Brand:

Legrand 406461 DX3-IS 3-Pole 63 A Isolating Switch

Description

406461: Legrand DX3-IS 3-pole 63 A isolating switch, three-phase main switch

The Legrand 406461 is a DX3-IS three-pole isolating switch rated 63 A at 400 V AC under utilisation category AC-22A. Each pole is one module wide, so the device takes 53.1 mm of rail. It gives fully visible breaking, IP20 protection for the terminals and the same ergonomic ON/OFF handle as the rest of the DX3-IS range, and the catalogue lists it as suitable for main-switch and safety-switch duty in distribution boards. Seven Star LLC supplies 406461 in Oman and the GCC as an independent supplier in Muscat.

The device switches three phases without a neutral pole, which is the correct choice for three-wire loads such as motors and heaters, or where the neutral is bonded or handled separately. Where the neutral must be isolated too, the 4-pole DX3-IS versions in the same data sheet apply.

Reading the 406461 description

Element Value Meaning
DX3-IS Range Modular isolating switches, one module per pole
3 pole Poles Three phases isolated together
63 A, 400 V Rating AC-22A at 400 V AC
Visible break Indication Contacts visible through the front window
Ref. 406461 Catalogue number Reference to quote

Technical specifications for 406461

Parameter Specification
Manufacturer / part number Legrand / 406461 (DX3-IS isolating switch, 3 pole, 63 A)
Poles / rated current 3 / 63 A
Rated operational voltage 400 V AC, 50/60 Hz
Utilisation category AC-22A mixed load, frequent operation; AC-23A inductive per IEC/EN 60947-3
Insulation Ui / Uimp 500 V / 6 kV; pollution degree 3
Short-circuit data Icw 2 kA and Icm 3 kA (63 A); conditional current 4.5 kA with a fuse of the same rating
Width 53.1 mm (three modules)
Conductors Rigid 1.5–35 mm² (1 conductor), 2 x 1.5–16 mm²; flexible 1.5–25 mm²
Terminals Cage terminals with shutters, depth 14 mm, torque 3 Nm recommended (2 to 3.5 Nm)
Handle force 18 N to switch off and 50 N to switch on for three poles
Endurance 200,000 mechanical operations; 20,000 at AC-22A; 1,500 at AC-23A
Power dissipation About 1.67 W per pole, so about 5 W at 63 A
Protection IP20, class II, IK04; UL94 V2 plastics, glow-wire 960 °C
Mounting / locking 35 mm DIN rail; padlock open or closed; sealing possible

How the 406461 opens three phases together

All three poles are operated by one handle, so the isolation is simultaneous. The data sheet gives opening and closing forces of 18 N and 50 N for the three-pole version, a figure that tells you the switch needs a firm hand and should be operated with the board door closed on the handle where one is fitted. The contact status is shown on the handle in white on green for OFF and white on red for ON.

The insulation values are suitable for 400 V boards: Ui 500 V and Uimp 6 kV. The switching-on short-circuit capacity is 4.5 kA for the 63 A device, but protection against faults depends on the upstream device; the data sheet lists coordination up to 10 kA with DX3 and DPX3 breakers and 16 kA with 63 A gG or aM fuses at 400 V.

Where 406461 fits and related parts

Use 406461 as a local isolator for a motor, a compressor, a pump or a three-phase sub-board. The two-pole sibling is 406441. Upstream breakers such as DX3 four-pole MCBs 409071 or 407929 can feed the isolator, and RCCB or RCBO devices such as 411761 or 411192 can protect the downstream circuit. Padlocking the switch in the open position supports lock-out and tag-out procedures.

Selection checklist for 406461

  • Poles: three, no neutral; choose four poles when the neutral must be isolated.
  • Load: 63 A in AC-22A; use a contactor for frequent switching of motors.
  • Protection: upstream breaker or gG/aM fuse; the switch has no trip function.
  • Conductor: up to 35 mm² rigid or 25 mm² flexible copper per terminal.
  • Locking: padlock accessory and sealing available.
  • Space: 53.1 mm of rail and a 14 mm terminal depth.

Installation and maintenance of 406461

Clip the switch on the rail, connect the supply at the top or the bottom and tighten the cage terminals to 3 Nm. The switch can be changed in the middle of a busbar row without disconnecting neighbours. Label the load, fit the padlock accessory where lock-out is required and record 406461 in the board schedule. During annual maintenance operate the switch several times, inspect the terminals and look for discolouration.

Typical applications in Oman and the GCC

Local isolators for pumps, HVAC compressors, fans and workshop machines are common in Oman and the GCC and are often mandatory next to rotating equipment. In outdoor panels with high summer heat the operating range of -25 to 70 °C is wide enough, but the cabinet should be ventilated and dust sealed.

Information to send with an RFQ for 406461

  • Reference 406461 and the quantity, including spares for panel maintenance.
  • Number of poles (3) and rated current (63 A).
  • Load type, upstream protection and whether lock-out is needed.
  • Board layout and busbar type.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as a technical data sheet or a compliance statement.

Storage, handling and spares for the Legrand 406461

Keep Legrand 406461 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.

  • Check the label and order code on every unit against the drawing before it goes into the panel.
  • Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
  • Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
  • Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.

When you plan spares for a project, group the Legrand 406461 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.

Documents and quotation

The Legrand technical data sheet that covers 406461 is attached on this page. It gives the range table, dimensions, curves and accessories, so check its notes against your design before you order.

To request a quotation, send reference 406461, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer; we will confirm availability and lead time for your order.

Other Models in the Legrand Dx3 Is Range

Seven Star LLC supplies models from the Legrand Dx3 Is range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Legrand 406441 DX3-IS 2-Pole 63 A Isolating SwitchCircuit BreakersView details
Legrand 406461 DX3-IS 3-Pole 63 A Isolating SwitchCircuit BreakersYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Legrand is a French maker of electrical and digital building infrastructure, headquartered in Limoges. Its roots lie in a nineteenth-century porcelain workshop in Limoges, and it grew into one of the largest makers of wiring devices, circuit protection, cable management and data centre products. Legrand is listed on Euronext Paris and sells under brands including Legrand, Bticino and Cablofil.

Seven Star LLC, an independent supplier in Muscat, lists Legrand circuit breakers for electrical contractors and panel builders in Oman and the GCC, at present a DX3 4-pole miniature circuit breaker rated C32.

Legrand company profile

Headquarters Limoges, France
Listing Euronext Paris
Brands Legrand, Bticino, Cablofil, Zucchini
Product families DX3 miniature circuit breakers and RCDs, wiring devices, cable trays, busbar trunking, UPS

Legrand DX3 circuit breakers

DX3 is the Legrand family of modular protection devices for DIN rail mounting. The item on our site is a 4-pole MCB with a C tripping curve and a 32 A rated current. Three things besides the pole count define a breaker of this kind: the curve, the rated current and the breaking capacity printed on the front. Legrand catalogs DX3 breakers in 6000 A and 10000 A versions under separate references.

Ordering Legrand breakers: what we need

Send the Legrand catalog number printed on the device, a six-digit reference, where it is legible. Otherwise give the number of poles, the curve, the rated current, the breaking capacity and the voltage. Mention any auxiliary contact or residual current add-on module fitted beside the breaker, and the board type.

Facts checked against Legrand's published corporate information, October 2026.

FAQ

Questions about the Legrand 406461 DX3-IS 3-Pole 63 A Isolating Switch

Answers from our engineering team on installation, compatibility and integration.

01What is 406461?
It is a Legrand DX3-IS three-pole isolating switch rated 63 A at 400 V AC, category AC-22A, with fully visible breaking and a one-module-per-pole body.
02How wide is 406461?
Each pole takes 17.7 mm, so the three-pole device is 53.1 mm wide, with 14 mm deep cage terminals for conductors up to 35 mm² rigid.
03What short-circuit data does 406461 have?
The data sheet lists Icw 2 kA, Icm 3 kA and a conditional current of 4.5 kA with a fuse of the same rating, with coordination values for DX3 and DPX3 breakers.
04Does 406461 have a neutral pole?
No, it has three poles. Use a four-pole DX3-IS from the same data sheet where the neutral must be isolated together with the phases.
05How is 406461 different from 406441?
406461 has three poles for three-phase circuits and is 53.1 mm wide, while 406441 has two poles for phase-and-neutral circuits and is 35.4 mm wide.