- Automation & ControlView all 2,536 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- CCTV & Security
- Motor Soft Starters
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Siemens
Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 24V/10A Power Supply
Description
6EP3334-8SB00-0AY0: SITOP PSU8200 24 V / 10 A stabilized power supply, explained
The Siemens 6EP3334-8SB00-0AY0 is a metal-housed SITOP modular supply with power boost, selectable short-circuit behaviour and three status LEDs. It is the 24 V DC, 10 A version in the catalog. The 10 A unit of the PSU8200 single-phase group is 55 mm wide and weighs about 1 kg, with efficiency up to 94 % and a heat loss of about 18 W. It supports Power Boost and adjustable short-circuit behaviour.
The article number is simply the catalog identifier for this rating of the SITOP PSU8200 group; it does not describe the build in a way that can be decoded digit by digit without the manufacturer’s tables, so always quote the full number 6EP3334-8SB00-0AY0 when ordering. Seven Star LLC supplies the 6EP3334-8SB00-0AY0 in Oman and the GCC as an independent supplier in Muscat.
Technical specifications of the 6EP3334-8SB00-0AY0
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Siemens / 6EP3334-8SB00-0AY0 |
| Product line | SITOP PSU8200 (SITOP modular line) |
| Rated output | 24 V DC, 10 A |
| Input | 1-phase AC 120/230 V, automatic range selection (85 – 132 V / 170 – 264 V) |
| Input current | 4 A at 120 V; 1.9 A at 230 V |
| Switch-on current limit (+25 °C) | max. 10 A |
| Mains buffering at rated load | min. 35 ms; at Vin = 120/230 V |
| Output voltage adjustment | 24 – 28.8 V via potentiometer |
| Output tolerance (static) | ±3 % |
| Residual ripple (peak-peak, max.) | 50 mV |
| Efficiency at rated load, approx. | 94 % |
| Power loss at rated load, approx. | 18 W |
| Start-up delay, max. | 1 s |
| Short-circuit / overload response | Selectable: constant-current characteristic (approx. 12 A) or latching shutdown |
| Parallel operation for more power | Yes; switchable |
| Signalling output | Relay contact (normally open, 60 V DC/0.3 A) for the output-voltage-OK message |
| Protection class | Class I |
| Approvals listed | cULus listed (UL 508, CSA C22.2 No. 107.1); CB; marine approvals listed: GL, ABS |
| Hazardous-area listings | IECEx / ATEX category 3G (Ex nA) and cCSAus Class I Div. 2 listings appear in the catalog for this series; confirm the marking and temperature class on the exact unit |
| Ambient temperature (operation) | −25 – +70 °C, natural convection |
| Derating note (catalog) | +60 – +70 °C: Derating 2%/K |
| Humidity class | Climate class 3K3, no condensation |
| EMC | Emissions EN 55022 Class B; noise immunity EN 61000-6-2 |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 55 × 125 × 125 mm |
| Weight, approx. | 1 kg |
| Mounting | Snap-on to DIN rail EN 60715 35 × 7.5/15; side-by-side mounting permitted |
| MTBF at 40 °C | 1 292 102 h (catalog value) |
Values are taken from the manufacturer’s SITOP catalog (KT 10.1, 2016) and apply at rated input voltage and +25 °C unless stated otherwise; check the current data sheet of the exact unit before design freeze.
How the 6EP3334-8SB00-0AY0 regulates and protects its 24 V output
The 6EP3334-8SB00-0AY0 is a switch-mode converter in a slim metal housing with efficiency of 94 %. Power Boost supplies up to three times the rated current for 25 ms so that a downstream miniature breaker can trip on a short circuit, and the unit can deliver 150 % for short periods.
The short-circuit response can be chosen between a constant-current characteristic and latching shutdown; parallel operation can be switched to a mode with symmetrical load sharing. Three status LEDs show the operating state, and a relay contact carries the 24 V OK message.
Where the 6EP3334-8SB00-0AY0 fits in the control system
In a typical cabinet the 6EP3334-8SB00-0AY0 sits right behind the incoming breaker and feeds a 24 V distribution rail. Other members of the SITOP PSU8200 group in the catalog are 6EP3333-8SB00-0AY0, 6EP3436-8SB00-0AY0; they share the same operating concept but differ in rated current, width and weight, so they are not interchangeable in a fixed layout without checking space and breaker coordination.
For this series the catalog lists the SITOP PSE201U buffer module 6EP1961-3BA01, the PSE202U redundancy modules (6EP1961-3BA21, 6EP1962-2BA00, 6EP1964-2BA00), the PSE200U selectivity modules in 3 A and 10 A versions and device labeling plates 3RT1900-1SB20.
As an independent supplier, Seven Star LLC can help you match the supply to the rest of the bill of materials, for example by checking that the redundancy or buffer module suits the output current, but the final electrical design remains with your engineering team.
Selection and ordering checklist for the 6EP3334-8SB00-0AY0
- Load current: add the continuous demand of all 24 V consumers and compare it with the 10 A rating of the 6EP3334-8SB00-0AY0, leaving margin for inrush and future additions.
- Mains: confirm that the site supply matches the input data (1-phase AC 120/230 V, automatic range selection (85 – 132 V / 170 – 264 V)) and check the input current figures given in the specification table.
- Cabinet temperature: the operating range is -25 – +70 °C and derating applies at the upper end; compare it with the worst-case temperature inside the enclosure.
- Space: allow 55 mm width on the rail plus 125 mm of height and 125 mm of depth; vertical clearance for convection is required.
- Protection: use the 1-phase breaker values from the catalog (from 6 A characteristic C or 10 A characteristic B).
- Signalling: decide whether the relay contact will be wired to your monitoring system.
- Add-ons: decide early whether a redundancy, buffer or selectivity module is needed; the catalog lists compatible modules for the series.
- Use it for single-phase 24 V loads up to 10 A in cabinets where slimness and efficiency matter; the catalog lists derating of 2 % per kelvin above +60 °C.
Installation, commissioning and maintenance
Mount the 6EP3334-8SB00-0AY0 on a 35 mm DIN rail with the vertical clearance for convection; no lateral clearance is required. Choose the short-circuit mode (constant current or latching shutdown) and decide whether parallel operation will use symmetrical load sharing.
Wire the input, the output and the signalling contact. Use the three LEDs and the relay contact for commissioning and for condition monitoring in operation.
Wire the signalling and remote contacts if your plant monitoring uses them, and decide on constant current (approx. 12 A) versus latching shutdown.
- Inspect terminals for tightness and discolouration at each shutdown.
- Clean dust from the vents with dry compressed air; do not block the convection path.
- Compare the output voltage with the value recorded at commissioning.
- Keep one spare of the same article number for critical cabinets, since lead times for individual SITOP models can vary.
Typical applications in Oman and the GCC
In Oman and the GCC, the 6EP3334-8SB00-0AY0 is used in compact control cabinets for pumps, fans and process skids, where slimness, efficiency and the operating range (-25 – +70 °C) matter. The high efficiency (94 %) reduces the heat that has to be removed from cabinets in desert conditions.
It fits controls for pumps and fans, process-skid panels and harsh-climate enclosures.
SITOP PSU8200 group at a glance
The table lists the SITOP PSU8200 versions found in the catalog so you can compare ratings and size before selecting the 6EP3334-8SB00-0AY0.
| Article number | Output | Width | Weight | Efficiency |
|---|---|---|---|---|
| 6EP3333-8SB00-0AY0 | 24 V / 5 A | 45 mm | 0.8 kg | 93 % |
| 6EP3334-8SB00-0AY0 | 24 V / 10 A | 55 mm | 1 kg | 94 % |
| 6EP3436-8SB00-0AY0 | 24 V / 20 A | 70 mm | 1.2 kg | 94 % |
Information to send with an RFQ for the 6EP3334-8SB00-0AY0
- Exact article number (6EP3334-8SB00-0AY0) and quantity, including whether you need identical replacement or an equivalent.
- Supply system at site: voltage, frequency and number of phases, plus whether a DC feed is possible.
- Output requirement: voltage, continuous current, peak or inrush loads and the number of parallel units if redundancy is planned.
- Ambient conditions inside the cabinet: maximum temperature, dust, humidity and any hazardous-area classification.
- Required accessories, for example redundancy, buffer or selectivity modules, terminals or labeling plates.
- Delivery location (Muscat or elsewhere in Oman or the GCC) and required delivery time.
- Any document requirement such as a datasheet or manual in English.
Documents and quotation
The official Siemens SITOP PSU8200 1ph manual (edition 11.2014, C98130-A7633-A1-3, English) is attached on this page as a PDF and covers the Siemens 6EP3334-8SB00-0AY0 order number. It gives the input and output data, the derating curves, the overload and short-circuit behaviour, the signalling contacts, the mounting clearances, the connection diagram and the approvals for the 24 V 5 A and 10 A single-phase units. Check the input voltage, the output current and the mounting space against your panel before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier based in Muscat and is not affiliated with the manufacturer. To request a quotation for the 6EP3334-8SB00-0AY0, send the information listed above through the request-for-quotation form or by email; we will reply with availability and lead time.
Other Models in the Siemens Sitop Psu8200 Range
Seven Star LLC supplies models from the Siemens Sitop Psu8200 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Siemens 6EP3333-8SB00-0AY0 SITOP PSU8200 24V/5A Power Supply | Power Modules | View details |
| Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 24V/10A Power Supply | Power Modules | You are viewing this model |
| Siemens 6EP3436-8SB00-0AY0 SITOP PSU8200 24V/20A Power Supply | Power Modules | View details |
Datasheets & Documents
- Datasheet Siemens SITOP PSU8200 1ph Manual (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Siemens is the German technology group whose industrial products include SIMATIC controllers and HMIs, SINAMICS drives, SIRIUS and SENTRON switching and protection devices, SIPROTEC protection relays, SITRANS process instruments, SCALANCE networks and process analysers. It was founded in Berlin on 12 October 1847 by Werner von Siemens and the precision mechanic Johann Georg Halske as Telegraphen-Bauanstalt von Siemens & Halske, to build Siemens's newly designed pointer telegraph. Siemens AG is headquartered in Munich and listed on the Frankfurt Stock Exchange; its energy business was spun off as Siemens Energy in 2020.
Siemens company profile
| Founded | 12 October 1847, Berlin, Germany, as Telegraphen-Bauanstalt von Siemens & Halske, with 10 employees |
|---|---|
| Founders | Werner von Siemens (1816–1892) and Johann Georg Halske (1814–1890) |
| First product | The pointer telegraph designed by Werner von Siemens |
| Headquarters | Munich, Germany (Siemens AG) |
| Ownership | Public company listed in Frankfurt; Siemens Energy (2020) and Siemens Healthineers are separately listed companies |
| Businesses acquired that appear in our range | Moore Products (bought in 2000; APACS and QUADLOG control systems), Applied Automation (Maxum process gas chromatographs); small industrial gas turbines such as the SGT-300 came with Alstom's industrial turbine business in 2003 |
| Product families | SIMATIC S7 PLCs, ET 200 distributed I/O and HMI panels, TIA Portal software, SINAMICS drives, SIMOTICS motors, SIRIUS and SENTRON low voltage devices, SIVACON switchboards, SIPROTEC relays, SITRANS instruments, SCALANCE network components, building technology valves and sensors |
Milestones
- 1847: Siemens & Halske starts work in Berlin with 10 employees.
- 1848: The company wins the contract for Europe's first long-distance telegraph line, Berlin to Frankfurt am Main.
- 1856: 330 employees, two-thirds of them working on telegraph networks in Russia.
- 1866: Werner von Siemens describes the dynamo-electric principle, the basis of the electric generator.
- 1958 onwards: The SIMATIC name is used for Siemens industrial automation; S7 PLCs follow in the 1990s and S7-1500 in 2012.
- 2020: Siemens Energy is spun off and listed separately.
Choosing Siemens automation products
A Siemens order number (MLFB) identifies the exact product: 6ES7 is SIMATIC automation, 6AV is HMI, 6GK is industrial communication, 6SL is SINAMICS drives, 3R is SIRIUS control and 5SY is SENTRON miniature circuit breakers. For PLCs, S7-1200 is the compact controller for small machines, S7-1500 is the current mid-to-high range controller, and S7-300 and S7-400 are older platforms still running in many plants; S7-300 is being phased out, so spares and migration to S7-1500 are common requests. When replacing a CPU or module, the full order number including the version digits matters, because firmware and hardware versions affect compatibility with the existing project.
Where Siemens products are used
In Oman and the GCC, Siemens automation runs in oil and gas, power and desalination plants, water networks, cement and process industries. Maxum gas chromatographs analyse gas composition in gas plants and refineries, SIPROTEC relays protect substations, SGT-300 turbines drive generators and compressors, and Siemens building valves are used in HVAC systems.
Siemens products we list
| Family | Examples |
|---|---|
| SIMATIC controllers and I/O | S7-1500, CPU 1515-2 PN, S7-1200, CPU 1214C, S7-300, S7-400H CPU 412-5H, ET 200SP, IM 153-2 |
| HMI and networking | KTP700 Basic, TP700 Comfort, TP1200 Comfort, SCALANCE XC208, SCALANCE WAM766, PROFIBUS OLM |
| Drives, motors and power distribution | SINAMICS G120C, SINAMICS G120X, 1LA7 motor, SIVACON S8, SIPROTEC 7SJ85, 5SY4510-7 MCB |
| Process instruments | SITRANS P320, MAG 5100W, SITRANS TH320, SITRANS TS500, SITRANS TR200 |
| Maxum II analyser spares | FID 302A detector, FPD II assembly, filament detector, Model 50 valve, SYSCON kit, air bath heater |
| APACS and QUADLOG spares | QLCCM24AAN, QLSAMBAN, QLSDM024DCCBN, 39SAMCAN, 16137-151 M-BUS cable |
| Building technology | VPI46 PICV, VPF44, QFM1660 sensor |
Ordering Siemens products: what we need
Send the full order number from the label (for example 6ES7214-1AG40-0XB0) and, for PLC and HMI parts, the hardware and firmware version (FS and V numbers). For Maxum II and APACS spares, send the Siemens part number such as 2021651-002. For drives, add the motor power and supply voltage.
Frequently requested Siemens models: Siemens IM 155-6 PN ST ET 200SP Interface Module 6ES7155-6AU02-0BN0, Siemens SGT-300 Industrial Gas Turbine.
Facts checked against Siemens's published history timeline, October 2026.
FAQ
Questions about the Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 24V/10A
Answers from our engineering team on installation, compatibility and integration.
01What is Power Boost on the 6EP3334-8SB00-0AY0?
Power Boost is a brief current reserve of up to three times the rated current for 25 ms, intended to trip downstream miniature circuit breakers on a short circuit. The unit also supports 150 %% of rated current for short periods.
02Can the 6EP3334-8SB00-0AY0 be connected in parallel?
Yes. The catalog allows parallel connection to increase power with up to 2 units (note: switchable). For redundancy rather than more power, the SITOP PSE202U redundancy modules decouple the supplies; match the module rating to the output current before ordering.
03What ambient temperature range does the 6EP3334-8SB00-0AY0 support?
The catalog gives an operating range of -25 – +70 °C with natural convection. Derating applies at the upper end, so verify the cabinet temperature under full load rather than the room temperature.
04What are the dimensions and weight of the 6EP3334-8SB00-0AY0?
The enclosure measures 55 mm wide, 125 mm high and 125 mm deep and weighs about 1 kg. It snaps onto a 35 mm DIN rail and can be mounted side by side, but vertical clearance for convection must be kept.
05How efficient is the 6EP3334-8SB00-0AY0 and how much heat does it release?
The catalog lists an efficiency of about 94 % at rated load, which corresponds to a power loss of 18 W. Include this loss in the cabinet heat balance, especially in hot desert climates.


















Reviews
There are no reviews yet.