- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: MOOG
Moog G631-3002B Servo Valve, 10 l/min, ISO 4401 Size 05
Description
Moog G631-3002B servo valve overview
The Moog G631-3002B belongs to the 631 Series of flow control servo valves, a two-stage design with an analog interface that covers rated flows from 5 to 75 l/min. The G631-3002B is the preferred model with type designation H10JOFM4VBR and it delivers 10 l/min at a 35 bar drop per spool land. It uses the ISO 4401 size 05 mounting pattern and an aluminium body rated for 315 bar at the working ports.
A polarized torque motor with two coils drives a nozzle-flapper first stage, and the pressure difference it creates moves a conventional four-way spool. A cantilever feedback wire from the flapper to the spool closes the loop mechanically, so the G631-3002B holds a spool position proportional to the input current. The result is a rugged valve for position, speed, pressure and force control.
Reading the type code of the G631-3002B: H is the high-response version, 10 is the flow code, J is the 315 bar aluminium body, O is the axis-cut linear spool, F is the low-flow nozzle-flapper pilot, M is the mid spool position without signal, 4 is internal pilot supply, V is the FKM seal, B puts the connector over the B side and R is the plus or minus 50 mA series coil option.
Key features of the Moog G631-3002B
- Dry torque motor with a flexure tube between the electrical and hydraulic sections, so oil does not reach the motor air gaps in the G631-3002B.
- Field-replaceable pilot stage filter, which allows preventive maintenance without sending the whole valve away.
- External null bias adjustment, so a technician can trim the null of the valve to the machine without changing controller settings.
- Dual coil torque motor with all four leads at the connector for single, series or parallel wiring.
- Most valves are set to move to a fail-safe position when the command signal is interrupted, as described by the maker.
- Rated flow of 10 l/min and internal leakage below 2.3 l/min at 3,000 psi for the G631-3002B.
- ISO 4401-05-05-0-94 mounting pattern and weight of 2.2 kg.
G631-3002B technical specifications
| Part number (model) | G631-3002B |
|---|---|
| Type designation | H10JOFM4VBR |
| Series | Moog 631 Series flow control servo valve |
| Valve design | Two-stage, spool and bushing, dry torque motor, mechanical feedback |
| Pilot stage | Nozzle flapper, low flow (F) |
| Rated flow at 35 bar per spool land | 10 l/min (2.5 gpm) |
| Internal leakage at 3,000 psi | Less than 2.3 l/min (0.60 gpm) |
| Spool design | 4-way, axis cut, linear |
| Body and pressure rating | Aluminium, 315 bar (4,500 psi) at ports P, A, B and X |
| Return port T | 20 percent of pilot pressure, maximum 100 bar (1,450 psi) |
| Pilot supply | Internal |
| Spool position without signal | Mid position |
| Seal material | Fluorocarbon (FKM) 85 Shore A |
| Rated current | Single coil 100 mA; command code R is 50 mA series, 28 ohm per coil at 25 degC |
| Connector | Connector over the B side; the standard connector mates with an MS3106F14S-2S |
| Mounting pattern | ISO 4401-05-05-0-94 |
| Step response 0 to 100 percent | 18 ms |
| Threshold | 1.0 percent of rated signal |
| Hysteresis | Less than 3 percent of rated signal |
| Null shift for 38 degC change | Less than 4 percent of rated signal |
| Flow deviation | Plus or minus 10 percent of rated flow |
| Null adjust authority | Greater than 10 percent of rated flow |
| Weight | 2.2 kg (4.9 lb) |
| Ambient temperature | Minus 40 to plus 135 degC |
| Hydraulic fluid | Hydraulic oil to DIN 51524 parts 1 to 3 and ISO 11158; viscosity 10 to 85 mm2/s recommended |
| Vibration and shock | 30 g, 3 axes |
The values for the G631-3002B are taken from the 631 Series catalog. Static and dynamic figures are typical values, and the null and leakage figures apply under the test conditions stated by the maker.
Typical applications in oil and gas, utilities, water and manufacturing
A servo valve such as the G631-3002B is the final control element in a closed hydraulic loop. In plants across Oman and the GCC the 631 style of valve turns up on hydraulic actuators of turbine and compressor control systems, on hydraulic positioning of large valves and gates, on rolling and forming equipment in metals and manufacturing, and on test benches and simulation rigs that must reproduce a motion profile.
With 10 l/min rated flow the G631-3002B suits mid-sized cylinders and small to medium hydraulic motors. Maintenance teams searching for the exact number G631-3002B are usually replacing a valve that has drifted in null, shown rising leakage or been damaged by contaminated oil, and they need the same type code to avoid retuning the loop.
Selection and compatibility notes for G631-3002B
Match the valve to the actuator by flow, not by pressure alone. The G631-3002B is rated 10 l/min at 35 bar per spool land; compute the flow at your real pressure drop and confirm that cylinder velocity is achieved with some margin. Check also that supply pressure stays within 315 bar and that the tank port pressure stays below 20 percent of pilot pressure, never above 100 bar.
Check the coil. The G631-3002B has coil code R, which is a 100 mA single-coil rating with 28 ohm per coil; the servo amplifier must provide this current. Confirm that the FKM 85 Shore A seal suits your oil, and that your fluid has a viscosity between 10 and 85 mm2/s at working temperature for best results.
The 631K intrinsically safe version is a different model with its own documentation, so the standard G631-3002B must not be treated as a hazardous-area device. State any certificate requirement when you send the RFQ.
Installation and commissioning of the G631-3002B
Mount the G631-3002B in any orientation on a manifold machined to ISO 4401-05-05-0-94, with clean o-rings and a surface free of burrs. Flush the circuit and fit the high-pressure filter before the valve is exposed to oil. Tighten the screws evenly and keep the shipping plate on until installation.
Wire the four-pin connector using the single, series or parallel scheme in the catalog; with the standard polarity a positive current from A to B opens P to B and A to T. Use a current-feedback amplifier. If the machine creeps at zero command, use the external null bias adjustment on the valve to trim it, as shown in the maker’s null adjust instructions.
Maintenance and fluid cleanliness
The maker recommends an ISO 4406 cleanliness class of 19/16/13 for functional safety and 17/14/11 for longer life, with filters rated beta 10 at 75 or better and beta 5 at 75 for longer life. Following these limits is the most effective way to protect a G631-3002B from wear of the spool edges and from pilot stage silting.
The catalog lists maintenance kit B52555RK200K001, containing base o-rings in FKM to AMS7259 and a filter disk, with extra o-rings needed for filter access. Replace the pilot filter at regular intervals, log null and leakage readings, and store spare valves with the protective plates in place, away from moisture.
Related products and ordering notes for G631-3002B
Other preferred models of the 631 range are G631-3002B (10 l/min), G631-3003B (19 l/min), G631-3004B (40 l/min), G631-3005B (60 l/min) and G631-3006B (75 l/min). Support equipment includes the IN123-825-001 buffer amplifier, the IN122-829A servo amplifier and valve checkers.
Please send the nameplate of the valve being replaced, the coil current, the fluid and the quantity when you ask for the G631-3002B. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.
Moog G631-3002B vs Other Moog Servo Valve l/min ISO 4401 Variants
Pick this variant when G631-3002B 10 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.
| Variant | Distinguishing detail |
|---|---|
| Moog G631-3002B Servo Valve, 10 l/min, ISO 4401 Size 05 (this page) | G631-3002B 10 |
| Moog G631-3004B Servo Valve, 40 l/min, ISO 4401 Size 05 | G631-3004B 40 |
| Moog G631-3005B Servo Valve, 60 l/min, ISO 4401 Size 05 | G631-3005B 60 |
| Moog G631-3006B Servo Valve, 75 l/min, ISO 4401 Size 05 | G631-3006B 75 |
Frequently asked questions in short
The G631-3002B is a 315 bar aluminium-body, 10 l/min two-stage servo valve with a low-flow nozzle-flapper pilot, ISO 4401 size 05 mounting and a connector over the B side. It needs an analog current drive of 100 mA single coil. The questions below cover the type code, spare kit and how to ask for a quote.
Documents and quotation
The manufacturer’s 631 Series datasheet is attached to this page so that the data for the G631-3002B can be checked. To get a quotation, send the RFQ with part number G631-3002B and the quantity; Seven Star LLC will answer with availability and lead time for Oman and the GCC.
Other Models in the 631 Range
Seven Star LLC supplies models from the 631 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Moog G631-3002B Servo Valve, 10 l/min, ISO 4401 Size 05 | Solenoid Valves | You are viewing this model |
| Moog G631-3003B Servo Valve, 19 l/min, ISO 4401 Size 05 | Solenoid Valves | View details |
| Moog G631-3004B Servo Valve, 40 l/min, ISO 4401 Size 05 | Solenoid Valves | View details |
| Moog G631-3005B Servo Valve, 60 l/min, ISO 4401 Size 05 | Solenoid Valves | View details |
Datasheets & Documents
- Datasheet Moog G631-3002B Servo Valve Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.
Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.
MOOG company profile
| Founded | July 1951, East Aurora, New York, as Moog Valve Company |
|---|---|
| Founders | Bill Moog, Art Moog and Lou Geyer |
| Headquarters | East Aurora, New York, USA |
| Ownership | Public company, New York Stock Exchange |
| Product families | Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems |
Milestones
- 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
- 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
- 1959: The company goes public as Moog Servocontrols Inc.
Moog servo valves and motors listed
The Moog products on this page are:
- G761 series: two-stage flow control servo valve with mechanical feedback
- 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
- Servo valves and servo-proportional valves for hydraulic control in general
- G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series
Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.
Where Moog servo valves are used
Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.
MOOG products we list
Ordering Moog parts: what we need
The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.
Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.
Facts checked against published Moog company histories, October 2026.
Browse MOOG products by category: Control Valves, Electromotors.
FAQ
Questions about the Moog G631-3002B Servo Valve, 10 l/min, ISO 4401
Answers from our engineering team on installation, compatibility and integration.
01What does the type designation H10JOFM4VBR mean?
For the G631-3002B: H is high response, 10 is the flow code, J is the 315 bar aluminium body, O the axis-cut spool, F the low-flow pilot, M the mid position, 4 internal pilot, V FKM seal, B the connector position and R the coil code.
02What is the rated flow of the G631-3002B?
The preferred-models table of the catalog lists 10 l/min (2.5 gpm) at 35 bar per spool land, with internal leakage below 2.3 l/min (0.60 gpm) at 3,000 psi.
03What coil current does the G631-3002B need?
Coil code R: single coil 100 mA, series 50 mA, parallel 100 mA, with 28 ohm per coil at 25 degC. Overdrive of more than 10 percent current is not recommended by the maker.
04Which maintenance kit is listed for the G631-3002B?
The catalog lists kit B52555RK200K001 with base o-rings in FKM and a filter disk. Extra o-rings are needed for filter access, and o-ring material depends on the application.
05How do I request a quotation for the G631-3002B?
Send an RFQ stating G631-3002B, the quantity and the delivery location. Seven Star LLC replies with availability and lead time.


















Reviews
There are no reviews yet.