Brand:

Beamex 8129780 MC6-T150 Spare Fuses (3 pairs)

Description

Overview of Beamex MC6-T150 spare fuse kit Beamex 8129780

The Beamex 8129780 kit includes three pairs of mains fuses for the MC6-T150 multifunction temperature calibrator and communicator. It can be used with either 115 V or 230 V mains voltage.

Spare fuses keep a dry block working after a mains surge or a blown fuse, and are a typical stock item for instrument workshops.

This page describes Beamex MC6-T150 spare fuse kit for buyers who need the exact part number Beamex 8129780. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.

Key features of 8129780

  • Order code: 8129780.
  • Contents: 3 pairs of mains fuses.
  • Fuse type: Littlefuse 02183.15HXP.
  • Mains voltage: 115 V or 230 V.
  • Fuse size (MC6-T150): T 3.15 A 250 V.
  • Fits: MC6-T150.

Technical specifications for 8129780

Order code 8129780
Contents 3 pairs of mains fuses
Fuse type Littlefuse 02183.15HXP
Mains voltage 115 V or 230 V
Fuse size (MC6-T150) T 3.15 A 250 V
Fits MC6-T150

All values above come from the manufacturer documentation and may change with later revisions. Please quote 8129780 when you need the matching datasheet or a confirmation of the current revision.

Typical applications in Oman and the GCC

Dry-block calibrators draw considerable mains current, and a surge or a failing supply can blow a fuse during a job. Having a matched spare pack on hand avoids a lost day when the unit is needed at the next instrument.

Instrument workshops in Oman and the GCC with variable site supplies keep spare fuses with each block, together with the power cord and transport case.

The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.

Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.

Selection and compatibility notes for 8129780

Replace the fuses according to the MC6-T user manual. Disconnect the mains cord before opening the fuse holder. Do not use this kit for the MC6-T660, which needs 8129770 or 8129760.

Before ordering 8129780, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.

If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8129780 before it is supplied.

Installation and commissioning of 8129780

Disconnect the mains cord and let the unit cool before opening the fuse holder. Remove the blown fuse, check the rating printed on the unit against the kit 8129780, and fit the replacement according to the MC6-T user manual. Close the holder and test the unit before putting it back to work.

If a new fuse blows immediately, stop and send the unit for service instead of fitting a higher rated fuse.

Maintenance and care

Keep spare fuses in their pack, dry and clean. Record each replacement in the instrument log, because repeated failures can point to a supply problem or an internal fault.

Never substitute a fuse with a different type or rating; use only the type listed for 8129780.

Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.

Related products and ordering notes for 8129780

Related parts are the power cord, the transport case, the insert removal tool and inserts for the block. Please include the calibrator model and supply voltage in your enquiry.

Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.

Please note that Seven Star LLC prepares each quotation for 8129780 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.

The part number 8129780 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.

Frequently asked questions about 8129780

  • What does 8129780 contain? Three pairs of mains fuses, Littlefuse 02183.15HXP.
  • Which calibrator does it fit? The MC6-T150, according to the manufacturer documentation for 8129780.
  • Which voltage can it be used with? Both 115 V and 230 V, according to the manufacturer documentation for 8129780.
  • Does it fit the MC6-T660? No. The MC6-T660 uses 8129770 (115 V) or 8129760 (230 V).
  • Where are replacement instructions? In the MC6-T user manual, according to the manufacturer documentation for 8129780.

Documents and quotation

The official Beamex MC6-T brochure is attached to this page as a PDF. The accessories list on page 19 includes the spare fuses for the MC6-T150 dry block. Share order code 8129780 together with your calibrator model and we will confirm the exact part in a written quotation. The brochure also lists the other MC6-T150 accessories, so you can order the fuses together with spare inserts or a transport case in a single request and keep the dry block back in service without delay.

Datasheets & Documents
  • PDF Datasheet Beamex MC6-T Brochure (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 8129780 MC6-T150 Spare Fuses (3 pairs)

Answers from our engineering team on installation, compatibility and integration.

01What does 8129780 contain?
Three pairs of mains fuses, Littlefuse 02183.15HXP.
02Which calibrator does it fit?
The MC6-T150, according to the manufacturer documentation for 8129780.
03Which voltage can it be used with?
Both 115 V and 230 V, according to the manufacturer documentation for 8129780.
04Does it fit the MC6-T660?
No. The MC6-T660 uses 8129770 (115 V) or 8129760 (230 V).
05Where are replacement instructions?
In the MC6-T user manual, according to the manufacturer documentation for 8129780.