Brand:

Woodward TecJet 50 Plus Gas Fuel Control Valve

Description

Overview

The Woodward TecJet 50 Plus is a gas fuel control valve from the Woodward range of engine control products, used for the metering and control of gaseous fuel on industrial gas engines. The valve regulates the fuel flow to the engine based on the control signal from the engine control system, providing the precise fuel metering needed for engine performance and emissions control. The part number N13246 identifies the specific TecJet 50 Plus configuration supplied.

Woodward is a major supplier of engine control systems and fuel control valves for industrial gas engines, and the TecJet family is one of the recognized fuel valve lines. The N13246 part number identifies the TecJet 50 Plus configuration for the specific engine package. Seven Star LLC supplies the valve with the Woodward documentation for installation and commissioning. The valve is a replacement part supplied for the Woodward-controlled engine package, identified by the original part number. The installation is covered by the Woodward documentation set.

Engineering and Design

The TecJet valve uses an electromechanical actuator to position the fuel metering element in response to the control command, regulating the gaseous fuel flow to the engine. The valve is designed for the fuel pressures and flow rates of industrial gas engine applications, with the response speed and metering accuracy required for closed-loop engine control. The valve construction is suited to continuous service in the engine environment.

The valve is installed in the fuel supply line of the engine according to the Woodward installation drawing, with the control wiring connected to the engine control system. During commissioning, the fuel system is checked for leaks and the valve response is verified against the control command. Maintenance follows the Woodward service instructions, with the valve inspected and tested during the scheduled engine maintenance.

The valve is installed in the fuel supply line of the engine according to the Woodward installation drawing, with the control wiring connected to the engine control system. During commissioning, the fuel system is checked for leaks and the valve response is verified against the control command. Maintenance follows the Woodward service instructions, with the valve inspected and tested during the scheduled engine maintenance. The fuel filter and the valve inlet screens are checked at the same interval, and the actuator response is logged for comparison on the next service. The valve travel and the actuator response are logged during commissioning and compared at each engine service interval. The valve is supplied with the Woodward documentation covering installation, commissioning and the recommended service intervals. The valve is inspected at the engine service interval, with the actuator response and the fuel system pressures recorded. The Woodward control parameters for the fuel valve are verified during commissioning. The fuel control valve is supplied with the installation drawing for the TecJet 50 Plus, and the control wiring is identified on the drawing. The engine control system parameters are verified with the valve installed. The fuel system inspection includes the valve inlet and the control wiring, and the results are recorded in the engine log. The Woodward spares identification is confirmed from the original part number at the time of ordering.

Key Features

  • Gas fuel control valve from the Woodward range
  • Electromechanical fuel metering for gas engines
  • Identified by part number N13246
  • Designed for industrial gas engine service
  • Precise fuel metering for engine control
  • Verified Woodward product

Applications

The TecJet 50 Plus is used for gaseous fuel control on industrial gas engines in power generation, gas compression and cogeneration applications. It suits engine operators and maintenance teams in the GCC region using Woodward fuel control products.

Specifications

Product Woodward TecJet 50 Plus gas fuel control valve
Part number N13246
Application gaseous fuel metering and control
Engine use industrial gas engines
Actuation electromechanical
Brand Woodward

Why Seven Star LLC

Seven Star LLC supplies Woodward engine control products and spare parts to power generation and gas compression operators across Oman and the GCC. Every part is verified against the original Woodward part number before your order is confirmed.

Because the N13246 part number identifies a specific TecJet 50 Plus configuration matched to a particular engine model and control system combination, we confirm this against your actual engine package before an order ships, since a fuel control valve that is mechanically similar but configured for a different engine model can behave unpredictably under closed-loop control even though it physically installs without issue. We also help operators verify their engine control system firmware version is compatible with the specific TecJet configuration being ordered, since a mismatch here can affect the fuel metering accuracy the engine’s emissions compliance depends on.

Supporting Critical Engine Uptime

An industrial gas engine in continuous power generation or gas compression service represents significant lost revenue for every hour it is down, so we help operators keep a verified spare TecJet valve on hand rather than sourcing one reactively after a failure, since Woodward fuel control components can carry meaningful lead times when ordered without advance planning. We coordinate directly with Woodward on documentation and availability so customers across Oman and the GCC are not left guessing about lead times on a component their engine’s fuel system genuinely depends on.

Request a Quote for Woodward TecJet 50 Plus Gas Fuel Control Valve

Submit a formal inquiry through our RFQ page with the valve part number N13246, your engine model and the control system in use. We will confirm the matching configuration and respond with a formal quotation. | Inquiry Form

Related Products

Datasheets & Documents
  • PDF Instruction Manual Woodward TecJet 50 Plus Gas Fuel Control Valve Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Woodward is an American designer of control systems for engines, turbines and aircraft, founded in 1870 by Amos Woodward in Rockford, Illinois, to make governors for water wheels. It is now headquartered in Fort Collins, Colorado, and listed on Nasdaq. Its governors, actuators and controllers manage speed and load on gas and steam turbines, reciprocating engines and generator sets.

Seven Star LLC sources and supplies Woodward turbine controls, synchronizers and gas fuel valves for operators in Oman and the GCC, working from the part number on the unit.

Woodward company profile

Founded 1870, Rockford, Illinois, USA, by Amos Woodward
First products Water wheel governors
Headquarters Fort Collins, Colorado
Listing Nasdaq (WWD)
Product families 505 and 505XT steam turbine controllers, easYgen genset and paralleling controls, ProAct and L-Series actuators, EGB and UG governors, MicroNet safety and control platforms, ProTech overspeed protection

Milestones

  • 1870: Amos Woodward founds the company in Rockford.
  • Today: Woodward serves aerospace and industrial markets from Fort Collins.

Woodward products listed

Three items show the spread of the industrial line. The 505XT is a digital control for industrial steam turbines with a single valve or single extraction/admission. The SPM-D10 is a synchronizing unit that matches a generator to a bus before the breaker closes. The TecJet 50 Plus is a gas fuel control valve with built-in actuator and electronics, used to meter fuel on gas engines.

Woodward products we list

Family Examples
Controllers & Data Acquisition 505 Digital Control for Steam Turbines, 505XT Digital Governor Steam Turbine Con…, easYgen-3500XT Genset and Breaker Contro…, Flex500 Digital Control for Turbines, MicroNet Plus Control System, SPM-D10 Synchronizing Unit
Control Valves TecJet 50 Plus Gas Fuel Control Valve

Ordering Woodward parts: what we need

Woodward identifies hardware by a part number in two digit groups, such as 8440-1667 for one SPM-D10 version, printed on the nameplate with a revision letter and serial number. Send all three. For a 505XT, add the supply voltage version and whether the turbine has extraction or admission. For a synchronizer, give the measuring voltage and the exact SPM-D10 variant. For a TecJet, state the fuel gas, flow size and engine control signal.

Facts checked against Woodward's own company history, October 2026.

Frequently Asked Questions

What is the Woodward TecJet 50 Plus used for?
The TecJet 50 Plus is a gas fuel control valve for the metering and control of gaseous fuel on industrial gas engines.
What is the part number of this valve?
The TecJet 50 Plus configuration in this listing is identified by the Woodward part number N13246.
How does the valve control the fuel flow?
The valve uses an electromechanical actuator to position the fuel metering element in response to the control command from the engine control system.
What maintenance is required?
The valve is inspected and tested during the scheduled engine maintenance, including a leak check and a verification of the actuator response.
What do you need to confirm before ordering?
The engine model, the control system in use and the original Woodward part number are confirmed before the matching valve configuration is supplied.