Brand:

Beamex 8009550 40 Bar Pressure T-Hose Set (1.5 m)

Description

Overview of Beamex 40 bar pressure T-hose set Beamex 8009550

The Beamex 8009550 is a 40 bar pressure T-hose set of 1.5 m with NPT fittings and seals. The hoses are rated for 40 bar (600 psi) and have Bx G1/8 inch female threads at all ends.

Hoses and fittings are among the parts that wear first in pressure calibration, so spares are held by most instrument workshops.

This page describes Beamex 40 bar pressure T-hose set for buyers who need the exact part number Beamex 8009550. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.

Key features of 8009550

  • Order code: 8009550.
  • Pressure rating: 40 bar / 600 psi.
  • Thread at hose ends: Bx G1/8 inch female.
  • Construction: 3 x 0.75 m (30 in) hoses with a T-block, total 1.5 m (60 in).
  • Included fittings: Bx G1/8 male to 1/4 NPT male (7113300); Bx G1/8 male to 1/8 NPT male (7113260).
  • Also included: Spare O-rings and lock rings.

Technical specifications for 8009550

Order code 8009550
Pressure rating 40 bar / 600 psi
Thread at hose ends Bx G1/8 inch female
Construction 3 x 0.75 m (30 in) hoses with a T-block, total 1.5 m (60 in)
Included fittings Bx G1/8 male to 1/4 NPT male (7113300); Bx G1/8 male to 1/8 NPT male (7113260)
Also included Spare O-rings and lock rings

All values above come from the manufacturer documentation and may change with later revisions. Please quote 8009550 when you need the matching datasheet or a confirmation of the current revision.

Typical applications in Oman and the GCC

Pressure calibration in the field depends on sound hoses and fittings between the pump, the calibrator and the instrument under test. Instrument technicians in Oman and the GCC use them on pressure transmitters, gauges and switches in oil and gas, water and power plants.

Wear, kinks and damaged threads are common after a campaign, so keeping spare hose sets in the kit prevents leaks from stopping a job.

The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.

Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.

Selection and compatibility notes for 8009550

The T-hose connects the pressure source, the calibrator pressure module and the device under test. For higher pressures use the 630 bar hoses such as 7021390.

Before ordering 8009550, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.

If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8009550 before it is supplied.

Installation and commissioning of 8009550

Depressurise the system before connecting or disconnecting 8009550. Check the thread type at each end and fit the correct fitting and seal. Tighten by hand and finish with a suitable wrench without over-torquing.

Raise pressure slowly, check for leaks, and never exceed the pressure rating of the weakest part in the setup.

Maintenance and care

Inspect hoses before each use for cuts, bulges and damaged threads. Replace seals and O-rings when they look worn. Keep the ends capped when not in use to avoid dirt entering the calibrator pressure module.

Retire any hose that has been overpressured, and never use 8009550 above its rated pressure.

Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.

Related products and ordering notes for 8009550

Related items are pressure fittings, O-rings, vent valves, pressure modules, calibration pumps and cases. Please state the pressure range and threads in your enquiry.

Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.

Please note that Seven Star LLC prepares each quotation for 8009550 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.

The part number 8009550 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.

Frequently asked questions about 8009550

  • What is the pressure rating of 8009550? 40 bar (600 psi), according to the manufacturer documentation for 8009550.
  • What is included? Three 0.75 m hoses with a T-block, two NPT fittings and spare O-rings and lock rings.
  • Which threads are on the hoses? Bx G1/8 inch female, according to the manufacturer documentation for 8009550.
  • Is it for high pressure? No. Use the 630 bar hoses for higher pressures.
  • What is the total length? 1.5 m (60 in), according to the manufacturer documentation for 8009550.

Documents and quotation

The official Beamex POC8 automatic pressure controller user manual is attached to this page as a PDF. Its options list (page 71) includes this order code as the T-hose set for low pressure. Send us the order code 8009550 and the serial number of your instrument and we will confirm fit and lead time in a written quotation.

Datasheets & Documents
  • PDF Datasheet Beamex POC8 User Manual (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 8009550 40 Bar Pressure T-Hose Set (1.5 m)

Answers from our engineering team on installation, compatibility and integration.

01What is the pressure rating of 8009550?
40 bar (600 psi), according to the manufacturer documentation for 8009550.
02What is included?
Three 0.75 m hoses with a T-block, two NPT fittings and spare O-rings and lock rings.
03Which threads are on the hoses?
Bx G1/8 inch female, according to the manufacturer documentation for 8009550.
04Is it for high pressure?
No. Use the 630 bar hoses for higher pressures.
05What is the total length?
1.5 m (60 in), according to the manufacturer documentation for 8009550.