Brand:

Moog G040-119A Valve Checker for MFB Servo Valves

Description

Moog G040-119A valve checker overview

The Moog G040-119A is a hand-held instrument for rapid on-site inspection of servo valves with mechanical feedback. It was developed from field experience as an aid for commissioning, servicing and troubleshooting control systems that use such valves. When a hydraulic axis misbehaves, a technician often needs to know whether the valve or the electronics is at fault, and the G040-119A answers that question by driving the valve alone.

The method is simple. The valve connector is removed from the system, the cable of the G040-119A is plugged in, and the servo valve is then operated and checked independently of the system electronics. Problems such as null shift, unsuitable oscillation or failure to reach maximum speed can be traced to the hydraulic side or to the electronic side. The G040-119A supplies a controllable current of up to 100 mA, in either polarity, and displays the current and the detected coil resistance.

This model replaces the idea of carrying a laboratory power supply to the plant: it is battery powered with a 21700 rechargeable lithium cell and charges through USB Type-C. The maker states that the G040-119A can deliver 100 mA continuously for not less than 12 hours.

Key features of the Moog G040-119A

  • Performs hydraulic tests independently of the electronics, allowing quick troubleshooting.
  • Powered by a long-lasting rechargeable lithium battery that charges over USB Type-C.
  • LCD with clear digital measurement of current and coil resistance, with automatic backlight control and a battery status indicator.
  • Compact and lightweight (350 g with battery) for easy portability, with a carry case for storage and transport.
  • Series coil connection cable as standard; a parallel coil cable can be ordered.
  • CE marked, tested to EN 61000-6-2 and EN 61000-6-4.

G040-119A technical specifications

Part number G040-119A
Type Portable valve checker for mechanical feedback (MFB) servo valves
Outputs 100 mA into 50 ohm; 10 mA into 500 ohm
Range switch 20 mA range for 500 and 1,000 ohm coils; 100 mA range for other coils
Power source Battery, 21700 rechargeable lithium, 5000 mAh, 3.7 V (4.2 V full)
Charging USB Type-C, 5 V
Runtime 100 mA continuous output for not less than 12 hours
Auto power off After 30 minutes of inactivity
Display 2-line, 3-digit LCD showing output current and load resistance, automatic backlight
Connecting cable Series coil connection, 1.5 m (standard); parallel coil connection optional
Dimensions 178 mm L x 91 mm W x 55 mm H
Weight 350 g including battery
EMC EN 61000-6-2 and EN 61000-6-4
Scope of supply Checker with series coil cable, carry case; battery, 5 V charger and USB Type-C cable are not included

The specifications of the G040-119A above come from the maker’s datasheet dated July 2025. The battery, the 5 V battery charger and the USB Type-C charging cable are not part of the supply, so the user furnishes them.

Typical applications in oil and gas, utilities, water and manufacturing

Any plant with servo-controlled hydraulics benefits from a tool like the G040-119A: turbine and compressor hydraulic skids in oil, gas and power facilities, hydraulic presses and rolling lines in metals and manufacturing, test benches, and hydraulic gate actuators in water works. In Oman and the GCC, where sites can be remote, a battery-powered checker avoids waiting for a service engineer.

Typical jobs include confirming that a suspect servo valve moves smoothly through its range, measuring coil resistance to detect an open or shorted coil, finding the null current and verifying the amplifier output by comparison. Maintenance teams often carry one G040-119A per site.

Selection and compatibility notes for G040-119A

The G040-119A is for mechanical feedback valves. Electrical feedback valves with onboard electronics need a different instrument; the G040-123C checker is meant for that family. Check the coil resistance of your valve: for 500 and 1,000 ohm coils use the 20 mA range, and note that 1,000 ohm coils must be connected in parallel to the checker because standard series cables will not work.

Choose the cable that matches the valve wiring. The G040-119A comes with a series coil cable of 1.5 m; a parallel coil cable CD42019-001 and a crocodile-clip lead CD42708-001 are listed as separate items, and CD42009-001 is the series cable part number.

Installation and commissioning of the G040-119A

Before first use, fit the battery and connect a charger so the instrument activates, which is only needed once while the battery remains installed. Recommended replacement batteries listed by the maker are the INR21700-50ME and INR21700-50G types.

To test a valve, remove the valve connector, plug in the cable of the G040-119A, set the polarity switch and the range switch and pull the knob up to switch on. Turn the knob to vary the output from minus 100 percent to plus 100 percent of the selected range, with zero at the midpoint. A short-circuit test of the cables should read 98 to 102 mA at the 100 mA range.

Maintenance and care

Charge the G040-119A through the USB Type-C port with a 5 V supply. If the unit is left idle for a long time, the maker advises checking it every six months and keeping the battery at no less than level one. Replace a damaged battery with one of the same specification.

Keep the cables dry and the connector clean. If the LCD shows zero current, perform the short-circuit test described above to decide whether the valve or the G040-119A is faulty. Store the instrument in its carry case.

Related products and ordering notes for G040-119A

Related items are the G040-123C valve checker for electrical feedback valves, the IN123-825-001 buffer amplifier, the IN122-829A servo amplifiers and the 761, 631 and 72 Series servo valves with mechanical feedback.

For a quotation on the G040-119A, state the quantity, the cable version needed and the delivery location. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.

Frequently asked questions in short

The G040-119A is a battery-powered checker for mechanical feedback servo valves. It outputs up to 100 mA, shows current and coil resistance on an LCD and charges through USB Type-C. See the questions below for the supply scope and range selection.

Documents and quotation

The manufacturer’s datasheet for the G040-119A is attached as a PDF. To obtain a quotation, send an RFQ with the part number G040-119A and the quantity; Seven Star LLC will reply with availability and lead time for Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet Moog G040-119A Valve Checker for MFB Servo Valves Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.

Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.

MOOG company profile

Founded July 1951, East Aurora, New York, as Moog Valve Company
Founders Bill Moog, Art Moog and Lou Geyer
Headquarters East Aurora, New York, USA
Ownership Public company, New York Stock Exchange
Product families Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems

Milestones

  • 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
  • 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
  • 1959: The company goes public as Moog Servocontrols Inc.

Moog servo valves and motors listed

The Moog products on this page are:

  • G761 series: two-stage flow control servo valve with mechanical feedback
  • 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
  • Servo valves and servo-proportional valves for hydraulic control in general
  • G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series

Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.

Where Moog servo valves are used

Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.

MOOG products we list

Family Examples
Hydraulic Valves & Components 72 Series Two-Stage Flow Control Servo V…, 79 Series Flow Control Servo Valve, D634 Direct Drive Servo Valve, D638 Digital p/Q Control Servo Valve, D661 Pilot-Operated Servo Valve, D671 to D675 Pilot-Operated Servo-Propor…, D791 Pilot-Operated Servo Valve, D792 High-Flow Servo Valve and 5 more
Electric Motors G-3LM6-048-00-00-01 Brushless Servo Motor

Ordering Moog parts: what we need

The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.

Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.

Facts checked against published Moog company histories, October 2026.

FAQ

Questions about the Moog G040-119A Valve Checker for MFB Servo Valves

Answers from our engineering team on installation, compatibility and integration.

01What does the G040-119A check?
It checks servo valves with mechanical feedback by driving the valve coil independently of the system electronics, so hydraulic and electronic faults can be separated.
02What is included with the G040-119A?
The ordering table lists the valve checker with a 1.5 m series coil connection cable. The battery, the 5 V charger and the USB Type-C cable are not included.
03Which range should I use with the G040-119A?
Use the 20 mA range for 500 and 1,000 ohm coils or valves needing a small signal, and the 100 mA range for all other coils. 1,000 ohm coils must be connected in parallel.
04How long does the battery of the G040-119A last?
The maker states a 100 mA continuous output for not less than 12 hours from the 5000 mAh lithium battery, with automatic power off after 30 minutes of inactivity.
05How do I request a quotation for the G040-119A?
Send an RFQ with G040-119A, the quantity and the delivery location. Seven Star LLC replies with availability and lead time.