- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Legrand
Legrand 406441 DX3-IS 2-Pole 63 A Isolating Switch
Description
406441: Legrand DX3-IS 2-pole 63 A isolating switch, explained
The Legrand 406441 is a DX3-IS isolating switch with two poles, a rated current of 63 A and a rated voltage of 400 V AC, utilisation category AC-22A. It provides fully visible breaking, so the position of the handle shows the true state of the contacts, and it is two modules wide (35.4 mm). It is built as a main switch and safety switch for distribution boards, with IP20 terminals, a label holder and DIN rail clips. Seven Star LLC supplies 406441 in Oman and the GCC as an independent supplier in Muscat.
An isolating switch has no overcurrent protection. Its job is to open the circuit and to give a visible isolation gap so that work can be done safely downstream, so it must always be fed through a circuit breaker or fuse sized for the circuit.
Decoding the description of 406441
| Element | Value | Meaning |
|---|---|---|
| DX3-IS | Range | Legrand modular isolating switches, 1 module per pole |
| 2 pole | Poles | Two-pole disconnection for a phase and neutral circuit |
| 63 A | Rated current | Rating at 400 V AC under AC-22A |
| Visible break | Indication | Handle position reflects contact position |
| Ref. 406441 | Catalogue number | Reference to quote |
Technical specifications for 406441
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Legrand / 406441 (DX3-IS isolating switch, 2 pole, 63 A) |
| Poles / rated current | 2 / 63 A |
| Rated operational voltage | 400 V AC for 2, 3 and 4 poles (250 V AC for 1 pole), 50/60 Hz |
| Utilisation category | AC-22A (mixed load, frequent operation); AC-23A inductive per IEC/EN 60947-3 |
| Insulation Ui / Uimp | 500 V / 6 kV; pollution degree 3 |
| Short-circuit data | Icw 2 kA and Icm 3 kA (63 A); conditional short-circuit current 4.5 kA with a fuse of the same rating |
| Width | 35.4 mm (two modules) |
| Conductors | Rigid 1.5–35 mm² (1 conductor); flexible 1.5–25 mm² |
| Terminals | Cage terminals, depth 14 mm, recommended torque 3 Nm |
| Protection | IP20 on terminals, class II, IK04 |
| Endurance | 200,000 mechanical operations; 20,000 at AC-22A; 1,500 at AC-23A |
| Power dissipation | About 1.67 W per pole at 63 A |
| Temperature | Operating -25 to 70 °C; storage -40 to 70 °C |
| Mounting / locking | 35 mm DIN rail; padlock in open or closed position; sealing possible |
How the 406441 isolates a circuit
The switch is a manual two-position device: O-OFF in white on green and I-ON in white on red. Its contacts are fully visible through the front, so the electrician can see the gap, and the handle can be padlocked in either position with the Legrand lock-out accessory. A visible break is important because relying on a handle position alone is not always accepted in permit-to-work routines.
The data sheet describes the rating by IEC/EN 60947-3 and lists 63 A under AC-22A with 20,000 operations under load, and 1,500 operations at AC-23A for inductive loads. The device is also listed for direct current use at 48 V, or 110 V with two poles wired in series, according to the data sheet.
Where 406441 fits and related parts
Install 406441 ahead of a single-phase sub-board or a heater circuit as a local isolator. The 3-pole sibling is 406461 for three-phase boards. Upstream protection can be any DX3 breaker or a gG fuse; for 63 A at 400 V the data sheet lists coordinated short-circuit values up to 10 kA with DX3 breakers and 16 kA with a 63 A gG or aM fuse.
Selection checklist for 406441
- Poles: two, for phase and neutral; use 3 or 4 poles for three-phase boards.
- Rating: 63 A under AC-22A; check the load type and frequency of operation.
- Back-up protection: fuse or MCB upstream; the switch does not clear faults.
- Conductor: up to 35 mm² rigid or 25 mm² flexible copper.
- Locking: padlock accessory for lock-out and tag-out.
- Environment: IP20, pollution degree 3; mount in a closed board.
Installation and maintenance of 406441
Fit the switch on the 35 mm rail, connect conductors to the cage terminals with a Pozidriv no. 2 screwdriver and tighten to about 3 Nm. For 40 and 63 A devices the terminals have shutters that stop a conductor entering with the screw closed. The device may be replaced in the middle of a busbar-fed row without disconnecting neighbours. Mark the label with the circuit name and record 406441 in the schedule. Operate the switch occasionally to keep the contacts clean.
Typical applications in Oman and the GCC
Local isolators of this type are used in site cabins, small workshops, accommodation blocks, air-conditioning supplies and temporary boards across Oman and the GCC. In high ambient temperatures keep clearance to heat sources and remember that the switch dissipates a little over 1.5 W per pole at full load.
Information to send with an RFQ for 406441
- Reference 406441 and the quantity, including spares for panel maintenance.
- Number of poles (2) and rated current (63 A).
- Type of load and upstream protection.
- Lock-out accessories needed.
- Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
- Any documents you need with the quotation, such as a technical data sheet or a compliance statement.
Storage, handling and spares for the Legrand 406441
Keep Legrand 406441 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.
- Check the label and order code on every unit against the drawing before it goes into the panel.
- Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
- Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
- Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.
When you plan spares for a project, group the Legrand 406441 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.
Documents and quotation
The Legrand technical data sheet that covers 406441 is attached on this page. It gives the range table, dimensions, curves and accessories, so check its notes against your design before you order.
To request a quotation, send reference 406441, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer; we will confirm availability and lead time for your order.
Other Models in the Legrand Dx3 Is Range
Seven Star LLC supplies models from the Legrand Dx3 Is range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Legrand 406441 DX3-IS 2-Pole 63 A Isolating Switch | Circuit Breakers | You are viewing this model |
| Legrand 406461 DX3-IS 3-Pole 63 A Isolating Switch | Circuit Breakers | View details |
Datasheets & Documents
- Datasheet Legrand 406441 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Legrand is a French maker of electrical and digital building infrastructure, headquartered in Limoges. Its roots lie in a nineteenth-century porcelain workshop in Limoges, and it grew into one of the largest makers of wiring devices, circuit protection, cable management and data centre products. Legrand is listed on Euronext Paris and sells under brands including Legrand, Bticino and Cablofil.
Seven Star LLC, an independent supplier in Muscat, lists Legrand circuit breakers for electrical contractors and panel builders in Oman and the GCC, at present a DX3 4-pole miniature circuit breaker rated C32.
Legrand company profile
| Headquarters | Limoges, France |
|---|---|
| Listing | Euronext Paris |
| Brands | Legrand, Bticino, Cablofil, Zucchini |
| Product families | DX3 miniature circuit breakers and RCDs, wiring devices, cable trays, busbar trunking, UPS |
Legrand DX3 circuit breakers
DX3 is the Legrand family of modular protection devices for DIN rail mounting. The item on our site is a 4-pole MCB with a C tripping curve and a 32 A rated current. Three things besides the pole count define a breaker of this kind: the curve, the rated current and the breaking capacity printed on the front. Legrand catalogs DX3 breakers in 6000 A and 10000 A versions under separate references.
Ordering Legrand breakers: what we need
Send the Legrand catalog number printed on the device, a six-digit reference, where it is legible. Otherwise give the number of poles, the curve, the rated current, the breaking capacity and the voltage. Mention any auxiliary contact or residual current add-on module fitted beside the breaker, and the board type.
Facts checked against Legrand's published corporate information, October 2026.
Browse Legrand products by category: Circuit Breaker.
FAQ
Questions about the Legrand 406441 DX3-IS 2-Pole 63 A Isolating Switch
Answers from our engineering team on installation, compatibility and integration.
01What is 406441?
It is a Legrand DX3-IS two-pole isolating switch rated 63 A at 400 V AC, utilisation category AC-22A, with fully visible breaking and IP20 terminals.
02Does 406441 protect against overload?
No. It only opens and isolates the circuit. A circuit breaker or fuse must protect the circuit upstream, and the data sheet lists coordination values.
03Can 406441 be locked off?
Yes. The data sheet allows padlocking in the open and closed positions using the DX3 padlock support and a 5 mm or 6 mm padlock, and sealing is possible.
04What conductors fit 406441?
Rigid copper from 1.5 to 35 mm² and flexible copper from 1.5 to 25 mm² fit the cage terminals, with a recommended torque of 3 Nm.
05Can 406441 be used on DC?
The data sheet states direct current use at 48 V, or 110 V with two poles wired in series. Check the data sheet before using it on higher DC voltages.


















Reviews
There are no reviews yet.