Brand

SKF

SKF is the Swedish bearing manufacturer founded in Gothenburg in 1907. The company was built on the self-aligning ball bearing developed by engineer Sven Wingquist, who became its first managing director. Today SKF also makes seals, lubrication systems, condition monitoring equipment and maintenance tools. Seven Star LLC is an independent supplier in Muscat. We list SKF bearings, greases, automatic lubricators, condition monitoring sensors and maintenance tools, and supply them to maintenance teams in Oman and the GCC by designation.

Read the full brand profile
  • 57 products
  • 5 categories

Showing 1–24 of 57 products

Brand profile

About SKF

All brands →
Founded
1907
Headquarters
Gothenburg, Sweden
Speciality
Bearings, seals and lubrication systems
Listed with us
57 products in 5 categories

SKF is the Swedish bearing manufacturer founded in Gothenburg in 1907. The company was built on the self-aligning ball bearing developed by engineer Sven Wingquist, who became its first managing director. Today SKF also makes seals, lubrication systems, condition monitoring equipment and maintenance tools.

Seven Star LLC is an independent supplier in Muscat. We list SKF bearings, greases, automatic lubricators, condition monitoring sensors and maintenance tools, and supply them to maintenance teams in Oman and the GCC by designation.

SKF company profile

Established 1907, Gothenburg, Sweden; first factory built in 1908
Founding product Sven Wingquist’s self-aligning ball bearing
Name From Svenska Kullagerfabriken, Swedish for “Swedish Ball Bearing Factory”
Product families Rolling bearings, seals, lubricants and lubrication systems, condition monitoring sensors and analysers, and maintenance tools for mounting, alignment and dismounting

Milestones

  • 1907: Sven Wingquist's self-aligning ball bearing is patented and SKF is founded in Gothenburg.
  • 1908: The first factory is built.
  • 1912: SKF is represented in 32 countries.
  • 1926: SKF sets up AB Volvo as a subsidiary to build cars; the first production car follows in 1927.
  • 1935: Volvo becomes an independent company.

SKF products we list

Family Models Typical use
Bearings 6205-2RSH/C3, 6206-2RS1, 6314, 7312 BECBM Motors, pumps, fans and gearboxes
Greases LGMT 2, LGMT 3, LGEP 2, LGWA 2, LGHP 2, LGHB 2, LGEV 2 General, heavy-load, high-temperature and slow-speed bearing lubrication
Automatic lubrication TLSD, LAGD 125 (ATEX), TLMR, TLMP 1008, TLGH 1 grease gun Steady greasing of hard-to-reach or many lubrication points
Condition monitoring Microlog Analyzer AX, CMSS 2200, CMSS 793-EE (ATEX), TKRS 21 stroboscope, TKRT 31 tachometer Vibration routes, permanent sensors and speed checks
Alignment TKSA 41 shaft alignment, TKBA 40 belt alignment, TMAS shims Laser alignment of couplings and belt drives
Mounting and dismounting TIH 030m, TIH 100m, TIH 220m heaters, TMFT 36, TMMA 75H, TMMP 10, TMHP 30/170 pullers, TMJL 100 pump Fitting and removing bearings without damage

An SKF designation describes the bearing exactly. In 6205-2RSH/C3, “62” is a light-series deep groove ball bearing, “05” means a 25 mm bore (05 × 5), “2RSH” means rubber seals on both sides, and “C3” means internal clearance larger than normal, which motors often need because the inner ring runs warmer than the outer. Choosing the right grease matters just as much: a general grease such as LGMT 2 suits most motors, while heavy loads, high temperatures or slow speeds need an EP, high-temperature or high-viscosity grade.

Where SKF products are used

In Oman and the GCC, SKF bearings, lubricants and tools are used by maintenance teams in oil and gas, power and desalination, cement, mining, steel, water and food plants, and by motor and pump repair workshops.

Ordering SKF products: what we need

Send the full bearing designation including all suffixes (seals, clearance, cage), and the quantity. For greases, send the grade and pack size. For tools and lubricators, send the model and, for heaters, the largest bearing weight and bore you need to heat.

Facts checked against SKF company history, October 2026.

Request a Quote for SKF Products

Looking for SKF parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine SKF products for customers across Oman and the GCC and replies with a formal quotation.

Free, no-obligation quotation · takes about 1 minute

Other enquiries: [email protected] · WhatsApp

FAQ

Questions about SKF

Common questions about SKF equipment, part numbers and supply to Oman and the GCC.

01What does 2RS1 mean on an SKF 6206-2RS1 bearing?
The basic designation 6206 identifies a deep groove ball bearing with a 30 mm bore. The suffix 2RS1 means a rubber seal on both sides of the bearing. A bearing marked 2Z has metal shields instead. Any further suffix, such as C3 for internal clearance, must also be stated.
02How do I identify an SKF bearing when the marking is unreadable?
Measure the bore, the outside diameter and the width in millimeters, and note whether the bearing has seals, shields or is open. Add the machine and position it came from. With those dimensions we can find the matching designation in the SKF catalog and confirm it with you before quoting.
03What is the SKF TIH 030m used for?
It is a small induction heater for mounting bearings. The bearing is heated so that it expands and slides onto the shaft without force. Published SKF data for the TIH 030m gives bearings up to 40 kg with bores from 20 to 300 mm, and 230 V and 110 V versions. State the supply voltage at your site in the inquiry.
04What should I send for a quotation on SKF items?
For bearings, send the full designation with all suffixes and the quantity. For tools such as the TKSA 41 or the Microlog Analyzer AX, send the model designation and the kit or accessories required. A photo of the old part or its packaging label helps us check the code.
05Is Seven Star LLC a distributor of SKF?
No. Seven Star LLC is an independent industrial supplier based in Muscat. We source SKF bearings and tools through commercial channels, check the model or order code against the manufacturer's documentation before quoting, and provide the manufacturer's datasheet and the certificates the manufacturer issues with the order on request.