10 °C to 80 °C
Nominal torque 9 Nm
Tolerance for nominal tightening torque ±20%
Product weight 23 g
Type of mounting External hex SW17
Pneumatic connection, port 1 Female thread G1/4
Pneumatic connection, port 2 For tubing outside diameter of 6 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

How the QSF-1/4-6-B push-in connection works

Inside the fitting a stainless steel clamp ring grips the tube wall while a sealing element seals against its outside surface. Pushing the tube past the clamp locks it; pressing the release ring frees it again, so tubing can be changed in seconds. The listed insertion depth of 17 mm ensures the tube reaches the sealing zone.

The pressure window on the datasheet is -0.95 to 6 bar over the complete temperature range and -0.95 to 14 bar at moderate temperature. Check these values against the supply pressure, and remember that tubing, not only the fitting, defines the limit of a real installation.

The operating medium is Compressed air to ISO 8573-1:2010 [7:-:-]; the note allows lubricated operation. Water is also listed: Water: max. 0.6 MPa at max. 50°C.

Where QSF-1/4-6-B fits: compatible and related parts

A fitting like this sits at the end of a tube run on a valve, cylinder, regulator, manifold or sensor port. The thread must match the port exactly, and the tube outside diameter must match the push-in side; the sheet lists Female thread G1/4 and For tubing outside diameter of 6 mm.

Other push-in fittings we handle in this range include QS-V0-G1/4-8, QSR-G1/4-6, QSMK-G1/4-6, QS-1/4-12-I, QSM-G1/8-4, QS-G1/8-6-I, QS-1/4-6-I. They differ in thread, tube size, rotation, sealing and material, so they are not interchangeable without checking the port and tubing.

Selection and ordering checklist for QSF-1/4-6-B

  • Thread: Female thread G1/4; confirm G (parallel) or R (tapered) against the mating port.
  • Tube outside diameter: For tubing outside diameter of 6 mm and the tube material approved for this fitting.
  • Pressure: -0.95 to 6 bar over the full temperature range on the datasheet.
  • Ambient temperature on the sheet: -10 °C to 80 °C.
  • Housing material: Brass, nickel-plated; weight 23 g.
  • Be sure the other part has a male G1/4 thread. The body is held on an external SW17 hex with a nominal torque of 9 Nm.

Installation, commissioning and maintenance of QSF-1/4-6-B

Cut the tube square with a proper tube cutter, push it fully home and give it a light pull to check the lock. The listed nominal tightening torque is 9 Nm. Use a spanner on the external hex SW17 only, never on the tube side. Do not overtighten into a plastic port.

After fitting, pressurise slowly and check for leaks with a soap solution. During maintenance, replace fittings whose release ring is damaged or where the tube end shows scoring. Keep a stock of common sizes for fast repairs.

Typical applications of QSF-1/4-6-B in Oman and the GCC

Oman and the wider GCC put pneumatic and sensing equipment under demanding conditions: summer ambient heat, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. With a female G1/4 thread on one side, this fitting adapts a threaded male stud or nipple to 6 mm tubing, for example when a gauge, filter outlet or manifold plug already carries a male thread.

The datasheet lists a corrosion resistance class of 1 – Low corrosion stress. For outdoor or coastal installations, keep tube runs short, avoid direct sun on plastic tubing and protect exposed fittings from sand with covers or enclosures.

QSF-1/4-6-B compared with other Festo push-in fittings

Thread, tube size, nominal size and weight from the manufacturer sheets of the fittings listed in this range.

Part number Thread Tube Nominal size Weight
QSF-1/4-6-B Female thread G1/4 6 mm 5 mm 23 g
QS-V0-G1/4-8 Male thread G1/4 8 mm 7 mm 15 g
QSR-G1/4-6 Male thread G1/4 6 mm 3.4 mm 25 g
QSMK-G1/4-6 Male thread G1/4 6 mm 3 mm 26 g
QS-1/4-12-I Male thread R1/4 12 mm 6.3 mm 29 g
QSM-G1/8-4 Male thread G1/8 4 mm 2.9 mm 9.4 g
QS-G1/8-6-I Male thread G1/8 6 mm 4.2 mm 8.3 g
QS-1/4-6-I Male thread R1/4 6 mm 4.2 mm 13 g

Information to send with your QSF-1/4-6-B RFQ

  • Full part number QSF-1/4-6-B and quantity (the datasheet pack size is 10).
  • Thread type and size on the mating port.
  • Tubing material and outside diameter.
  • Operating pressure, medium and temperature.
  • Any flame, cleanroom or water-service requirement.
  • Delivery location in Oman or the GCC.

Documents and quotation

The manufacturer data sheet for QSF-1/4-6-B is attached on this page for download.

Send the part number QSF-1/4-6-B with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.

Other Models in the Festo Push In Fittings Range

Seven Star LLC supplies models from the Festo Push In Fittings range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Festo QS-V0-G1/4-8 Push-in FittingPipes & FittingsView details
Festo QSR-G1/4-6 Push-in FittingPipes & FittingsView details
Festo QSMK-G1/4-6 Push-in FittingPipes & FittingsView details
Festo QS-1/4-12-I Push-in FittingPipes & FittingsView details
Festo QSM-G1/8-4 Push-in FittingPipes & FittingsView details
Festo QS-G1/8-6-I Push-in FittingPipes & FittingsView details
Festo QS-1/4-6-I Push-in FittingPipes & FittingsView details
Festo QSF-1/4-6-B Push-in FittingPipes & FittingsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Festo QSF-1/4-6-B Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo QSF-1/4-6-B Push-in Fitting

Answers from our engineering team on installation, compatibility and integration.

01What thread and tube size does the QSF-1/4-6-B have?
The datasheet lists Female thread G1/4 on the thread side and For tubing outside diameter of 6 mm on the tube side for article 153024.
02What pressure can the QSF-1/4-6-B be used at?
Over the full temperature range the datasheet gives -0.95 to 6 bar, and -0.95 to 14 bar at moderate temperature.
03What is the nominal size of the QSF-1/4-6-B?
The nominal size is 5 mm and the product weighs 23 g according to the data sheet.
04How is the QSF-1/4-6-B tightened?
Mounting is by external hex SW17. The nominal tightening torque is 9 Nm.
05Can the QSF-1/4-6-B be used with water?
The datasheet lists liquid, ice-free water as a medium with the limit: Water: max. 0.6 MPa at max. 50°C.