Brand:

Cortem FLFE-131L Ex de LED Tube Luminaire 31 W x 1

Description

Cortem FLFE-131L overview

The Cortem FLFE-131L is a Ex de LED tube luminaire from the Cortem FLFE-…L and FLF-…L series for Zones 1, 2, 21 and 22. It has two low copper aluminium heads with G13 holders, a borosilicate glass tube and a white painted reflector frame, and takes 1 LED tube of up to 31 W.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Technical statements on this page are summarised from the manufacturer catalogue sheet for the series, and the part number to quote is Cortem FLFE-131L.

Key features of FLFE-131L

  • Tempered borosilicate glass tube resistant to heat changes
  • Easy relamping on a frame with guides
  • Bi-pin G13 holders and terminals with loop-in loop-out jumpers
  • IP66 enclosure with stainless steel hardware
  • Power factor 0.98

FLFE-131L technical specifications

Parameter Value
Series FLFE-…L (Ex de) / FLF-…L (Ex d) LED tube luminaires
Zones 1, 2, 21, 22
ATEX certificate CESI 09 ATEX 008
IECEx certificate CES 11.0021
Temperature class T6 (85 degrees C)
Ambient temperature -20 to +55 degrees C (-20 to +50 degrees C with emergency)
Ingress protection IP66
Supply 220/240 V AC, 50/60 Hz
Lamp holders Bi-pin G13
Tube Borosilicate glass, shock and heat resistant
Power factor 0.98
Terminals L, N, PE up to 4 mm2, with jumpers for loop-in/loop-out
Mounting 2 x M8 holes
Coating Polyester RAL 7035
Marking II 2GD Ex db eb op is IIC T6 Gb; Ex tb op is IIIC T71 to T80 degrees C Db
LED tubes 1 x 31 W maximum
Lumen 2700 lm
Length A / A1 1625 mm / 1540 mm
Overall size 240x230x1700
Weight 9.5 kg
Entries 2 x ISO M25; kit with PLG2IB plug and NAV25IB cable gland
Part number FLFE-131L

Values above are taken from the series catalogue. Confirm the marking and temperature class on the certificate for the exact version you order before commissioning FLFE-131L.

Typical applications in Oman and the GCC

Typical uses for FLFE-131L include refineries, petrochemical units, fuel depots, offshore and onshore plants, stair and handrail lighting and farm produce areas. In oil and gas facilities across Oman and the Gulf, explosion-protected lighting and power connection equipment is needed wherever flammable vapours, gases or combustible dust can collect. The same requirements appear in utilities and power stations with fuel handling, in water and wastewater plants where biogas or chemicals are present, and in manufacturing sites that process solvents, grain or powders.

High ambient temperatures, salt-laden coastal air and sand are common in the region, so check the rated ambient range and ingress protection of FLFE-131L against the site conditions and the area classification drawings.

Hazardous area planning considerations

Explosion-protected equipment is chosen after the plant owner has completed an area classification that defines the zone, the gas or dust group and the maximum permitted surface temperature. The equipment must then carry a certificate and marking that cover each of these three points, and the temperature class must stay below the ignition temperature of the substances present. Documentation should be kept with the plant records so inspectors can match every installed item to its certificate.

Environmental factors also matter in Gulf installations. Strong sunlight, high humidity near the coast, windblown sand and washdown with fresh water all affect gaskets, coatings and entries over time. Specifying suitable cable glands, blanking elements and sealing fittings, and tightening them to the instructions, protects the ingress rating and the integrity of the protection concept throughout the service life of the installation.

Spare-parts planning is another practical point. Maintenance teams often keep a small stock of the most exposed parts, such as gaskets, lamps, plugs or companion items, so that a failure can be corrected without waiting for a new order. Quoting the exact code from the manufacturer catalogue avoids mistakes when similar variants differ only by power, voltage, length or current rating.

Selection and compatibility notes for FLFE-131L

The FLFE-131L is the Ex de version, with an Ex e terminal housing that accepts a normal Ex cable gland. Select the length by the LED tube rating: 11 W for 725 mm, 22 W for 1325 mm and 31 W for 1625 mm bodies. Emergency versions exist and have an internal safety switch.

Always compare the zone, gas group and temperature class of FLFE-131L with the hazardous area classification of the installation, and verify cable entries, glands and accessories separately because they are listed as distinct items by the manufacturer.

Installation and commissioning

Wire the L, N and PE terminals at 220/240 V AC using the cable gland and plug supplied with the kit, then close the cover and check the gaskets.

Installation of FLFE-131L should follow the local hazardous area installation standard such as EN/IEC 60079-14 and the manufacturer instructions, and should be carried out by qualified personnel. Before energising, check enclosure integrity, earthing and the tightness of all entries.

Maintenance and inspection

Relamp by sliding out the frame. Keep the glass clean and inspect NBR gaskets and cap chains on a regular schedule.

Keep a record of inspections for FLFE-131L as part of the plant electrical inspection programme, and never modify a certified enclosure.

Related products and ordering notes

Other codes in the same series are available with different ratings, and related Ex junction boxes, cable glands, plugs and luminaires from the same manufacturer can be quoted together with FLFE-131L. When you order, state the exact code, quantity, supply voltage and the area classification so the offer matches the application.

FLFE-131L FAQ summary

Buyers most often ask what FLFE-131L is, which hazardous areas it suits, whether a datasheet is available, and how to request a quotation. The answers are listed in the FAQ on this page, and the independent supplier status of Seven Star LLC is stated above.

Documents and quotation

The manufacturer catalogue sheet for the series is attached to this page as the datasheet for FLFE-131L. To request a quotation, send the RFQ with the part number FLFE-131L and the quantity required, together with the delivery location, and we will reply with availability and lead time.

Cortem FLFE-131L vs Other Cortem Ex de LED Tube Luminaire Variants

Engineers usually shortlist the Cortem FLFE-131L after confirming FLFE-131L 31 1 against the duty point. If you are standardising spares across several units, tell us which variants are already installed so we can quote the matching Cortem FLFE-131L and any common seals, coils or accessories together.

Variant Distinguishing detail
Cortem FLFE-111L Ex de LED Tube Luminaire 11 W x 1 FLFE-111L 11 1
Cortem FLFE-211L Ex de LED Tube Luminaire 11 W x 2 FLFE-211L 11 2
Cortem FLFE-122L Ex de LED Tube Luminaire 22 W x 1 FLFE-122L 22 1
Cortem FLFE-131L Ex de LED Tube Luminaire 31 W x 1 (this page) FLFE-131L 31 1

Other Models in the Flf Range

Seven Star LLC supplies models from the Flf range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Cortem FLFE-111L Ex de LED Tube Luminaire 11 W x 1Industrial & Hazardous Area LightingView details
Cortem FLFE-211L Ex de LED Tube Luminaire 11 W x 2Industrial & Hazardous Area LightingView details
Cortem FLFE-122L Ex de LED Tube Luminaire 22 W x 1Industrial & Hazardous Area LightingView details
Cortem FLFE-131L Ex de LED Tube Luminaire 31 W x 1Industrial & Hazardous Area LightingYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Cortem FLFE-131L Ex de LED Tube Luminaire 31 W x 1 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem FLFE-131L Ex de LED Tube Luminaire 31 W x 1

Answers from our engineering team on installation, compatibility and integration.

01What is Cortem FLFE-131L?
FLFE-131L is a Cortem Ex de LED tube luminaire, 1 x 31 W from the manufacturer catalogue series, designed for use in hazardous areas as stated on its certificate.
02Which hazardous areas is FLFE-131L suitable for?
The zones, gas or dust groups and temperature class for FLFE-131L are listed in the specification table on this page and on the series certificate, which must be checked before installation.
03Is a datasheet available for FLFE-131L?
Yes. The manufacturer catalogue sheet for the series is attached to this page and contains the dimensions, certification data and code table relevant to FLFE-131L.
04Does Seven Star LLC manufacture Cortem FLFE-131L?
No. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
05How do I request a quote for FLFE-131L?
Send the RFQ with the part number FLFE-131L, the quantity, the area classification and the delivery location, and we will reply with availability and lead time.