- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Hoke
Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 in
Description
Hoke HQC4-C-316 dust cap for 1/4 inch bodies overview
The Hoke HQC4-C-316 is an accessory for the HQC series of instrumentation quick couplings. The manufacturer catalogue lists it under dust caps for bodies, in the 1/4 inch body size, and like the couplings themselves it is made of 316 stainless steel. Its job is simple: it closes the open end of a body half when no plug is connected, so that dust, dirt and moisture stay away from the sleeve, the seal faces and the valve seat. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
In a quick coupling the sealing faces are precision parts. A single hard particle on a seat or a scratch in an O-ring seal can cause a leak when the coupling is next used. A dust cap such as the Hoke HQC4-C-316 is a low cost way to protect those surfaces on fixed bodies, especially those mounted on panels in dusty outdoor plant areas.
Key features of HQC4-C-316
- 316 stainless steel dust cap for 1/4 inch HQC bodies.
- Protects the body sleeve and seal area from contamination while the line is not connected.
- Short, compact shape with dimension A of 1.45 inch.
- Same hex size of 0.63 inch as the matching 1/4 inch body.
- Listed as an accessory in the manufacturer catalogue next to the dust plug for plugs.
- Fits the series, which uses keyed sleeves for all sizes.
HQC4-C-316 technical specifications
The values below come from the accessories section of the HQC series catalogue. Because the part is a cap, the pressure and seal data below describe the coupling series it is used with and are not a pressure rating for the cap.
| Part number | HQC4-C-316 |
|---|---|
| Brand | Hoke |
| Series | HQC instrumentation quick couplings |
| Body size | 1/4 inch (HQC4) |
| Construction | 316 stainless steel; machined parts AISI 316, springs and retaining rings AISI 316 |
| Rated working pressure | 3600 psi connected and 3600 psi disconnected for the 1/4 inch size; connect under pressure up to 250 psi |
| Seals | Viton O-rings as standard, +20 to +400 degrees F, Krytox lubricant as standard |
| Type | Accessory, dust cap for body |
| Body size | 1/4 inch |
| Dimension A | 1.45 inch |
| Hex size B | 0.63 inch |
| Dimension C | 0.88 inch |
Typical applications in Oman and the GCC
Quick couplings are used in laboratories, gas distribution and biopharmaceutical work, according to the manufacturer. In Oman and the GCC the same couplings appear on analyser panels, calibration gas stations and sample points, and many are left open for long periods between uses. Fitting a HQC4-C-316 to each unused 1/4 inch body keeps sand, dust and humidity out of the coupling.
Dust caps also help with housekeeping. A capped body is easier to identify as idle and is less likely to be damaged by tools or by accidental contact. For shared calibration equipment, one cap per body is a simple rule that reduces the chance of cross contamination.
Selection and compatibility notes for HQC4-C-316
The HQC4-C-316 is for the 1/4 inch body size of the HQC4 series. Larger HQC6 and HQC8 bodies have their own caps, listed as HQC6-C-316 and HQC8-C-316, so check that the size on the part number matches the body. Confirm that the mating body is of the standard HQC design, for example the HQC4-B-4-316 or the bulkhead body HQC4-B1-4-316.
The cap is a protection accessory and is not listed with a pressure rating, so do not depend on it to hold system pressure. If the line has to be sealed against pressure, use the shutoff valve in the body or a suitable plug. Select the HQC4-C-316 for new installations as well as for replacement of lost caps. When you order, count every fixed body in the plant that is not permanently connected, including spare ports on panels and manifolds, and ask for one cap for each, plus a small allowance for loss during maintenance work. Agree the quantity with the instrument and laboratory teams before sending the request.
Installation and handling of HQC4-C-316
After disconnecting the plug, fit the cap onto the clean, dry body following the manufacturer instructions, and check that it sits fully on the body. Inspect the body face for contamination before capping, and wipe away any residue with a clean, lint free cloth. If the cap is supplied with a retaining cable, secure the cable so that the cap stays close to its body.
Maintenance
Check the cap during routine rounds for damage, deformation and thread wear, and replace it if it no longer fits well. Wash and dry caps that have been exposed to dirt. Keeping a few spare HQC4-C-316 caps in the maintenance store is inexpensive insurance for the couplings they protect.
Related products and ordering notes
Related catalogue items include the bodies HQC4-B-4-316 and HQC4-B1-4-316 and the valved plug HQC4-D-4-316. Plugs have a different accessory, the dust plug HQC4-P-316. When you ask for a quotation for the HQC4-C-316, tell us the quantity and which bodies it will protect. In short, the HQC4-C-316 is a 316 stainless steel dust cap for 1/4 inch HQC bodies.
Documents and quotation
The HQC series catalogue from the manufacturer is attached to this page as a datasheet. To request a quotation for the HQC4-C-316, send your RFQ to Seven Star LLC with the part number HQC4-C-316, the quantity needed and the delivery destination. No prices are shown on this page.
Other Models in the HQC4 Range
Seven Star LLC supplies models from the HQC4 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4 in | Instrument Valves & Fittings | View details |
| Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 in | Instrument Valves & Fittings | View details |
| Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 in | Instrument Valves & Fittings | You are viewing this model |
| Hoke HQC4-B-4-316 Quick-Connect Body with Valve, 1/4 in | Instrument Valves & Fittings | View details |
Datasheets & Documents
- Datasheet Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 in Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Hoke is an instrumentation flow-control brand specializing in small-bore valves and fittings, part of Crane Instrumentation & Sampling. The range includes needle, ball, metering, plug and packless valves, double block and bleed and monoweld designs, Gyrolok tube fittings, instrumentation manifolds, quick couplings, and sampling cylinders with their valves and accessories. Hoke products are used wherever sample lines, gauges, transmitters and analyzers have to be isolated, vented or sampled cleanly across process industries. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We help buyers match valve, fitting and sample cylinder part numbers to their tubing size, pressure rating and material requirements, so installations stay leak-tight and easy to maintain.
FAQ
Questions about the Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 in
Answers from our engineering team on installation, compatibility and integration.
01What is the Hoke HQC4-C-316?
It is a dust cap for the 1/4 inch body of the Hoke HQC series of instrumentation quick couplings, made of 316 stainless steel.
02What are the dimensions of the HQC4-C-316?
The catalogue lists dimension A as 1.45 inch, a hex of 0.63 inch and dimension C of 0.88 inch for the 1/4 inch body dust cap.
03Which parts does the HQC4-C-316 fit?
It is listed as the dust cap for HQC4 bodies, such as the HQC4-B-4-316 and the HQC4-B1-4-316. Plugs have a separate dust plug in the catalogue, the HQC4-P-316.
04Does the HQC4-C-316 hold pressure?
The catalogue lists it as an accessory dust cap and gives no pressure rating for it, so use it for protection of the open body and not as a pressure closure.
05How do I request a quotation for the HQC4-C-316?
Send an RFQ to Seven Star LLC with the part number HQC4-C-316, the quantity and the delivery location in Oman or the GCC, and mention the bodies it will protect.


















Reviews
There are no reviews yet.