Brand:

SMC MGPM20-50Z Compact Guide Cylinder, 20 mm Bore, 50 mm Stroke

Description

SMC MGPM20-50Z compact guide cylinder overview

The SMC MGPM20-50Z is a compact guide cylinder from the MGP-Z series with a 20 mm bore, a 50 mm stroke and slide bearings. A compact guide cylinder combines a double acting air cylinder with two guide rods and a front plate in one body, so the rod is supported against rotation and side loads without an external guide. Because of this the SMC MGPM20-50Z replaces a cylinder plus a separate guide assembly in many small machines.

The ordering code reads as follows: MGP is the compact guide cylinder, M selects the slide bearing type, 20 is the bore size in millimetres, 50 is the stroke in millimetres, and Z identifies the series version. The port thread type and the auto switch positions are left blank, so the cylinder has the standard port thread and carries a built-in magnet for auto switches but no switch.

This page restates the data in the manufacturer catalog for buyers in Oman and the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the MGPM20-50Z

The MGP family is described in the catalog as a compact guide cylinder with a basic type, an air cushion type, an end lock type and a heavy duty guide rod type. The points below apply to the MGPM20-50Z.

  • Integrated guide: two guide rods carried in slide bearings give the MGPM20-50Z rotation resistance and lateral rigidity in a single body.
  • Rubber bumpers on both ends absorb the shock at the end of stroke, with no air cushion in this basic type.
  • Rod size of 10 mm and a piston area of 314 mm2, which gives about 157 N of theoretical thrust on the out stroke at 0.5 MPa.
  • Non-lube operation: the catalog states that no lubrication is required.
  • Built-in magnet: the piston carries a magnet, so solid state and reed auto switches can be mounted on the body at any time.
  • Wide stroke choice: standard strokes for a 20 mm bore range from 20 mm up to 400 mm.

Other versions of the family use a ball bushing or a high precision ball bushing, which are chosen with the L or A bearing codes in place of M, and the same bore and stroke can be requested for those if the application needs less guide friction or higher precision.

MGPM20-50Z technical specifications

The table collects the main figures that the manufacturer publishes for the MGPM20-50Z. Theoretical thrust is the product of pressure and piston area and does not include friction or the weight of the load.

Parameter Value
Model MGPM20-50Z
Series MGP-Z compact guide cylinder, basic type
Bearing type Slide bearing (code M)
Action Double acting
Bore size 20 mm
Stroke 50 mm
Rod size 10 mm
Fluid Air
Proof pressure 1.5 MPa
Maximum operating pressure 1.0 MPa
Minimum operating pressure 0.1 MPa
Ambient and fluid temperature minus 10 to 60 degC (no freezing)
Piston speed 50 to 500 mm/s
Cushion Rubber bumper on both ends
Lubrication Not required (non-lube)
Piston area, out side 314 mm2
Theoretical thrust at 0.5 MPa, out about 157 N
Auto switch Built-in magnet; switch ordered separately
Standard strokes for this bore 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350 and 400 mm

A 50 mm stroke is a standard stroke for a 20 mm bore. Intermediate strokes can be supplied with a spacer built into the standard cylinder or with a dedicated body, and made to order options such as a heat-resistant version, a stainless steel version, a shock absorber version and a heavy-duty scraper version are listed in the catalog.

Typical applications in Oman and the GCC

A guided cylinder such as the MGPM20-50Z is used wherever a load must move in a straight line without twisting: transfer and pick-and-place units, stoppers and lifters on conveyors, press and insertion jigs, and small positioning tables. In Oman these jobs are found in packaging and bottling lines, in assembly cells in light industry and in the fabrication workshops that support oil, gas and construction projects.

In process and utility plants, the MGPM20-50Z can be used inside skids and test benches to move sample probes, clamp sensors and push small gates in water treatment and desalination equipment, where the guide rods keep the load aligned and free of rotation.

The MGPM20-50Z is rated for an ambient and fluid temperature of minus 10 to 60 degC without freezing. In the hot climate of the Gulf, shaded installation and clean, dry compressed air help keep the slide bearings working smoothly.

Selection and compatibility notes for the MGPM20-50Z

Choose the bore from the load and the pressure. The MGPM20-50Z gives about 157 N on the out stroke at 0.5 MPa before losses, and the catalog contains a model selection chart that relates load, moment and stroke to the allowable values for each bore. Follow the chart, not only the thrust, because a guided cylinder is limited by the load moment on the guide rods.

The bearing type changes how smoothly the load moves. The slide bearing (M) of the MGPM20-50Z is the basic choice, while the ball bushing and high precision ball bushing versions are offered for applications that need lighter, more precise motion. The piston speed range of 50 to 500 mm/s applies to the bore range up to 63 mm.

Piping and sensing are also set by the code. The port thread is the standard thread for the bore, with NPT or G variants available through the port thread code. Auto switches, such as the D-M9 and D-A9 types listed in the catalog, are ordered separately and are shipped together with the cylinder but not assembled.

  • Minimum operating pressure: 0.1 MPa; maximum 1.0 MPa.
  • Cushion: rubber bumpers only, so use speed controllers and stoppers for heavy loads.
  • Fluid: air, non-lube.
  • Mounting: the body is drilled for mounting from more than one direction; see the catalog dimension page.

Installation and commissioning of the MGPM20-50Z

Fix the MGPM20-50Z on a flat, rigid surface using the mounting holes shown in the catalog dimensions, and connect the load to the front plate with its mounting holes, not to the rod ends. Do not use the plate as a pivot, and keep the load centre close to the guide rod axis.

Pipe the two ports through speed controllers in a meter-out arrangement. Supply air slowly, check that the MGPM20-50Z moves through the whole stroke without sticking, and raise the speed gradually, taking care that the rubber bumpers absorb the stop at both ends.

If auto switches are fitted, set them at the stroke ends after the cylinder is running smoothly, following the mounting height and operating range in the auto switch section of the catalog.

Maintenance and service life

The MGPM20-50Z does not need lubrication, but clean air is important. Drain filters regularly and check the guide rods for scoring, which is the first sign of a side load that is too high or of contaminated air.

A grease option with a stable lubrication function is listed for the family, and the catalog lists replacement parts such as seal kits per bore size. Check mounting screws and the front plate screws for loosening after the first weeks of operation, then at normal service intervals.

For critical lines keep a spare MGPM20-50Z or the same bore, bearing and stroke combination in stock.

Related products and ordering notes

Items commonly ordered with the MGPM20-50Z are auto switches, speed controllers, one-touch fittings, silencers and mounting accessories. For harsher conditions the family offers water resistant, dust resistant and lube-retainer versions that use different codes.

For a quotation, list the quantity of the MGPM20-50Z, the port thread type, any auto switches, and any made to order feature. When replacing a cylinder in service, send the nameplate code so that the bore, bearing type, stroke and series suffix can be matched.

SMC MGPM20-50Z vs Other SMC Compact Guide Cylinder mm Bore Variants

Pick this variant when MGPM20-50Z 20 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
SMC MGPM20-50Z Compact Guide Cylinder, 20 mm Bore, 50 mm Stroke (this page) MGPM20-50Z 20
SMC MGPM25-50Z Compact Guide Cylinder, 25 mm Bore, 50 mm Stroke MGPM25-50Z 25

Frequently asked questions about the MGPM20-50Z

The questions below cover the code, the bearing type, the thrust and the quotation process for the MGPM20-50Z.

Documents and quotation

A datasheet extract with the how-to-order page and the specification page of the MGP-Z compact guide cylinder is attached to this page. To request a quotation, send the RFQ with the part number MGPM20-50Z, the quantity and the delivery destination, and we will confirm availability and lead time for Oman and the GCC.

Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SMC is the Japanese specialist in pneumatic automation: air preparation units, solenoid valves, cylinders, fittings, process valves and sensors. Yoshiyuki Takada founded the company in Tokyo on 27 April 1959 as Shoketsu Kinzoku Kogyo, which means Sintered Metal Corporation, and its first products were sintered metal filters. SMC Corporation is headquartered in Tokyo and listed on the Tokyo Stock Exchange, and its products are used on machines and instrument air lines across the world.

Seven Star LLC, an independent supplier in Oman, lists SMC AW series filter regulators (AW20 and AW40) and the VX2 series direct-operated 2-port solenoid valve, and sources other SMC parts by full part number.

SMC company profile

Founded 27 April 1959, Tokyo, Japan, as Shoketsu Kinzoku Kogyo (Sintered Metal Corporation)
Founder Yoshiyuki Takada (1928–2024)
First products Sintered metal filters; pneumatic air line equipment from 1961
Headquarters Tokyo, Japan
Ownership SMC Corporation, a public company listed on the Tokyo Stock Exchange
Product families AF/AR/AW modular air preparation, VT/VQ/SY solenoid valves, VX/VXZ 2-port valves, air cylinders and rotary actuators, fittings and tubing, pressure and flow switches, vacuum equipment

Milestones

  • 1959: Shoketsu Kinzoku Kogyo is founded in Tokyo on 27 April and starts making sintered metal filters.
  • 1961: Pneumatic air line equipment is added.
  • 1964: Automatic control equipment becomes part of the business.
  • 1967: The first overseas operation starts, with a stake in an Australian company.
  • 1970: SMC begins making air cylinders.

SMC series listed on this page

The AW is a combined filter and pressure regulator in SMC's modular air preparation line. The body size is in the name: AW20 is the smaller unit and AW40 the larger, and the digits after the dash give the port size. A part number such as AW40-04-A therefore describes body size, port and options in one string. The VX2 is a direct-operated two-port solenoid valve for shutting off air, water, oil or steam, depending on the body and seal materials chosen.

SMC products we list

Family Examples
Pneumatic Cylinders CA2B50-100 Tie Rod Air Cylinder 50 mm Bore, CP96SDB63-100C ISO 15552 Cylinder 63 mm Bore, CRQ2BS20-90 Compact Rotary Actuator Size 20, CY1S20-300Z Magnetically Coupled Rodless, CY3B25-300Z Magnetically Coupled Rodless, MB1B40-100Z Square Tube Air Cylinder 40 mm, MGPM40-25Z Compact Guide Cylinder 40 mm Bore, MHC2-16D Angular Air Gripper 16 mm Bore and 6 more
Solenoid Valves SY3120-5LZD-M5 Compact 5-Port Solenoid Valve, SY5120-5LZD-01 5-Port Solenoid Valve SY5000, SY7120-5LZD-02 5-Port Solenoid Valve SY7000, VK3120-5G-M5 Direct Operated 5-Port Solenoid, VQC1101-5 Plug-in 5-Port Solenoid Valve, VQC4101-5 Plug-in 5-Port Solenoid Valve, VT307-5G1-01 3-Port Direct Operated Solenoid, VX2 Series Direct-Operated 2-Port Solenoid and 1 more
Regulators AF30-03 Modular Air Filter 3/8 Rc, AR30-03 Modular Pressure Regulator 3/8 Rc, AW20 Air Filter & Pressure Regulator, AW40 Series Modular Filter Regulator

Ordering SMC parts: what we need

Give the complete SMC part number from the label, including thread prefix, options and the final suffix letter. For AW units state gauge, drain type and bracket if you need them. For VX2 valves send coil voltage, port size, orifice, body and seal material, and the fluid. Buyers in the GCC often have NPT or G threads on site, so say which thread standard the piping uses.

Facts checked against SMC's published corporate history, October 2026.

FAQ

Questions about the SMC MGPM20-50Z Compact Guide Cylinder, 20 mm Bore,

Answers from our engineering team on installation, compatibility and integration.

01What does the code MGPM20-50Z mean?
MGP is the compact guide cylinder, M is the slide bearing, 20 is the bore in millimetres, 50 is the stroke in millimetres and Z is the series version. Blank positions give the standard port thread and no auto switch.
02Is a 50 mm stroke standard for the MGPM20-50Z?
Yes. For a 20 mm bore the catalog lists standard strokes of 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350 and 400 mm, which includes 50 mm.
03How much thrust does the MGPM20-50Z give?
The out stroke gives about 157 N at 0.5 MPa from a piston area of 314 mm2, before friction. The catalog model selection charts should be used to check the load and moment limits.
04What are the pressure and temperature limits of the MGPM20-50Z?
Maximum operating pressure is 1.0 MPa, minimum is 0.1 MPa, proof pressure is 1.5 MPa, and the ambient and fluid temperature is minus 10 to 60 degC without freezing.
05How do I request a quotation for the MGPM20-50Z?
Send an RFQ with the part number MGPM20-50Z, the quantity and the delivery location. Seven Star LLC will reply with availability and lead time; this page shows no price.