Brand:

Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4 in

Description

Hoke HQC4-B1-4-316 bulkhead quick-connect body overview

The Hoke HQC4-B1-4-316 is the bulkhead version of the 1/4 inch body in the Hoke HQC series of instrumentation quick couplings. The catalogue lists it under bulkhead tube bodies, with a 1/4 inch body size and a 1/4 inch tube size, and the whole HQC range is built from 316 stainless steel. Because the body passes through a panel, the Hoke HQC4-B1-4-316 lets an operator connect and disconnect a sample or calibration line from the front of an enclosure without opening it. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

A quick coupling has two halves. The body, in this case the HQC4-B1-4-316, stays fixed on the panel or equipment, while the matching plug is fitted to a hose or a portable line. The manufacturer builds in poppet valves with integral O-ring seals, and the valve guides align the poppet with the seat so that a disconnected half is sealed. Locking tabs coated with Xylan hold the plug firmly once the sleeve is engaged.

Key features of HQC4-B1-4-316

  • Bulkhead tube design for panel mounting, with a Gyrolok nut and ferrule tube connection for 1/4 inch tube.
  • 316 stainless steel machined parts, springs and retaining rings.
  • Multiple O-ring seals, with Viton as the standard material, for leak tight connection.
  • Poppet valve in the body with a guide that aligns the valve with its seat.
  • Keyed sleeves for all sizes, and a smooth, positive sleeve engagement.
  • Special high tolerance NPT thread, as described by the manufacturer for the series.
  • Rated working pressure of 3600 psi for the 1/4 inch size.

HQC4-B1-4-316 technical specifications

The values below come from the HQC series catalogue published by the manufacturer. The dimension labels are those of the catalogue drawing, and the pressure and temperature data are series values for the 1/4 inch body size.

Part number HQC4-B1-4-316
Brand Hoke
Series HQC instrumentation quick couplings
Body size 1/4 inch (HQC4)
Construction 316 stainless steel; machined parts AISI 316, springs and retaining rings AISI 316
Rated working pressure 3600 psi connected and 3600 psi disconnected for the 1/4 inch size; connect under pressure up to 250 psi
Seals Viton O-rings as standard, +20 to +400 degrees F, Krytox lubricant as standard
Type Body assembly, bulkhead tube connection, with valve
Tube size 1/4 inch
Dimension A 2.59 inch
Hex size B 0.63 inch
Dimension C 0.88 inch
Flow coefficient, HQC4 size Cv 0.31 double end shutoff, Cv 0.45 single end shutoff
Nut and ferrule Gyrolok end connection

Typical applications in Oman and the GCC

The manufacturer lists laboratories, university laboratories, gas distribution and biopharmaceutical work as typical uses for HQC couplings. In Oman and the GCC the same pattern appears in analyser houses, sample conditioning panels, calibration gas stations and laboratory benches at refineries, gas plants, power stations and water treatment works, where a stainless quick connection on the front of a panel saves time and reduces the risk of disturbing tubing inside.

The HQC4-B1-4-316 is particularly useful where a calibration gas bottle or a portable sampling line has to be attached repeatedly to a fixed instrument. Mounting the body through the panel keeps the connection point in the same place every time and keeps the fixed-side tubing neat and short.

Selection and compatibility notes for HQC4-B1-4-316

Check that the tube size is 1/4 inch and that the panel cut-out and thickness suit a bulkhead body with the hex and length listed in the table. Confirm the media compatibility of 316 stainless steel and of the standard Viton seals with the process fluid. The catalogue gives 3600 psi working pressure for the 1/4 inch size, but you should also consider the temperature range of the seals, stated as plus 20 to plus 400 degrees F.

Select the mating plug from the same HQC4 size. The catalogue lists valved plugs for double end shutoff, such as the HQC4-D-4-316, and non-valved plugs for single end shutoff. Matching the plug type to the body decides whether the line stays closed when disconnected on one side or on both sides, and it changes the flow coefficient, which the catalogue gives as 0.31 for double end shutoff and 0.45 for single end shutoff in the HQC4 size.

Installation and handling of HQC4-B1-4-316

Install the HQC4-B1-4-316 only by trained staff and as part of a system design that suits the media. Prepare the panel opening, pass the body through and secure it, then make up the tube connection with the Gyrolok nut and ferrule following the tube fitting instructions. Use clean, square-cut tube. Leak test with an inert gas at working pressure before you connect process media, and remember that the catalogue allows connection under pressure only up to 250 psi.

Maintenance

Keep the sleeve and the sealing face clean and fit a dust cap when the body is unused. Check the O-rings regularly for wear, cracks or chemical attack and replace them if damage appears. If a coupling does not latch smoothly or shows a leak, take the line out of service and inspect the poppet and seat before further use. The catalogue notes that standard seal lubricant is Krytox.

Related products and ordering notes

Related HQC4 items in the same catalogue include the body with valve HQC4-B-4-316, the valved plug HQC4-D-4-316 and the dust cap HQC4-C-316 for the body. When you send an enquiry for the HQC4-B1-4-316, list the mating plug, the tube size and the quantity so that a complete set can be quoted. In short, the HQC4-B1-4-316 is a 1/4 inch bulkhead tube body made from 316 stainless steel and rated for 3600 psi.

Documents and quotation

The HQC series catalogue from the manufacturer is attached to this page as a datasheet. To request a quotation for the HQC4-B1-4-316, send your RFQ to Seven Star LLC with the part number HQC4-B1-4-316, the quantity you need and the delivery destination, together with the mating plug part number if known. No prices are shown on this page.

Datasheets & Documents
  • PDF Datasheet Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4 in Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Hoke is an instrumentation flow-control brand specializing in small-bore valves and fittings, part of Crane Instrumentation & Sampling. The range includes needle, ball, metering, plug and packless valves, double block and bleed and monoweld designs, Gyrolok tube fittings, instrumentation manifolds, quick couplings, and sampling cylinders with their valves and accessories. Hoke products are used wherever sample lines, gauges, transmitters and analyzers have to be isolated, vented or sampled cleanly across process industries. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We help buyers match valve, fitting and sample cylinder part numbers to their tubing size, pressure rating and material requirements, so installations stay leak-tight and easy to maintain.

FAQ

Questions about the Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4

Answers from our engineering team on installation, compatibility and integration.

01What is the Hoke HQC4-B1-4-316?
It is a bulkhead tube body from the HQC series of instrumentation quick couplings, made of 316 stainless steel, with a 1/4 inch body size and a 1/4 inch tube connection.
02What pressure is the HQC4-B1-4-316 rated for?
The catalogue gives the 1/4 inch HQC size a rated working pressure of 3600 psi in both the connected and disconnected positions, and connection under pressure up to 250 psi.
03Which plug mates with the HQC4-B1-4-316?
The body accepts a 1/4 inch HQC plug. Valved plugs such as the HQC4-D-4-316 give shutoff on both halves, and the catalogue lists non-valved plugs for single end shutoff.
04What are the main dimensions of the HQC4-B1-4-316?
The catalogue lists dimension A as 2.59 inch, a hex of 0.63 inch and dimension C of 0.88 inch for this bulkhead tube body.
05How do I request a quotation for the HQC4-B1-4-316?
Send an RFQ to Seven Star LLC with the part number HQC4-B1-4-316, the quantity, the mating plug part number and the delivery location in Oman or the GCC.