Michell SF82-TX SF82 Industrial Dew-Point Transmitter

Description

Michell SF82-TX overview: fast-response dew-point transmitter for dryers

Michell SF82-TX is the parent order code of the Michell SF82 industrial dew-point transmitter. The datasheet describes it as available with a range of industry standard process connections and electrical connectors, with analog and digital outputs for compatibility with any electronic controller.

The transmitter measures from minus 60 to plus 60 degrees Celsius dew point with an accuracy of plus or minus 2 degrees Celsius dew point. It has a very fast response, with the datasheet listing 6 seconds from minus 60 to minus 20 degrees and 40 seconds in the drying direction.

It is aimed at refrigeration, membrane and adsorption dryers and portable dew-point checkers.

The image shows the SF82 transmitter from the manufacturer datasheet.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list Michell SF82-TX so that maintenance, instrumentation and procurement teams can quote the exact code that appears in the manufacturer documentation.

Key features of SF82-TX

  • Dew-point range minus 60 to plus 60 degrees Celsius, with dew-point or ppmV output scaling up to 24000 ppmV.
  • Two-wire 4-20 mA output, with Modbus RTU over RS485 on the M12 variant.
  • Traceable 9-point calibration certificate and plus or minus 2 degrees Celsius accuracy.
  • 316 stainless steel body, IP66 (MiniDIN) or IP65 (M12), weight 150 g class.
  • Maximum operating pressure of 100 barg with a 450 barg pressure safety rating.
  • Rail standards EN 61373 and EN 50121-3-2 listed for the M12 variant.

SF82-TX technical specifications

The table below lists values published by the manufacturer for the product family of SF82-TX. Where a value depends on the ordered configuration, the table says so and the order-code sheet governs.

Parameter Value
Order code (parent) SF82-TX
Measurement range Minus 60 to plus 60 degC dew point
Accuracy Plus or minus 2 degC dew point
Response time 6 s (minus 60 to minus 20 degC dp); 40 s (minus 20 to minus 60 degC dp)
Repeatability 0.5 degC dew point
Calibration 9-point certificate traceable to national standards
Output 4-20 mA two-wire; M12 variant also Modbus RTU RS485
Supply voltage 6.5 to 28 V DC (MiniDIN); 5 to 28 V DC (M12)
Operating temperature Minus 20 to plus 60 degC
Maximum operating pressure 10 MPag (100 barg)
Pressure safety rating 45 MPag (450 barg)
Ingress protection IP66 (MiniDIN); IP65 (M12)
Housing 316 stainless steel
Length 133 mm (MiniDIN) or 156 mm (M12), diameter 45 mm

Typical applications of SF82-TX in Oman and the GCC

  • Refrigeration dryers and membrane or adsorption dryers.
  • Medical and surgical air and breathing air.
  • Additive manufacturing and plastic injection moulding.
  • Portable dew-point checkers.

In Oman and across the GCC, moisture measurement matters wherever gas has to stay dry: gas gathering and processing plants, LNG and gas-to-power facilities, refineries and petrochemical complexes, desalination and utility compressed-air systems, and industrial gas and hydrogen users. High ambient temperatures and humidity make dryer performance and sensor drift a real operating cost, so a transmitter such as SF82-TX is usually specified against a defined dew-point or ppmV target and a documented calibration.

Selection and compatibility notes

SF82-TX is suited to compressed air and similar applications with a dew-point range down to minus 60 degrees Celsius. For ranges to minus 100 or below, the Easidew family such as EA2-TX is the appropriate choice.

Confirm four things before ordering SF82-TX: the dew-point or ppmV range you need, the process connection and sample handling arrangement, the hazardous-area certification that your site requires, and the electrical interface of your control system. Because Michell builds many variants from one parent code, quote the complete configured code from the order-code sheet where one applies, and tell us the operating pressure so that ppmV conversions are programmed correctly.

Installation and commissioning of SF82-TX

Accessories on the order-code sheet include SB-12 and SB34-SF82 stainless steel sample blocks, KF40 adaptor flanges, BS-12-PK5 bonded seals and cables EA2-CAB and EA2-M12-CAB in several lengths.

Mount the sensor in a sampling arrangement that delivers a clean, representative gas stream at a controlled flow, keep sample lines short and use stainless steel or other low-adsorption tubing, and avoid dead legs, because trace moisture adsorbs on tubing walls and slows the response. Wire the 4-20 mA loop with screened cable, check loop supply and load against the datasheet limits, and allow the sensor to stabilise on dry gas before judging the first readings. Record the as-found reading and the calibration certificate number at commissioning.

Maintenance, calibration and service

SF82-TX-Recal is the recalibration service listed by the manufacturer, with a traceable certificate.

Ceramic moisture sensors are stable, but periodic verification keeps a dryer control loop honest. Plan recalibration or sensor exchange at the interval set by your quality system, inspect the sensor guard and seals at each visit, and replace guards that are clogged by particulates or contaminated by oil mist. If a reading drifts, check the sample system for leaks and condensate before suspecting the sensor.

Related products and ordering notes for SF82-TX

  • EA2-TX-M12: Easidew with extended range.
  • EA2-OL: Easidew Online hygrometer.
  • EA34-TX: Easidew 34.

When you request SF82-TX, tell us whether the item is for a new installation, a like-for-like replacement or a spares stock, because that changes which accessories and documents are worth adding to the same quotation. Our team can also check related codes from the same order-code sheet so that one RFQ covers the transmitter or analyzer, its consumables and its calibration needs.

Frequently asked questions about SF82-TX

  • What is SF82-TX? SF82-TX is the manufacturer parent code for the SF82 industrial dew-point transmitter with 4-20 mA output and optional Modbus RTU.
  • What does SF82-TX suit? It suits dew-point monitoring in compressed air dryers, breathing air and similar applications that need a range down to minus 60 degrees Celsius.
  • How fast does SF82-TX respond? The datasheet lists 6 seconds from minus 60 to minus 20 degrees Celsius dew point and 40 seconds from minus 20 to minus 60 degrees, at room temperature and 1 bara.
  • What should I send with an RFQ for SF82-TX? Send the part number SF82-TX, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.

Documents and quotation

A manufacturer document is available for the product family of SF82-TX and we can send it with your quotation where the family datasheet applies. To request pricing and lead time, send an RFQ to Seven Star LLC with the part number SF82-TX, the quantity, the full configuration or host-instrument details, the delivery location and any certificate requirements such as material certificates or calibration documents. We will confirm availability and respond with a quotation for SF82-TX in writing.

Datasheets & Documents
  • PDF Datasheet Michell SF82-TX SF82 Industrial Dew-Point Transmitter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Michell Instruments is a British manufacturer of humidity and dew point instruments, founded in 1974 in Cambridge, England, by Andrew Michell and incorporated on 12 September 1974. It worked with Cambridge University scientists on an aluminium oxide dew point sensor and later developed chilled mirror hygrometers and hydrocarbon dew point analysers. Michell is based in Ely, Cambridgeshire, and is part of Process Sensing Technologies (PST).

Seven Star LLC lists Michell dew-point transmitters, the Condumax II analyzer and its replacement sensor parts, and supplies them to gas plants and compressed air users in Oman by exact order code.

MICHELL Instruments company profile

Founded 1974, Cambridge, England, by Andrew Michell
Headquarters Ely, Cambridgeshire, United Kingdom, since 2007
Ownership Process Sensing Technologies (PST)
Technology Ceramic and aluminium oxide moisture sensors, chilled mirror dew point, Condumax hydrocarbon dew point (licensed from Shell)
Product families Easidew and Promet dew point transmitters, S8000 and Optidew chilled mirror hygrometers, Condumax II hydrocarbon dew point analysers, MDM300 portable dew point meters, oxygen analysers

Milestones

  • 1974: Andrew Michell founds Michell Instruments in Cambridge.
  • 2007: The company moves to Ely, Cambridgeshire.
  • 2024: Michell marks 50 years, now as part of PST.

Michell product families on this page

The Condumax II is an automatic hydrocarbon dew-point analyzer for natural gas. Several of its parts are listed separately: the CD2-SCR-002 hydrocarbon dew-point sensor cell, the CD2-WDC-002 water dew-point sensor assembly and the CD2-SX-WDC-002, which is the exchange version of that water dew-point sensor. The Easidew line is represented by the Easidew EA2 dew point transmitter and by the Easidew PRO I.S., an intrinsically safe moisture transmitter for hazardous areas. A ceramic impedance moisture sensor module is also listed, the sensing element behind these transmitters.

Where Michell analyzers are used

Hydrocarbon and water dew point are contract quality parameters for natural gas, so the Condumax II is found at gas processing plants, pipeline entry points and custody transfer stations. Easidew transmitters monitor dryers for instrument air and industrial gases, glove boxes, and dry gas feeds to processes that cannot tolerate water.

MICHELL Instruments products we list

Family Examples
Gas Analyzer Systems Easidew PRO I.S. Intrinsically Safe Mois…, Michell CD2-WDC-002 Water Dew-Point Sens…, Michell Condumax II Hydrocarbon Dew-Poin…, Easidew EA2 Dew Point Transmitter, Michell OptiPEAK TDL600 Moisture in Natu…, Michell Promet EExd Process Moisture Ana…, Michell S8000 Precision Chilled Mirror H…
Gas Analyzer Accessories MICHELL CD2-SX-WDC-002 Water Dew-Point S…, Michell Ceramic Impedance Moisture Senso…, Michell Condumax II CD2-SCR-002 Hydrocar…

Ordering Michell parts: what we need

For Condumax II parts send the analyzer serial number and the part code, such as CD2-SCR-002, and state if a new assembly or the exchange item is wanted. For Easidew transmitters we need the measuring span in dew point or ppm, the process connection thread, the output signal, the operating pressure, the gas and the area certification. A photo of the label on the old transmitter usually answers most of these in one go.

Facts checked against UK Companies House records and PST's Michell 50-year material, October 2026.

FAQ

Questions about the Michell SF82-TX SF82 Industrial Dew-Point

Answers from our engineering team on installation, compatibility and integration.

01What is SF82-TX?
SF82-TX is the manufacturer parent code for the SF82 industrial dew-point transmitter with 4-20 mA output and optional Modbus RTU.
02What does SF82-TX suit?
It suits dew-point monitoring in compressed air dryers, breathing air and similar applications that need a range down to minus 60 degrees Celsius.
03How fast does SF82-TX respond?
The datasheet lists 6 seconds from minus 60 to minus 20 degrees Celsius dew point and 40 seconds from minus 20 to minus 60 degrees, at room temperature and 1 bara.
04Can Seven Star LLC supply SF82-TX in Oman?
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.
05What should I send with an RFQ for SF82-TX?
Send the part number SF82-TX, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.