Michell EA34-TX Easidew 34 Dew-Point Transmitter 3/4 UNF

Description

Michell EA34-TX overview: Easidew 34 dew-point transmitter with 3/4 inch UNF thread

Michell EA34-TX is the parent order code of the Easidew 34, a two-wire dew-point transmitter with a 4-20 mA output and a 3/4 inch UNF process thread. It follows the same ceramic sensing technology as the Easidew family and is used where a 3/4 inch UNF port is the plant standard.

The combined Easidew datasheet lists a range of minus 110 to plus 20 degrees Celsius, an accuracy of plus or minus 2 degrees Celsius dew point, 12 to 28 V DC supply, a 450 barg pressure rating and a MiniDIN 43650 form C electrical connector.

Operators who already have 3/4 inch UNF sample blocks tend to look for this exact code.

The image shows the Easidew 34 transmitter from the manufacturer datasheet.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list Michell EA34-TX so that maintenance, instrumentation and procurement teams can quote the exact code that appears in the manufacturer documentation.

Key features of EA34-TX

  • 3/4 inch 16 UNF process connection with Viton O-ring seal.
  • Dew-point range minus 100 or minus 110 to plus 20 degrees Celsius with ppmV scaling.
  • Two-wire 4-20 mA output with MiniDIN 43650 form C connector.
  • 316 stainless steel body, IP66, NEMA 4 and a 450 barg pressure rating.
  • Optional cleaning for oxygen service and HDPE or sintered stainless steel guard.
  • Accessory range with SB-34 sample block and KF40 adaptor flange.

EA34-TX technical specifications

The table below lists values published by the manufacturer for the product family of EA34-TX. Where a value depends on the ordered configuration, the table says so and the order-code sheet governs.

Parameter Value
Order code (parent) EA34-TX, Easidew 2-wire dew-point transmitter (4-20 mA, 3/4 inch UNF thread)
Measurement range Minus 110 to plus 20 degC dp or minus 100 to plus 20 degC dp
Accuracy Plus or minus 2 degC dew point
Response time 5 minutes to T95 (dry to wet)
Repeatability 0.5 degC dew point
Output 4-20 mA two-wire
Supply voltage 12 to 28 V DC
Operating pressure 45 MPa (450 barg) maximum
Operating temperature Minus 40 to plus 60 degC
Ingress protection IP66; NEMA 4
Electrical connection MiniDIN 43650 form C
Process connection 3/4 inch 16 UNF
Weight 150 g

Typical applications of EA34-TX in Oman and the GCC

  • Compressed air dryers and general industrial dew-point monitoring.
  • Breathing air and inert gas supplies.
  • Hydrogen coolant and bulk gas applications.
  • Plants with existing 3/4 inch UNF sample blocks.

In Oman and across the GCC, moisture measurement matters wherever gas has to stay dry: gas gathering and processing plants, LNG and gas-to-power facilities, refineries and petrochemical complexes, desalination and utility compressed-air systems, and industrial gas and hydrogen users. High ambient temperatures and humidity make dryer performance and sensor drift a real operating cost, so a transmitter such as EA34-TX is usually specified against a defined dew-point or ppmV target and a documented calibration.

Selection and compatibility notes

The EA34-TX order string uses the range and guard in the same way as EA2-TX: HD for the HDPE guard and SS for the sintered stainless steel guard, plus a J1 option for oxygen service.

Choose EA34-TX only if the plant thread is 3/4 inch UNF; otherwise EA2-TX offers 5/8 inch UNF and EA2-TX-M12 offers three thread sizes.

Confirm four things before ordering EA34-TX: the dew-point or ppmV range you need, the process connection and sample handling arrangement, the hazardous-area certification that your site requires, and the electrical interface of your control system. Because Michell builds many variants from one parent code, quote the complete configured code from the order-code sheet where one applies, and tell us the operating pressure so that ppmV conversions are programmed correctly.

Installation and commissioning of EA34-TX

The order-code sheet lists SB-34 3/4 inch UNF sample block, OR-34-PK5 Viton O-rings, EA2-BLC-FIL sampling block with filter and the cable family EA2-CAB.

Mount the sensor in a sampling arrangement that delivers a clean, representative gas stream at a controlled flow, keep sample lines short and use stainless steel or other low-adsorption tubing, and avoid dead legs, because trace moisture adsorbs on tubing walls and slows the response. Wire the 4-20 mA loop with screened cable, check loop supply and load against the datasheet limits, and allow the sensor to stabilise on dry gas before judging the first readings. Record the as-found reading and the calibration certificate number at commissioning.

Maintenance, calibration and service

Service exchange EA34-TX-X and recalibration EA34-TX-Recal are listed with traceable certificates.

Ceramic moisture sensors are stable, but periodic verification keeps a dryer control loop honest. Plan recalibration or sensor exchange at the interval set by your quality system, inspect the sensor guard and seals at each visit, and replace guards that are clogged by particulates or contaminated by oil mist. If a reading drifts, check the sample system for leaks and condensate before suspecting the sensor.

Related products and ordering notes for EA34-TX

  • EA2-TX: 5/8 inch UNF version.
  • EA2-TX-M12: M12 connector version with thread choice.
  • EA-XP: explosion-proof Easidew PRO XP with 3/4 inch UNF thread.

When you request EA34-TX, tell us whether the item is for a new installation, a like-for-like replacement or a spares stock, because that changes which accessories and documents are worth adding to the same quotation. Our team can also check related codes from the same order-code sheet so that one RFQ covers the transmitter or analyzer, its consumables and its calibration needs.

Frequently asked questions about EA34-TX

  • What is EA34-TX? EA34-TX is the manufacturer parent code for the Easidew 34 dew-point transmitter with a 4-20 mA output and a 3/4 inch UNF process thread.
  • What does EA34-TX suit? It suits dew-point measurement in compressed air and process gas where a 3/4 inch UNF port is used, outside hazardous areas.
  • What is the difference between EA34-TX and EA2-TX? The main difference is the process thread: the Easidew 34 uses a 3/4 inch UNF thread, while the standard Easidew EA2-TX uses a 5/8 inch UNF thread.
  • What should I send with an RFQ for EA34-TX? Send the part number EA34-TX, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.

Documents and quotation

A manufacturer document is available for the product family of EA34-TX and we can send it with your quotation where the family datasheet applies. To request pricing and lead time, send an RFQ to Seven Star LLC with the part number EA34-TX, the quantity, the full configuration or host-instrument details, the delivery location and any certificate requirements such as material certificates or calibration documents. We will confirm availability and respond with a quotation for EA34-TX in writing.

Other Models in the Michell Easidew Range

Seven Star LLC supplies models from the Michell Easidew range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Michell EA2-TX Easidew 2-Wire Dew-Point Transmitter 5/8 UNFHumidity & Dew Point InstrumentsView details
Michell EA2-TX-M12 Easidew Dew-Point Transmitter M12 ConnectorHumidity & Dew Point InstrumentsView details
Michell EA34-TX Easidew 34 Dew-Point Transmitter 3/4 UNFHumidity & Dew Point InstrumentsYou are viewing this model
Michell EA2-OL Easidew Online Dew-Point HygrometerHumidity & Dew Point InstrumentsView details
Datasheets & Documents
  • PDF Datasheet Michell EA34-TX Easidew 34 Dew-Point Transmitter 3/4 UNF Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Michell Instruments is a British manufacturer of humidity and dew point instruments, founded in 1974 in Cambridge, England, by Andrew Michell and incorporated on 12 September 1974. It worked with Cambridge University scientists on an aluminium oxide dew point sensor and later developed chilled mirror hygrometers and hydrocarbon dew point analysers. Michell is based in Ely, Cambridgeshire, and is part of Process Sensing Technologies (PST).

Seven Star LLC lists Michell dew-point transmitters, the Condumax II analyzer and its replacement sensor parts, and supplies them to gas plants and compressed air users in Oman by exact order code.

MICHELL Instruments company profile

Founded 1974, Cambridge, England, by Andrew Michell
Headquarters Ely, Cambridgeshire, United Kingdom, since 2007
Ownership Process Sensing Technologies (PST)
Technology Ceramic and aluminium oxide moisture sensors, chilled mirror dew point, Condumax hydrocarbon dew point (licensed from Shell)
Product families Easidew and Promet dew point transmitters, S8000 and Optidew chilled mirror hygrometers, Condumax II hydrocarbon dew point analysers, MDM300 portable dew point meters, oxygen analysers

Milestones

  • 1974: Andrew Michell founds Michell Instruments in Cambridge.
  • 2007: The company moves to Ely, Cambridgeshire.
  • 2024: Michell marks 50 years, now as part of PST.

Michell product families on this page

The Condumax II is an automatic hydrocarbon dew-point analyzer for natural gas. Several of its parts are listed separately: the CD2-SCR-002 hydrocarbon dew-point sensor cell, the CD2-WDC-002 water dew-point sensor assembly and the CD2-SX-WDC-002, which is the exchange version of that water dew-point sensor. The Easidew line is represented by the Easidew EA2 dew point transmitter and by the Easidew PRO I.S., an intrinsically safe moisture transmitter for hazardous areas. A ceramic impedance moisture sensor module is also listed, the sensing element behind these transmitters.

Where Michell analyzers are used

Hydrocarbon and water dew point are contract quality parameters for natural gas, so the Condumax II is found at gas processing plants, pipeline entry points and custody transfer stations. Easidew transmitters monitor dryers for instrument air and industrial gases, glove boxes, and dry gas feeds to processes that cannot tolerate water.

MICHELL Instruments products we list

Family Examples
Gas Analyzer Systems Easidew PRO I.S. Intrinsically Safe Mois…, Michell CD2-WDC-002 Water Dew-Point Sens…, Michell Condumax II Hydrocarbon Dew-Poin…, Easidew EA2 Dew Point Transmitter, Michell OptiPEAK TDL600 Moisture in Natu…, Michell Promet EExd Process Moisture Ana…, Michell S8000 Precision Chilled Mirror H…
Gas Analyzer Accessories MICHELL CD2-SX-WDC-002 Water Dew-Point S…, Michell Ceramic Impedance Moisture Senso…, Michell Condumax II CD2-SCR-002 Hydrocar…

Ordering Michell parts: what we need

For Condumax II parts send the analyzer serial number and the part code, such as CD2-SCR-002, and state if a new assembly or the exchange item is wanted. For Easidew transmitters we need the measuring span in dew point or ppm, the process connection thread, the output signal, the operating pressure, the gas and the area certification. A photo of the label on the old transmitter usually answers most of these in one go.

Facts checked against UK Companies House records and PST's Michell 50-year material, October 2026.

FAQ

Questions about the Michell EA34-TX Easidew 34 Dew-Point Transmitter

Answers from our engineering team on installation, compatibility and integration.

01What is EA34-TX?
EA34-TX is the manufacturer parent code for the Easidew 34 dew-point transmitter with a 4-20 mA output and a 3/4 inch UNF process thread.
02What does EA34-TX suit?
It suits dew-point measurement in compressed air and process gas where a 3/4 inch UNF port is used, outside hazardous areas.
03What is the difference between EA34-TX and EA2-TX?
The main difference is the process thread: the Easidew 34 uses a 3/4 inch UNF thread, while the standard Easidew EA2-TX uses a 5/8 inch UNF thread.
04Can Seven Star LLC supply EA34-TX in Oman?
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.
05What should I send with an RFQ for EA34-TX?
Send the part number EA34-TX, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.