Viking Johnson Dismantling Joint 3-40 Inch ANSI 150

Description

A length-adjustable flanged spool for valve and pump removal

The Viking Johnson Dismantling Joint is, in the words of the datasheet, in essence a double flanged pipe where the flange-to-flange dimension can be adjusted. It sits next to a valve, pump or meter so that the equipment can be removed and refitted without moving the rest of the pipework. The standard product in this datasheet covers 3 to 40 inch with ANSI 150 flange drilling, a nominal flange-to-flange length of 174 mm on the 3 to 12 inch sizes and 277 mm on 14 to 36 inch.

The joint is built from a fabricated flange adaptor body in rolled steel to BS EN 10025-2 grade S275, a spigot, a sleeve, an end ring and a gasket, tied together with tie rods. Two standard variants are offered: zinc plated steel hardware, and a stainless steel option with A4 tie rods. Larger diameters than 40 inch are on application.

Dismantling joint technical data

Parameter Specification
Standard sizes 3 inch to 40 inch, ANSI 150 flange drilling (ASME B16.5 / B16.47)
Working pressure, water In accordance with the flange rating
Working pressure, gas 6 bar
Vacuum -0.7 bar
Site test pressure 1.5 x working pressure, short duration (2 hours)
Temperature EPDM and nitrile: -20 C to +90 C; above 60 C bolts may need re-tightening
Angularity None; the joint does not accommodate angular movement
Tie rod option 1 (zinc plated) ASTM A193 grade B7 / BS 4882 MB7, yield 725 N/mm2; nuts ASTM A194 grade 2H / M2H
Tie rod option 2 (stainless) BS EN ISO 3506-1 grade A4 class 70, yield 450 N/mm2; nuts A4 class 80
Flange adaptor body Fabricated rolled steel BS EN 10025-2 grade S275
End ring options Ductile iron EN-GJS-450-10 or rolled steel S275
Sleeve options Steel tube BS EN 10255 or BS EN 10216-1 P265TR1, or rolled steel S275 / S355
Gasket EPDM to BS EN 681-1 type WA as standard; other grades on request
Coating Flange adaptor, spigot and end ring: Rilsan Nylon 11; bolts and nuts Sheraplex; steel tie rods and nuts Zn3 zinc coated
Potable water approvals as printed Nylon 11: WRAS, DVGW, W270, ACS, KIWA; EPDM: WRAS

Standard product dimensions from the datasheet (mm: E flange thickness, A flange OD, B nominal, C minimum and D maximum flange-to-flange length; tie rods by diameter x length; total weight in kg for the zinc plated and stainless variants).

Size E A B C D Tie rod size Rods zinc Weight zinc kg Rods stainless Weight stainless kg
3 in 25 190 194 174 214 5/8” x 12 1/2” 4 14.0 4 14.0
4 in 25 229 194 174 214 5/8” x 12 1/2” 4 17.4 4 17.4
6 in 25 279 194 174 214 3/4” x 13” 4 23.8 4 23.8
8 in 25 343 194 174 214 3/4” x 13” 4 33.3 4 33.3
10 in 25 406 194 174 214 7/8” x 13 1/2” 4 43.0 4 43.0
12 in 25 483 194 174 214 7/8” x 13 1/2” 4 59.1 4 59.1
14 in 25 533 302 277 327 1” x 19” 4 82.8 4 82.8
16 in 25 597 302 277 327 1” x 19” 4 95.8 4 95.8
18 in 25 635 302 277 327 1 1/8” x 19” 4 103.0 4 103.0
20 in 25 698 302 277 327 1 1/8” x 19 1/2” 5 121.0 6 121.0
24 in 25 813 302 277 327 1 1/4” x 20 1/2” 5 151.0 6 151.8
28 in 25 927 302 277 327 1 1/4” x 22” 7 187.0 8 187.6
30 in 25 984 302 277 327 1 1/4” x 22 1/2” 7 202.0 10 218.0
32 in 25 1060 302 277 327 1 1/2” x 23” 7 225.0 8 233.0
36 in 25 1168 307 277 337 1 1/2” x 24 1/2” 8 291.0 10 308.0
40 in 38 1289 320 290 350 1 1/2” x 25” 9 441.0 12 467.0

How the adjustment works and how to use it

The difference between the maximum and minimum flange-to-flange length is the longitudinal adjustment, 40 mm on the 3 to 12 inch sizes (174 to 214 mm), 50 mm on 14 to 36 inch (277 to 327 mm) and 60 mm on 40 inch (290 to 350 mm), calculated from the datasheet note that the maximum adjustment is maximum minus minimum length. Because the joint cannot take angular movement, align the pipework before fitting it. Tie rod torque depends on the flange gasket, which is not supplied by Viking Johnson, so the datasheet refers you to the flange gasket supplier. For longer flange-to-flange dimensions or larger adjustment, ask the manufacturer.

Selection and ordering guide

  • Confirm the mating flange: this datasheet is for ANSI 150 only; other drillings are special.
  • Choose zinc plated or stainless tie rods and nuts; stainless adds a few kilograms on the larger sizes (for example 308 kg against 291 kg on 36 inch).
  • Specify the face-to-face length range you need; if the standard 40 to 60 mm adjustment is not enough, request a special.
  • No single order code is printed in the datasheet, so quote size, drilling, tie rod variant and gasket compound for confirmation before ordering.

Installation notes

  • Set the joint at its nominal flange-to-flange length, fit the mating flange gasket, and then use the tie rods to lock the position.
  • Do not rely on the joint to correct angular misalignment; it accommodates none.
  • Water contact components are listed with potable water approvals as printed.

Applications in Oman and the GCC

Pump stations, valve chambers, meter assemblies and process skids all use dismantling joints so that a valve or pump can be lifted out without cutting pipe. ANSI 150 drilling matches the flanges common on oil and gas, petrochemical and utility equipment. Within the printed temperature and pressure limits it also suits cooling water and fire water services.

Selection and installation notes

A dismantling joint is placed next to the equipment that will be removed, so confirm the flange standard and pressure class, the nominal size and the range of length adjustment before ordering. Set the joint at the correct length, tighten the tie bars evenly, support the pipe on both sides so that the joint does not carry its weight and fit it so that the equipment can be taken out without moving the pipework.

Information needed for a quotation

Send the full model code, the quantity, the delivery location in Oman or the GCC, the intended use and any accessories needed, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification and the site risk assessment before a purchase is confirmed. Ratings, standards and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Related items and documents

See the pipes and fittings category for couplings and flange adaptors. The datasheet is attached; Seven Star LLC can quote by size.

Related Viking Johnson products: Viking Johnson MaxiDaptor Flange Adaptor DN50-DN300, Viking Johnson HandiClamp Single Band Stainless Repair Clamp, Viking Johnson MaxiFit Wide-Tolerance Pipe Coupling DN40-DN300, Viking Johnson MaxiStep Reducing Coupling DN50/65-DN225/250, Viking Johnson AquaGrip Restrained Coupling for PE Pipe 63-180mm and Viking Johnson MegaFit Long-Sleeve Pipe Coupling DN50-DN300.

Datasheets & Documents
  • PDF Datasheet Viking Johnson dismantling joints 3 inch to 40 inch ANSI 150 datasheet (DR10998, issue 8) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Viking Johnson is a British manufacturer of pipe couplings, flange adaptors and repair clamps for water, gas and industrial pipelines, based in Hitchin, Hertfordshire. It traces its history to the Victory Pipe Joint Company, registered on 23 July 1919, which became Victaulic Company Ltd in 1927 and moved to Hitchin by 1942. Since 2003 it has been part of Crane.

Viking Johnson company profile

Origins Victory Pipe Joint Company, registered 23 July 1919
Headquarters Hitchin, Hertfordshire, England
Ownership Crane, since 2003
Previous owners Stewarts & Lloyds, British Steel (1967), employee buy-out (1983)
Product families MaxiFit wide-tolerance couplings, MaxiDaptor flange adaptors, AquaGrip and FlexLock restrained couplings, EasiClamp and HandiClamp repair clamps, dismantling joints

Milestones

  • 1919: The Victory Pipe Joint Company is registered.
  • 1927: The company becomes Victaulic Company Ltd.
  • 1942: Operations move to Hitchin.
  • 1983: An employee buy-out forms Victaulic plc.
  • 2003: Crane acquires Viking Johnson.

Coupling and adaptor ranges

The datasheets cover the MaxiFit, MaxiStep and UltraGrip couplings, the MaxiDaptor and AquaGrip flange adaptors and couplings, the FlexLock and MegaFit couplings, dismantling joints from 3 to 40 inch, and the EasiClamp and HandiClamp repair clamps. Many are rated for 16 bar water and use EPDM or nitrile gaskets with Rilsan Nylon 11 coated ductile iron bodies. The sheets print potable water listings such as WRAS, DVGW and KIWA where they apply, and state the temperature, vacuum and angularity limits of each product.

Requesting a Viking Johnson quotation

Send the pipe material, both pipe outside diameters, the working pressure and medium, the flange drilling for adaptors and the gasket compound. The datasheet size tables allow the exact configuration to be confirmed before an offer is issued. Tell us the destination site conditions, such as soil, water quality and temperature, so the gasket and coating choice can be checked against the datasheet limits.

Viking Johnson products we list

Family Examples
Pipes & Fittings AquaGrip Restrained Coupling for PE Pipe…, EasiClamp 4-Bolt Pipe Repair Clamp DN50-…, FlexLock Restrained Coupling for Steel P…, HandiClamp Single Band Stainless Repair…, MaxiDaptor Flange Adaptor DN50-DN300, MaxiFit Wide-Tolerance Pipe Coupling DN4…

Facts checked against Viking Johnson's own Times Past history and 75th anniversary guide, October 2026.

FAQ

Questions about the Viking Johnson Dismantling Joint 3-40 Inch ANSI 150

Answers from our engineering team on installation, compatibility and integration.

01What is a dismantling joint?
A double flanged pipe whose flange-to-flange length can be adjusted, used to remove and refit valves, pumps or meters.
02What size range does the datasheet cover?
3 inch to 40 inch with ANSI 150 flange drilling; larger diameters are on application.
03How much adjustment is available?
The datasheet gives minimum and maximum lengths: 174-214 mm on 3 to 12 inch, 277-327 mm on 14 to 36 inch.
04Can it correct angular misalignment?
No. The datasheet says dismantling joints cannot accommodate any angularity.
05Is Seven Star LLC a distributor of Viking Johnson?
No. Seven Star LLC is an independent supplier in Muscat that sources genuine products on request; we do not claim any distributor status.