- Automation & ControlView all 2,469 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Festo
Festo DSNU-40-25-PPS-A Round Cylinder
Description
DSNU-40-25-PPS-A: 40 mm bore, 25 mm stroke double-acting round cylinder
The Festo DSNU-40-25-PPS-A (article 559305) is a double-acting round cylinder with a 40 mm piston and 25 mm stroke, built to round-barrel format. Seven Star LLC supplies DSNU-40-25-PPS-A in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. The paragraphs below explain the data on the manufacturer sheet, how to select the right size and what to send for a quotation.
Reading the part number against the datasheet:
- DSNU is the series: the round cylinder series.
- 40 in the code corresponds to the 40 mm piston diameter and 25 to the 25 mm stroke stated on the datasheet.
- Cushioning: Self-adjusting pneumatic end-position cushioning.
- Rod end: , thread M12x1.25.
- Port size: G1/4.
DSNU-40-25-PPS-A technical specifications
Values below are taken from the manufacturer data sheet for article 559305.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Festo / DSNU-40-25-PPS-A |
| Article number | 559305 |
| Piston diameter | 40 mm |
| Stroke | 25 mm |
| Piston rod thread | M12x1.25 |
| Cushioning | Self-adjusting pneumatic end-position cushioning |
| Format | round-barrel format |
| Mode of operation | Double-acting |
| Operating pressure | 1 to 10 bar |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4]; oil lubrication possible |
| Ambient temperature | -20 °C to 80 °C |
| Pneumatic connection | G1/4 |
| Theoretical force at 6 bar, advancing | 752.9 N |
| Theoretical force at 6 bar, retracting | 633.3 N |
| Impact energy in the end positions | 0.7 J |
| Cushioning length | 18 mm |
| Moving mass | 270 g |
| Product weight | 721 g |
| Position sensing | Via proximity switch |
| Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
| Barrel material | high-alloy stainless steel |
| Piston rod material | High-alloy steel |
| Cover material | Wrought aluminum alloy |
How the DSNU-40-25-PPS-A works and what the force figures mean
Compressed air admitted behind the piston pushes the rod out; air admitted on the rod side pulls it back, which is what double-acting means. The advancing force of 752.9 N at 6 bar is the theoretical value (pressure times piston area). The retracting force is lower, 633.3 N, because the rod takes up part of the piston area on that side; the loss is about 16 percent.
Force scales with pressure. As a theoretical guide, the same cylinder gives about 502 N at 4 bar and about 1004 N at 8 bar when advancing, before friction and load acceleration are deducted. Real systems deliver less, so size with margin.
End-position damping is by self-adjusting pneumatic end-position cushioning, which adapts to the load without manual setting. The datasheet states an impact energy of 0.7 J in the end positions, which is the energy the cushioning can handle; if moving mass times speed squared is above it, add external damping or reduce speed with flow control.
Where DSNU-40-25-PPS-A fits: compatible and related parts
A cylinder of this type is normally part of a small chain: a directional valve, flow controls, fittings and tubing, and a position sensor on the barrel. The datasheet lists proximity switch sensing and mounting options (With accessories), so mounting kits such as foot, flange or clevis mounts are ordered separately as accessories. Fittings must match the G1/4 port.
Siblings in the same family that we handle include DSNU-40-25-PPV-A. Each differs in bore, stroke or cushioning, so they are not interchangeable without checking force, travel and mounting.
Selection and ordering checklist for DSNU-40-25-PPS-A
- Required force at the real working pressure, with margin; DSNU-40-25-PPS-A gives 752.9 N advancing at 6 bar.
- Stroke: 25 mm is fixed by the part number, so confirm the full travel including any dead length.
- Cushioning type: self-adjusting pneumatic end-position cushioning, which adapts to the load without manual setting.
- Rod end: with M12x1.25; confirm that attachments match.
- Operating pressure window 1 to 10 bar; check that the plant air stays inside it.
- Position sensing: Via proximity switch.
- Self-adjusting cushioning replaces the adjustment screws, so remember that tuning is not possible if the load changes later.
Installation, commissioning and maintenance of DSNU-40-25-PPS-A
Mount the cylinder on a flat rigid surface and align the load with the rod axis so that no side force acts on the rod bearing. Use flow control valves to tune speed; the G1/4 port takes standard Festo-type or generic fittings of that thread. Mounting position is any.
For commissioning, supply clean dried air, start at low pressure, cycle the cylinder without load and then raise to working pressure. The self-adjusting cushioning needs no screws; check only that the stroke ends are reached smoothly. Check rod and wiper for wear and listen for air leaks at the end caps during routine rounds. Keep a spare seal kit or a replacement cylinder on the shelf for lines that cannot stop.
Typical applications of DSNU-40-25-PPS-A in Oman and the GCC
Oman and the wider GCC put pneumatic equipment under demanding conditions: ambient heat in summer, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. The same 40 mm bore and 25 mm stroke as the PPV version but with self-adjusting cushioning, which suits applications where nobody will go back and tune cushioning screws.
Where air is dry and filtered, a cylinder such as the DSNU-40-25-PPS-A typically runs for years between seal replacements. In dusty outdoor or semi-outdoor locations, a bellows or rod protection and a regular wipe of the rod extend life.
DSNU-40-25-PPS-A and sibling variants compared
The table compares DSNU-40-25-PPS-A with other cylinders of this family from the manufacturer data sheets.
| Part number | Piston diameter | Stroke | Force at 6 bar, advancing | Cushioning |
|---|---|---|---|---|
| DSNU-40-25-PPV-A | 40 mm | 25 mm | 752.9 N | Pneumatic cushioning |
| DSNU-40-25-PPS-A | 40 mm | 25 mm | 752.9 N | Self-adjusting pneumatic end-position cushioning |
Information to send with your DSNU-40-25-PPS-A RFQ
- Full part number DSNU-40-25-PPS-A and the quantity required.
- Working pressure, load mass and cycle time, so we can check force and cushioning.
- Mounting accessories needed: foot, flange, clevis, rod eye or sensors.
- Fitting thread and tube size on your side.
- Environment: ambient temperature, dust, washdown or outdoor exposure.
- Delivery location in Oman or the GCC and required lead time.
Documents and quotation
The manufacturer data sheet for DSNU-40-25-PPS-A is attached on this page for download.
Send the part number DSNU-40-25-PPS-A with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.
Other Models in the Festo Dsnu Round Cylinder Range
Seven Star LLC supplies models from the Festo Dsnu Round Cylinder range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Festo DSNU-40-25-PPV-A Round Cylinder | Pneumatic Cylinders | View details |
| Festo DSNU-40-25-PPS-A Round Cylinder | Pneumatic Cylinders | You are viewing this model |
Datasheets & Documents
- Datasheet Festo DSNU-40-25-PPS-A Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.
Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.
Festo company profile
| Founded | 1925, Esslingen am Neckar, Germany |
|---|---|
| Founders | Albert Fezer and Gottlieb Stoll |
| Name | From FEzer and STOll |
| Headquarters | Esslingen am Neckar |
| Ownership | Family-owned |
| Product families | DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers |
Milestones
- 1925: Fezer and Stoll found the company in Esslingen.
- 1950s: Festo begins making pneumatic components.
Festo products listed
Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.
Festo products we list
Ordering Festo parts: what we need
Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.
Facts checked against Festo's corporate history pages, October 2026.
Browse Festo products by category: Solenoid Valve, Valve Actuator.
FAQ
Questions about the Festo DSNU-40-25-PPS-A Round Cylinder
Answers from our engineering team on installation, compatibility and integration.
01What force does the DSNU-40-25-PPS-A produce?
The datasheet gives a theoretical advancing force of 752.9 N and a retracting force of 633.3 N at 6 bar. Real force is lower after friction and acceleration, so size with margin.
02How is the DSNU-40-25-PPS-A cushioned?
It uses self-adjusting pneumatic end-position cushioning, which adapts to the load without manual setting. The listed impact energy in the end positions is 0.7 J, which is the limit the cushioning is rated for.
03What is the operating pressure range of the DSNU-40-25-PPS-A?
The datasheet states 1 to 10 bar with compressed air per ISO 8573-1:2010 class [7:4:4]; oil lubrication is permitted once it has been started.
04What port size and rod end does the DSNU-40-25-PPS-A have?
The pneumatic connection is G1/4 and the piston rod end is with M12x1.25.
05Can I fit position sensors to the DSNU-40-25-PPS-A?
The datasheet lists position sensing via proximity switch, so compatible magnetic-field sensors can be fitted in the barrel grooves; sensors and mounting parts are ordered separately.


















Reviews
There are no reviews yet.