- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Hoke
Hoke 1711M4Y Needle Valve, 1/4 in Male NPT, 316 SS
Description
Hoke 1711M4Y needle valve overview
The Hoke 1711M4Y is a 316 stainless steel needle valve from the 1700 series of forged body, integral bonnet valves. It is a globe pattern valve with a 1/4 inch male NPT inlet and a 1/4 inch male NPT outlet, a non-rotating metal stem tip and an orifice of 0.187 inch (4.7 mm). The manufacturer describes the 1700 series as affordable valves suited to a wide variety of process control applications, with Dyna-Pak packing below the stem threads that prevents fugitive emissions. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
In the manufacturer order table, the 1711 prefix marks the metal stem tip version, M means male NPT at both ends, 4 means 1/4 inch and Y means 316 stainless steel. The same table lists the 1711M4M as the Monel version, the 1711L4Y with a male inlet and a female outlet, and the 1711F4Y with female NPT ends.
Key features of the Hoke 1711M4Y
- Forged 316 stainless steel body with an integral bonnet.
- Non-rotating metal stem tip, which the manufacturer says reduces galling and suits high cycle applications.
- Dyna-Pak stem packing made of alternate TFE and metal wafers, which uses system pressure to help seal and reduces the need for packing adjustment.
- 1/4 inch male NPT connections at both ends.
- Operating pressure of 6000 psig at 70 degrees F.
- Operating temperature from minus 65 to plus 450 degrees F with the metal stem tip.
- Panel mounting design with a panel hole of 57/64 inch diameter.
1711M4Y technical specifications
The data in the table come from the needle valve catalogue and the series page of the manufacturer. Dimensions are given for reference by the manufacturer and are subject to change.
| Part number | 1711M4Y |
|---|---|
| Brand | Hoke |
| Series | 1700 series, forged body, integral bonnet needle valve |
| Pattern | Globe |
| Inlet connection | 1/4 inch male NPT |
| Outlet connection | 1/4 inch male NPT |
| Body material | 316 stainless steel |
| Stem and stem tip | 316 stainless steel stem, non-rotating 17-4PH stainless steel tip |
| Stem packing | TFE and 316 stainless steel wafers (Dyna-Pak) |
| Thread gland | 450 stainless steel |
| Lock nut | 316 stainless steel |
| Handle | Aluminium (1711 series) |
| Panel mounting nut | Nickel-plated brass |
| Orifice | 0.187 inch (4.7 mm) |
| Maximum operating pressure | 6000 psig (414 bar) at 70 degrees F (21 degrees C) |
| Operating temperature | Minus 65 to plus 450 degrees F (minus 54 to plus 232 degrees C) |
| Dimension D, open | 3 inch (76 mm) |
| Dimension E | 2 3/16 inch (56 mm) |
| Dimension F | 2 1/8 inch (54 mm) |
| Dimension H | 1/2 inch (13 mm) |
| Dimension H1 | 11/16 inch (27 mm) |
| Panel mounting | Hole 57/64 inch (22.6 mm) diameter, panel thickness up to 1/4 inch (6.4 mm) |
Typical applications in Oman and the GCC
The manufacturer lists cylinder valves, panel board instrumentation, pressure gauge valves, sampling systems, research laboratories, oxygen service, and corrosive or high pressure service as typical uses of the 1700 series. In Oman and the GCC the 1711M4Y fits instrument impulse and sampling lines at oil and gas facilities, gauge isolation points on pumps and compressors, laboratory gas panels, and analyser sample conditioning systems at refineries, petrochemical plants, power stations and water plants.
The male NPT ends allow the valve to be threaded directly into female NPT ports on manifolds, vessels and instrument bodies without a tube adapter. For plants that standardise on Hoke needle valves, the 1711M4Y is a common replacement item for panel mounted throttling and shutoff positions.
Selection and compatibility notes for 1711M4Y
Confirm that the process media is compatible with 316 stainless steel, the TFE packing and the 17-4PH stainless steel stem tip. Check that the system pressure and temperature are inside the 6000 psig at 70 degrees F and minus 65 to plus 450 degrees F limits, and remember that the pressure rating is stated at 70 degrees F and changes with temperature according to the pressure versus temperature curve in the catalogue.
Select the stem tip and end connections to suit the job. The 1751 series has a PCTFE stem tip for service to 250 degrees F, and the Monel versions have an M suffix, such as the 1711M4M. Applications that need TPED or PED certification take a CE suffix on the part number, as in the manufacturer example for the 1711G4Y-CE. If you need a tube connection instead of NPT, the series offers Gyrolok ends under other part numbers.
Installation and handling of 1711M4Y
Fit the valve into clean, undamaged NPT ports using a thread sealant or tape that suits the media and temperature. Hold the valve body, not the handle, when tightening, and avoid over-tightening. If the valve is mounted on a panel, drill a hole of 57/64 inch diameter in a panel up to 1/4 inch thick and secure the valve with the panel nut. Leak test at working pressure before putting the line into service, and open and close the valve with moderate hand force.
Maintenance
The Dyna-Pak packing is designed to need fewer adjustments than conventional packing, but a periodic check is still sensible. If a leak appears around the stem, tighten the packing nut gradually within the limits given by the manufacturer. Look for seat leakage in service, and replace the valve or have it repaired if closing the valve no longer stops flow. Keep the stem threads clean and free from process deposits.
Related products and ordering notes
Related 1700 series parts include the 1711L4Y with male and female ends, the 1711F4Y with female ends, the 1711G4Y with Gyrolok ends, and the 1751M4Y with a PCTFE stem tip. When you request a quotation for the 1711M4Y, include the quantity and tell us if you need the CE suffix option or any special cleaning for oxygen service. In brief, the 1711M4Y is a 1/4 inch male NPT globe pattern needle valve in 316 stainless steel.
Documents and quotation
The needle valve catalogue from the manufacturer is attached to this page as the datasheet. To request a quotation for the 1711M4Y, send your RFQ to Seven Star LLC with the part number 1711M4Y, the quantity required and the delivery destination. No prices are shown on this page.
Other Models in the Hoke 1700 Range
Seven Star LLC supplies models from the Hoke 1700 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Hoke 1711M4Y Needle Valve, 1/4 in Male NPT, 316 SS | Instrument Valves & Fittings | You are viewing this model |
| Hoke 1711G4Y Globe Needle Valve, 316 SS | Instrument Valves & Fittings | View details |
| Hoke 1711F4Y Globe Needle Valve, 316 SS | Instrument Valves & Fittings | View details |
| Hoke 1711G6Y Globe Needle Valve, 316 SS | Instrument Valves & Fittings | View details |
| Hoke 1711M4M Globe Needle Valve, Monel | Instrument Valves & Fittings | View details |
| Hoke 1751M4Y Globe Needle Valve, 316 SS | Instrument Valves & Fittings | View details |
| Hoke 1751G4Y Globe Needle Valve, 316 SS | Instrument Valves & Fittings | View details |
Datasheets & Documents
- Datasheet Hoke 1711M4Y Needle Valve Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Hoke is an instrumentation flow-control brand specializing in small-bore valves and fittings, part of Crane Instrumentation & Sampling. The range includes needle, ball, metering, plug and packless valves, double block and bleed and monoweld designs, Gyrolok tube fittings, instrumentation manifolds, quick couplings, and sampling cylinders with their valves and accessories. Hoke products are used wherever sample lines, gauges, transmitters and analyzers have to be isolated, vented or sampled cleanly across process industries. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We help buyers match valve, fitting and sample cylinder part numbers to their tubing size, pressure rating and material requirements, so installations stay leak-tight and easy to maintain.
FAQ
Questions about the Hoke 1711M4Y Needle Valve, 1/4 in Male NPT, 316 SS
Answers from our engineering team on installation, compatibility and integration.
01What is the Hoke 1711M4Y?
It is a 1700 series forged body, integral bonnet needle valve in globe pattern, made of 316 stainless steel, with 1/4 inch male NPT inlet and outlet connections and a non-rotating metal stem tip.
02What pressure and temperature does the 1711M4Y handle?
The manufacturer lists 6000 psig (414 bar) at 70 degrees F (21 degrees C), with an operating temperature range of minus 65 to plus 450 degrees F (minus 54 to plus 232 degrees C).
03What is the difference between the 1711M4Y and the 1751M4Y?
Both are 1/4 inch male NPT globe valves. The 1711 series has a metal stem tip for service to 450 degrees F, while the 1751 series has a PCTFE tip rated to 250 degrees F.
04Is there a Monel version of the 1711M4Y?
Yes, the manufacturer order table shows 1711M4M as the Monel equivalent with the same 1/4 inch male NPT ends. The 1711M4Y is the 316 stainless steel version.
05How do I request a quotation for the 1711M4Y?
Send an RFQ to Seven Star LLC with the part number 1711M4Y, the quantity and the delivery location in Oman or the GCC. Mention if you also need a CE suffix version for TPED or PED.


















Reviews
There are no reviews yet.