- Automation & ControlView all 2,725 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Megger
Megger TDR2000/3 Dual-Channel Time Domain Reflectometer
Description
Overview
The Megger TDR2000/3 is a compact, dual-channel time domain reflectometer for locating faults in paired metallic cables. It is built for communication, control and pilot cables and for some power supplies, and it displays a cable as a trace on an 800 x 480 pixel colour screen so the user can see the length of the cable, the position of joints and the location of faults such as open circuits, short circuits, water ingress or damaged sections. Minimum resolution is 0.1 m (0.3 ft) and the maximum range is 20 km (65 kft), depending on the velocity factor and the cable type.
For plants in Oman and the GCC, instrumentation and control cabling runs for kilometres between control rooms, field junction boxes, substations and remote sites, and a fault in a single pair can stop a protection scheme, a telemetry link or a field loop. Seven Star LLC supplies the Megger TDR2000/3 from Muscat with engineering support, and can help you choose between the TDR2000/3, the TDR2000/3P with fused leads and the TDR2010 and TDR2050 variants covered by the same manufacturer datasheet.
Operating Principle
A time domain reflectometer sends a short electrical pulse down a cable and listens for reflections. Any change in impedance along the cable, such as a joint, a short, an open end or a section where moisture has changed the insulation, reflects part of the pulse back to the instrument. Because the speed of the pulse in the cable is known from the velocity factor, the delay between the transmitted pulse and the reflection is converted into a distance. The Megger TDR2000/3 allows the velocity factor to be set from 0.2 to 0.99 in steps of 0.01 so it can be matched to the cable under test.
The output impedance can be selected to match the cable: 25, 50, 75, 100 or 125 ohm, or an automatic setting that matches the cable impedance. The pulse can be as short as 2 ns, which supports location of faults near the instrument, and the pulse width is determined by the range, the cable and the model. Two channels let the user compare the traces from two pairs, overlay them and use dual cursors to read the distance between two points, which is a fast way to identify a fault by comparing a bad pair with a good pair in the same cable.
Engineering Design of the Megger TDR2000/3
The Megger TDR2000/3 is housed in an ABS case measuring 290 x 190 x 55 mm and weighing 1.7 kg, with an IP54 rating for use indoors or outdoors and an operating range of -15 to +50 degrees Celsius. The WVGA colour display is viewable in daylight, has a permanent backlight with adjustable brightness and offers two preset colour schemes and one custom scheme. Input connections are four 4 mm safety terminals and two F connectors, and the instrument can be used on de-energised systems with the supplied test leads; the model is rated 150 V CAT IV for connections to live telecom circuits.
Operation of the Megger TDR2000/3 is guided by an AUTO selection that chooses the best parameters for the range and aids rapid diagnosis, and by AutoFind, which adjusts range and gain and positions the cursor on the first major event on the cable, then jumps to the next disturbance on the next press. Manual override allows experts to fine tune the instrument to identify hard-to-determine faults. One hundred internal trace memories store results, which can be recalled, compared with a live trace and downloaded over USB to TraceXpert software for reporting. A Li-ion battery gives about 12 hours of typical use, and a charger, download kit and carry case are included.
Key Features
Technicians choosing the Megger TDR2000/3 benefit from these practical characteristics:
- Dual-channel design with trace overlay, dual cursors and comparison against stored traces for faster fault diagnosis.
- Resolution of 0.1 m and range up to 20 km, with accuracy of plus or minus 1 percent of range plus or minus 1 pixel at 0.67 velocity factor.
- AUTO set-up and AutoFind functions that deliver useful traces straight from the box.
- A 2 ns pulse for near-end fault location and an adjustable output impedance with automatic matching.
- A large 800 x 480 colour display with backlight that can be read in outdoor lighting.
- One hundred stored traces and USB transfer to TraceXpert PC software for analysis and reports.
- IP54 enclosure and a Li-ion battery with about 12 hours of life for field work.
- Family options: the TDR2000/3P adds fused leads, the TDR2010 adds trace tagging and extra colour schemes, and the TDR2050 adds 600 V CAT IV protection, step TDR, distance dependent gain and FindEnd.
Industrial Applications
The Megger TDR2000/3 is used on telephone and data pairs, instrumentation and control multi-pair cables, intercom and alarm cabling and the pilot wire circuits that link protection relays between substations. In Oman, where the cable routes that a Megger TDR2000/3 tests are long and underground sections may pass through areas of high temperature, salt and sudden flooding, a TDR allows maintenance crews to locate a fault within metres instead of digging along the whole route. Typical users include telecom operators, utilities and the instrument departments of oil, gas and power plants.
Plant teams in Muscat, Sohar and Salalah can combine the Megger TDR2000/3 with other maintenance tools such as the Fluke 754 documenting process calibrator for loop checks, the Fluke 773 milliamp process clamp meter for current measurements and the Fluke 8508A reference multimeter for precision verification. Seven Star LLC can supply the instrument with extra lead sets and the manufacturer documentation to support your cable-fault location and commissioning workflows.
Technical Specifications
Figures below are taken from the Megger datasheet for the TDR2000/3, TDR2010 and TDR2050 range.
| Parameter | Specification |
|---|---|
| Model | Megger TDR2000/3 (variants TDR2000/3P, TDR2010, TDR2050) |
| Range and resolution | Up to 20,000 m with 0.1 m minimum resolution |
| Accuracy | Plus or minus 1 percent of range plus or minus 1 pixel at 0.67 velocity factor |
| Output pulse | Up to 20 V peak to peak into open circuit; 2 ns pulse |
| Output impedance | 25, 50, 75, 100, 125 ohm and AUTO |
| Velocity factor | 0.2 to 0.99 in steps of 0.01 |
| Display | 800 x 480 colour LCD with backlight |
| Memory and software | 100 traces; TraceXpert PC software via USB |
| Battery | Li-ion rechargeable, about 12 hours typical |
| Safety and ingress | 150 V CAT IV (TDR2000/3 and TDR2010); IP54 |
| Size and weight | 290 x 190 x 55 mm; 1.7 kg |
Request a Quote for Megger TDR2000/3
To obtain a quotation for the Megger TDR2000/3, send Seven Star LLC the cable types, lengths, voltage levels and the model variant you prefer. We will confirm availability and lead time at quotation, share the manufacturer datasheet and quote delivery to your site in Oman or elsewhere in the GCC. Our instrumentation team can also propose lead sets and spare accessories to keep your Megger TDR2000/3 ready for the next cable fault call-out.
Datasheets & Documents
- Datasheet Megger TDR2000/3, TDR2010 and TDR2050 Advanced Dual Channel TDR Datasheet (Official) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Megger is the British maker of electrical test instruments whose name became the everyday word for an insulation tester. Its roots go back to 1889, when Sydney Evershed built an early insulation testing set, and the Megger trademark was registered in 1903. The group is headquartered in Dover, UK.
Seven Star LLC is an independent supplier in Muscat. We list Megger insulation testers, low resistance ohmmeters, earth testers, cable fault locators and relay test sets for testing and maintenance teams in Oman and the GCC.
Megger company profile
| Origins | 1889 insulation testing set by Sydney Evershed. Evershed & Vignoles was formed in 1895, and the Megger trademark was registered in 1903. |
|---|---|
| Headquarters | Dover, UK, with major US sites in Dallas (Texas) and Valley Forge (Pennsylvania) |
| History | Evershed & Vignoles joined AVO in 1968, and the group took the Megger name in 2002 |
| Product families | Insulation resistance testers, low resistance ohmmeters, earth testers, cable fault location, relay and circuit breaker test sets, transformer and battery testers, multimeters and installation testers |
| Users | Utilities, substation and switchgear contractors, oil and gas maintenance teams, motor and cable testing, building services electricians |
Milestones
- 1889: Sydney Evershed's insulation testing set.
- 1895: Evershed & Vignoles is formed.
- 1903: The Megger trademark is registered.
- 1968: Evershed & Vignoles joins AVO.
- 2002: The group takes the Megger name.
Megger instruments we list
| Model | Type | Typical job |
|---|---|---|
| MIT1025/2 | 10 kV insulation resistance tester | Insulation, polarisation index (PI) and dielectric absorption tests on MV cables, motors, generators and transformers |
| DLRO10X | 10 A digital low resistance ohmmeter | Micro-ohm tests on busbar joints, breaker contacts, cable splices and bonds |
| DET4T2 | Four-terminal earth tester | Earth electrode resistance and soil resistivity for substations and earthing systems |
| TDR2000/3 | Dual-channel time domain reflectometer | Locating faults, splices and opens on power and communication cables |
| SMRT410 | Multi-phase relay test system | Secondary injection testing of protection relays during commissioning and maintenance |
An insulation test applies a DC voltage and measures the leakage current to give a resistance value. Tracking that value and the PI over time shows moisture and ageing in a winding or cable long before it fails. The test voltage is chosen from the equipment's rated voltage, so a 10 kV tester can test MV equipment properly where a 1 kV or 5 kV model cannot.
Where Megger instruments are used
In Oman and the GCC, Megger testers are standard equipment for substation commissioning, switchgear and cable acceptance tests, motor and generator maintenance in oil and gas, power and water plants, and periodic earthing system checks.
Ordering Megger instruments: what we need
Send the model and any kit or accessory codes (leads, carry case, software, calibration certificate), and say whether a UKAS or ISO 17025 calibration certificate is required. For relay test sets, list the number of current and voltage channels you need and the test software.
Facts checked against Megger company history pages, October 2026.
Browse Megger products by category: Portable Test & Measurement.
FAQ
Questions about the Megger TDR2000/3 Dual-Channel Time Domain
Answers from our engineering team on installation, compatibility and integration.
01What is the Megger TDR2000/3 used for?
The Megger TDR2000/3 is a dual-channel time domain reflectometer used to locate faults on paired metallic communication, control and pilot cables. It shows the cable as a trace and helps identify opens, shorts, joints and water ingress.
02What range and resolution does the Megger TDR2000/3 offer?
The datasheet lists a minimum resolution of 0.1 m (0.3 ft) and a maximum range of 20 km (65 kft), depending on the velocity factor and cable type. Accuracy is plus or minus 1 percent of range plus or minus 1 pixel at 0.67 velocity factor.
03How does the Megger TDR2000/3 help find faults quickly?
Its AUTO set-up chooses suitable parameters, AutoFind moves the cursor to the first and then the next major event, and dual-channel overlay lets you compare a faulty pair with a good pair.
04Can the Megger TDR2000/3 store and report traces?
Yes. It stores 100 traces internally and transfers them over USB to the supplied TraceXpert software for analysis, reporting and upload back to the instrument.
05Does Seven Star LLC supply the Megger TDR2000/3 in Oman?
Seven Star LLC supplies the Megger TDR2000/3 from Muscat with engineering support for Oman and the GCC. Tell us the model variant and lead set you require and we will prepare a quotation with the datasheet.


















Reviews
There are no reviews yet.