- Automation & ControlView all 2,620 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Biffi
Biffi RPHD Double-Acting Hydraulic Rack and Pinion Actuator
Description
Overview
The Biffi RPHD is a double-acting hydraulic quarter-turn actuator of rack and pinion design. The manufacturer describes the RPHD and its spring-return counterpart, the RPHS, as high-pressure hydraulic actuators for on-off and modulating control of valves in heavy duty service. They are suitable for any low-torque quarter-turn application such as ball, plug and butterfly valves or dampers, and the series has models for output torques up to 2600 Nm.
The RPHD is operated by pressurized fluid from an external hydraulic supply. It is not a self-contained electro-hydraulic unit and it has no built-in motor, pump or reservoir. The supply medium is hydraulic oil or fire-resistant fluid, at a supply pressure of 220 barg maximum. Seven Star LLC supplies the Biffi RPHD on request to buyers in Oman and the GCC, with lead time confirmed at quotation.
Operating Principle of the Biffi RPHD
The RPHD has a central housing that contains a rack and a pinion on the output shaft, with a hydraulic cylinder on each side of the housing. Pressurizing one cylinder pushes the rack in one direction and turns the pinion and the valve stem through a quarter turn. Pressurizing the opposite cylinder drives the rack back. The manufacturer states that this double cylinder design allows different torques in opening and closing. Because both strokes are powered by the hydraulic supply, the actuator has no spring and no spring-driven fail position.
Output torque depends on the actuator model, the cylinder size and the operating supply pressure. The datasheet torque table lists values from 126 Nm for model 10-032 at 60 barg up to 2596 Nm for model 80-065 at 160 barg. Each model has its own maximum operating pressure (MOP), between 104 and 220 barg, so the cylinder size has to be chosen to suit the pressure of the hydraulic system on site.
Engineering Design of the Biffi RPHD
The housing is totally enclosed and weatherproof, made of high-strength nodular cast iron, and a cast steel option is available. An integral vent valve prevents accidental pressurization of the housing. The rack and pinion are alloy steel and run in sintered bronze bushings charged with PTFE. The cylinder tubes are carbon steel with an electroless nickel-plated, polished bore. The pistons are carbon steel with PTFE and graphite guide rings and piston seals of PTFE, graphite and NBR. Tie rods are alloy steel and the O-rings are NBR.
Stop setting screws allow angular stroke adjustment between 80° and 100°. The RPHD is listed in eight models: 10-032, 20-040, 20-050, 40-045, 40-055, 40-065, 80-055 and 80-065, where the first number is the actuator model and the second the cylinder size. The valve mounting flange has the standard ISO 5211 hole position with an alternative hole position, and accessories such as limit switch boxes or positioners mount on an interface according to VDI/VDE 3845.
Key Features
The following features are stated by the manufacturer for the RPHD and RPHS series.
- Totally enclosed, weatherproof housing in high-strength nodular cast iron, suitable for hostile environments.
- Integral vent valve that prevents accidental pressurization.
- Compact rack and pinion design with simple construction.
- RPHD double cylinder design that allows different torques in opening and closing.
- Angular stroke adjustment between 80° and 100°.
- Electroless nickel-plated and polished cylinder for corrosion resistance and minimal friction.
- Piston seals with low hysteresis and high sensitivity, which prevent sticking.
- Bushings in sintered bronze charged with PTFE for minimal friction and long life, and a cast steel housing option.
Industrial Applications
The Biffi RPHD is used to automate small and medium quarter-turn valves and dampers where a high-pressure hydraulic supply is available, for example from a hydraulic power unit or a hydraulic control panel. Because it works at pressures up to 220 barg, the cylinders are small for the torque delivered, which helps where space around the valve is limited. Typical duties are on-off isolation and modulating control of ball, plug and butterfly valves.
For hazardous and outdoor locations the datasheet lists ATEX area classification II 2GD, enclosure rating IP67M to IEC 60529 and NEMA 4, 4X and 6, and safety integrity level SIL 3 to IEC 61508. Where the valve must move to a safe position on loss of hydraulic pressure, the spring-return Biffi RPHS is the corresponding model.
Technical Specifications
The table below summarizes the main data for the Biffi RPHD, taken from Biffi product data sheet VCTDS-02814-EN Rev. 0 (January 2022).
| Parameter | Specification |
|---|---|
| Model | Biffi RPHD (double-acting hydraulic) |
| Actuator Type | Hydraulic rack and pinion, quarter-turn |
| Supply Medium | Hydraulic oil or fire-resistant fluid |
| Supply Pressure | 220 barg maximum |
| Maximum Operating Pressure | 104 to 220 barg, depending on model |
| Output Torque | Up to 2600 Nm (series) |
| Standard Ambient Temperature | −20°C to +100°C |
| Extended Ambient Temperature | −60°C to +135°C |
| Stroke Adjustment | Between 80° and 100° |
| Models | 10-032, 20-040, 20-050, 40-045, 40-055, 40-065, 80-055, 80-065 |
| Mounting Interface | ISO 5211 hole position; accessories to VDI/VDE 3845 |
| Hydraulic Connections | 2 x 1/4 inch NPT |
| Enclosure Protection | IP67M; NEMA 4, 4X, 6 |
| Approvals | ATEX II 2GD; SIL 3 (IEC 61508); PED 2014/68/EU; Machinery Directive 2006/42/EC |
| Valve Compatibility | Ball, plug and butterfly valves, dampers |
Request a Quote for Biffi RPHD Double-Acting Hydraulic Rack and Pinion Actuator
To request a quote for the Biffi RPHD, send Seven Star LLC the valve type and size, the required opening and closing torques with safety factor, the hydraulic supply pressure and fluid, the ambient temperature range and any accessories needed, such as a limit switch box or positioner. The actuator is supplied on request, with lead time confirmed at quotation.
Browse the full Biffi range or see more Valve Actuator products supplied by Seven Star LLC in Oman and the GCC.
Datasheets & Documents
- Datasheet Biffi RPHD / RPHS Hydraulic Actuators Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Biffi is an Italian maker of valve actuators for the oil and gas and petrochemical industries. Its first factory opened in 1955 in Fiorenzuola d'Arda, near Piacenza, making electric actuators for the Italian petrochemical industry; the company moved to its present site in 1969. Biffi is now part of Emerson, and its pneumatic, hydraulic and electric actuators drive pipeline, wellhead and shutdown valves.
Seven Star LLC lists Biffi actuators across these operating media and supplies them to valve automation shops and operators in Oman, sized from the valve torque data.
Biffi company profile
| Founded | 1955, Fiorenzuola d'Arda, Italy |
|---|---|
| First products | Electric valve actuators for the Italian petrochemical industry |
| Headquarters | Fiorenzuola d'Arda, Piacenza, Italy (Biffi Italia Srl) |
| Ownership | Emerson |
| Product families | ALGA pneumatic scotch-yoke actuators, ALGAS gas-over-oil actuators, F01 and ICON2000 electric actuators, electro-hydraulic and hydraulic actuators for on-off and emergency shutdown duty |
Milestones
- 1955: The first Biffi factory opens in Fiorenzuola d'Arda.
- 1969: Biffi moves to its present location.
- 1978 and 1996: The plant is expanded.
Biffi actuator series on this page
The series names follow a logic that helps when reading a tag. ALGA is the pneumatic quarter-turn actuator and ALGAS its spring-return version. OLGA-H is the hydraulic quarter-turn actuator and OLGAS-H the fail-safe hydraulic version with spring. In the compact rack-and-pinion group, RPD and RPS are the double-acting and spring-return pneumatic pair, and RPHD and RPHS are their hydraulic counterparts. The F01 and F02 are electric quarter-turn actuators, the ICON2000 and ICON3000 are electric multi-turn actuators and the EFS 3000 is a fail-safe electric quarter-turn actuator; the manufacturer now names the Bettis SCE300 as the replacement for the F02. In each pair the S marks the model that returns to a safe position by spring.
Where Biffi actuators are used
Typical duties are emergency shutdown and blowdown valves, pipeline block valves, wellhead and manifold valves, tank farm isolation and large ball valves at compressor and metering stations. Spring-return models are chosen for fail-safe service. Hydraulic and electro-hydraulic units appear where instrument air is not on hand, as on remote GCC pipeline stations.
Biffi products we list
Ordering Biffi actuators: what we need
Actuators are sized, so the valve data comes first: valve type and size, the torque curve or at least break, run and end torques, the safety factor in your specification and the stem and mounting flange dimensions. Then the supply: minimum and maximum air or oil pressure, or voltage for electric units. State the fail action, stroking time, ambient temperature and the control accessories required. For an existing actuator send the model and serial number from the nameplate.
Facts checked against Biffi's own history (Emerson), October 2026.
Browse Biffi products by category: Valve Actuator.
FAQ
Questions about the Biffi RPHD Double-Acting Hydraulic Rack and Pinion
Answers from our engineering team on installation, compatibility and integration.
01What type of actuator is the Biffi RPHD?
The Biffi RPHD is a double-acting hydraulic quarter-turn actuator of rack and pinion design. Two hydraulic cylinders, one on each side of the housing, move a rack that turns a pinion on the output shaft. It is used for on-off and modulating control of ball, plug and butterfly valves and dampers.
02Does the RPHD require a separate hydraulic supply?
Yes. The RPHD has no built-in motor, pump or reservoir. It is operated by pressurized hydraulic oil or fire-resistant fluid from an external source, such as a hydraulic power unit, at a supply pressure of 220 barg maximum. Each model also has its own maximum operating pressure, between 104 and 220 barg.
03What torque and valve sizes is the RPHD suited to?
The manufacturer describes the RPHD as suitable for low-torque quarter-turn applications. The series covers output torques up to 2600 Nm, and the datasheet torque table starts at 126 Nm for model 10-032 at 60 barg. It is therefore a compact actuator for small and medium valves, not a high-torque unit for large pipeline valves.
04What happens to the RPHD if hydraulic pressure is lost?
The RPHD is double-acting, so both strokes are powered by the hydraulic supply. It has no spring and does not move to a defined safe position by itself when the pressure is lost. Where a spring-driven fail action is required, the spring-return Biffi RPHS from the same series is used instead.
05How does Seven Star LLC supply the Biffi RPHD?
Seven Star LLC supplies the Biffi RPHD on request to buyers in Oman and the GCC. Lead time is confirmed at quotation. To prepare a quote we need the valve type and size, the required torques, the hydraulic supply pressure and fluid, the ambient temperature range and any accessories required.


















Reviews
There are no reviews yet.